Uploaded January 2025 | Updated November 2026, 5 days ago
T16D/T8FB Trainer Function with Trainer Cable
There are two methods to use the trainer function. One is to connect via trainer cable and the other is to connect via RadioLink type-C wireless trainer cable.
In this tutorial, I’m going to show the trainer function with trainer cable connection.
We need a T16D, a T8FB, R16F and trainer cables.
T16D works as a coach transmitter. T8FB as a student transmitter.(T8FB cannot work as a coach transmitter. It can only work as a student transmitter)
The receiver R16F is bound to T16D, the coach transmitter successfully. And we can see the signal tower on the screen of T16D. I connect a servo to the channel 1 of the receiver to better show the trainer function.
First, connect the trainer cable. Here are the trainer cables we need. Please prepare them by yourself. We need to connect the simulator port of T16D to the simulator port of T8FB. Connect the two cables. And plug one end to T16D, the other end to T8FB. The connection is done.
Then. Set parameters on the transmitter.
Set the coach transmitter T16D. Enter the MAIN MENU--Transmitter Settings--TRAINER. And I assign SWA_UP to control the trainer function, Set the state to ON. That means when SWA is pushed up, the trainer function is turned on; when SWA is pushed down, the trainer function is turned off.
T16D is the coach transmitter, so I set the mode to Coach mode. Here are the trainer settings of T16D.
For T8FB, I just need to connect it to the mobile phone. Here is the Parameter Adjustment APP.
(For details of the Parameter Adjustment APP of T8FB, please refer to the link radiolink.com/t8fb_bt_app)
We don’t need to set anything on T8FB. Just make sure all the settings of the student transmitter are the same with the settings of the coach transmitter.
The settings are done. Return to servo display, Push SWA down, the trainer function is turned off. The servo is connected to channel 1 of the receiver. Push the joystick of T16D, the servo is controlled by the coach transmitter, T16D.
Push SWA up, the trainer function is turned on. Push the joystick of T16D, there is no response. Push the joystick of T8FB, we can see the servo is working, which means the receiver is controlled by the student transmitter, T8FB.
You can push use SWA to turn on or turn off the trainer function.
But here is one problem. When I push the channel 1 joystick of the student transmitter, the servo value on the student transmitter is different from the servo value on the coach transmitter. That is because we need to adjust the PPM value on T16D to make the student transmitter totally match the coach transmitter. How to adjust the PPM value here? Please follow the below steps.
1.Make sure the joysticks of the trainer and student transmitters have been correctly calibrated. Both of them have been calibrated before.
2.Adjust the maximum servo value of channel 1 of the student transmitter. Open the Parameter Adjustment APP. Connect. Push trim button to confirm. Connected. The EPA of channel 1 of T8FB defaults to 96. We need to set it to the largest value 120. EPA-L and EPA-R. Click WRITE to save it.
3.The trainer function is turned on. Push the channel 1 joystick of the student transmitter to the left and right sides. We can view the PPM value of CH1 IN of the student transmitter on T16D. We can see the PPM maximum is 1627, PPM minimum is 379, PPM middle is about 1002. So we need to adjust PPM MIN to 379, set PPM MAX to 1627, and PPM MID to 1002.
4.After the setting, set the EPA of the channel 1 of the student transmitter back to the original value. It defaults to 96. So I set it back to 96. Click WRITE to save it.
Push SWA up, the trainer function is turned on. T8FB controls the the servo. The servo value of T8FB match the servo value of T16D, (The default end points of T8FB is 96. )
which means the student transmitter totally match the coach transmitter.
If you are using transmitters from other brands, you can also refer to the steps to adjust the PPM value.
So that is the trainer function of T16D and T8FB via trainer cable.
For more details of T16D, please refer to the link:
radiolink.com/t16d
If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
#transmitter #radiolink
T16D/T8FB Trainer Function with Trainer Cable
There are two methods to use the trainer function. One is to connect via trainer cable and the other is to connect via RadioLink type-C wireless trainer cable.
In this tutorial, I’m going to show the trainer function with trainer cable connection.
We need a T16D, a T8FB, R16F and trainer cables.
T16D works as a coach transmitter. T8FB as a student transmitter.(T8FB cannot work as a coach transmitter. It can only work as a student transmitter)
The receiver R16F is bound to T16D, the coach transmitter successfully. And we can see the signal tower on the screen of T16D. I connect a servo to the channel 1 of the receiver to better show the trainer function.
First, connect the trainer cable. Here are the trainer cables we need. Please prepare them by yourself. We need to connect the simulator port of T16D to the simulator port of T8FB. Connect the two cables. And plug one end to T16D, the other end to T8FB. The connection is done.
Then. Set parameters on the transmitter.
Set the coach transmitter T16D. Enter the MAIN MENU--Transmitter Settings--TRAINER. And I assign SWA_UP to control the trainer function, Set the state to ON. That means when SWA is pushed up, the trainer function is turned on; when SWA is pushed down, the trainer function is turned off.
T16D is the coach transmitter, so I set the mode to Coach mode. Here are the trainer settings of T16D.
For T8FB, I just need to connect it to the mobile phone. Here is the Parameter Adjustment APP.
(For details of the Parameter Adjustment APP of T8FB, please refer to the link radiolink.com/t8fb_bt_app)
We don’t need to set anything on T8FB. Just make sure all the settings of the student transmitter are the same with the settings of the coach transmitter.
The settings are done. Return to servo display, Push SWA down, the trainer function is turned off. The servo is connected to channel 1 of the receiver. Push the joystick of T16D, the servo is controlled by the coach transmitter, T16D.
Push SWA up, the trainer function is turned on. Push the joystick of T16D, there is no response. Push the joystick of T8FB, we can see the servo is working, which means the receiver is controlled by the student transmitter, T8FB.
You can push use SWA to turn on or turn off the trainer function.
But here is one problem. When I push the channel 1 joystick of the student transmitter, the servo value on the student transmitter is different from the servo value on the coach transmitter. That is because we need to adjust the PPM value on T16D to make the student transmitter totally match the coach transmitter. How to adjust the PPM value here? Please follow the below steps.
1.Make sure the joysticks of the trainer and student transmitters have been correctly calibrated. Both of them have been calibrated before.
2.Adjust the maximum servo value of channel 1 of the student transmitter. Open the Parameter Adjustment APP. Connect. Push trim button to confirm. Connected. The EPA of channel 1 of T8FB defaults to 96. We need to set it to the largest value 120. EPA-L and EPA-R. Click WRITE to save it.
3.The trainer function is turned on. Push the channel 1 joystick of the student transmitter to the left and right sides. We can view the PPM value of CH1 IN of the student transmitter on T16D. We can see the PPM maximum is 1627, PPM minimum is 379, PPM middle is about 1002. So we need to adjust PPM MIN to 379, set PPM MAX to 1627, and PPM MID to 1002.
4.After the setting, set the EPA of the channel 1 of the student transmitter back to the original value. It defaults to 96. So I set it back to 96. Click WRITE to save it.
Push SWA up, the trainer function is turned on. T8FB controls the the servo. The servo value of T8FB match the servo value of T16D, (The default end points of T8FB is 96. )
which means the student transmitter totally match the coach transmitter.
If you are using transmitters from other brands, you can also refer to the steps to adjust the PPM value.
So that is the trainer function of T16D and T8FB via trainer cable.
For more details of T16D, please refer to the link:
radiolink.com/t16d
If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
#transmitter #radiolink










