Uploaded April 2024 | Updated November 2026, 5 days ago
RSSI, or“Received Signal Strength Indicator,”is a measurement of how well your receiver can hear a signal from the transmitter.
When there is control problem of T8FB transmitter, such as short control range, signal loss, please test RSSI. It is also recommended to test RSSI before the flight, in order to avoid loss of control due to signal problems.
How to test RSSI with T8FB transmitter? I’ll show it with T8FB transmitter and R8EF receiver.
At first, we need to install the Parameter Adjustment APP for T8FB. T8FB has no screen. So we can view all the settings on the APP. We can check the RSSI value on the APP to confirm the successful binding and also the signal strength.
The Parameter Adjustment APP for T8FB can be installed on computer or your mobile phones. You can get more information of the APP from our official website (radiolink.com/t8fb_bt_app)
I have already installed the APP on my iPhone. Here it is. Open it. Click CONNECT, a list of devices will pop out for selection.
(Note: For T8FB OTG, please use OTG cable to connect the transmitter to the mobile phone)
Select RadioLink. T8FB will emit DD sounds. Press any one of the trimmer button to stop the DD sounds. And the servo range will display on the APP. Move the joysticks, the bars move accordingly, means that the transmitter is connected to the APP.
And you can check the RSSI value here. It shows NULL, so there is no signal. Because receiver is not powered on.
Now. Power on R8EF receiver. The RSSI does not show NULL, because I have already bound the receiver to the transmitter. (You can check binding tutorial from the description of the video)
Move the receiver, RSSI value will change, because RSSI value will keep changing according to the distance between the transmitter and the receiver.
How to test RSSI with T8FB transmitter and receivers?
T8FB has a built-in antenna, which is placed vertically, like this.
We need to make the antenna of R8EF and T8FB parallel. So we place R8EF receiver antenna vertically, like this.
Keep transmitter antenna apart from receiver antenna about 30 centimeters. Then check RSSI value.
It is normal that RSSI value is within the range of 0 to -30dBm when the distance between the transmitter and receiver is 30 centimeters. The closer the value is to 0, the stronger the signal is.
Then we need to view RSSI value on the APP. The RSSI value is *** in about 30 centimeters distance, which is within the range of 0 to -30dBm, and the RSSI value is stable. So there is no problem of signal transmission.
The range of RSSI value of RadioLink transmitters is from 0 to -99dBm. The larger the absolute value of the RSSI value is, the weaker the signal is. For example, the signal when the RSSI value is -80dBm is weaker than the signal when the RSSI value is -60dBm.
If the RSSI value is not within the range of 0 to -30dBm in about 30 cemtimeters distance, there is something wrong with the signal transmission. Please check whether the antennas of the receiver and transmitter are damaged, especially the transparent part in the top of the antenna. Most signal degradation is caused by receiver antenna damage. If the receiver antenna is damaged, it needs to be replaced.
(All accessories of RadioLink products are available in Radiolink Official Store on AliExpress, so antenna is available in Radiolink Official Store)
If there is no antenna damage, you can test whether it is the failure of the transmitter or the receiver by replacing the receiver.
If RSSI is within the range of 0 to -30dBm in 30 centimeters distance and the antenna is not damaged, but the control range is short, check the possible reasons on the screen:
1.Check if there is any interference in the surrounding area, such as electricity substation, high voltage cable or wifi nearby.
2.Check installation of receiver. Do not get the receiver close to ESC, galvanometer, any metal or carbon fiber part of the aircraft. Make sure the end of the receiver antenna protruded to the outside to avoid the signal being blocked by the frame of the model.
3.Check the placement of the transmitter antenna. For example, if you want to fly the aircraft high, keep the antenna of the transmitter parallel to the ground; if you want to fly the aircraft far away, it is best to keep the antenna of the transmitter erected and vertical to the ground, so that the signal will be stronger.
That’s all about how to test RSSI with T8FB transmitter and receivers.
More details about T8FB:
radiolink.com/t8fb_bt
You can buy T8FB from the link:
radiolink.com/t8fb_bt_where_to_buy
More videos of T8FB:
radiolink.com/t8fb_bt_video
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.
#rcplane #transmitter #radiolink
RSSI, or“Received Signal Strength Indicator,”is a measurement of how well your receiver can hear a signal from the transmitter.
When there is control problem of T8FB transmitter, such as short control range, signal loss, please test RSSI. It is also recommended to test RSSI before the flight, in order to avoid loss of control due to signal problems.
How to test RSSI with T8FB transmitter? I’ll show it with T8FB transmitter and R8EF receiver.
At first, we need to install the Parameter Adjustment APP for T8FB. T8FB has no screen. So we can view all the settings on the APP. We can check the RSSI value on the APP to confirm the successful binding and also the signal strength.
The Parameter Adjustment APP for T8FB can be installed on computer or your mobile phones. You can get more information of the APP from our official website (radiolink.com/t8fb_bt_app)
I have already installed the APP on my iPhone. Here it is. Open it. Click CONNECT, a list of devices will pop out for selection.
(Note: For T8FB OTG, please use OTG cable to connect the transmitter to the mobile phone)
Select RadioLink. T8FB will emit DD sounds. Press any one of the trimmer button to stop the DD sounds. And the servo range will display on the APP. Move the joysticks, the bars move accordingly, means that the transmitter is connected to the APP.
And you can check the RSSI value here. It shows NULL, so there is no signal. Because receiver is not powered on.
Now. Power on R8EF receiver. The RSSI does not show NULL, because I have already bound the receiver to the transmitter. (You can check binding tutorial from the description of the video)
Move the receiver, RSSI value will change, because RSSI value will keep changing according to the distance between the transmitter and the receiver.
How to test RSSI with T8FB transmitter and receivers?
T8FB has a built-in antenna, which is placed vertically, like this.
We need to make the antenna of R8EF and T8FB parallel. So we place R8EF receiver antenna vertically, like this.
Keep transmitter antenna apart from receiver antenna about 30 centimeters. Then check RSSI value.
It is normal that RSSI value is within the range of 0 to -30dBm when the distance between the transmitter and receiver is 30 centimeters. The closer the value is to 0, the stronger the signal is.
Then we need to view RSSI value on the APP. The RSSI value is *** in about 30 centimeters distance, which is within the range of 0 to -30dBm, and the RSSI value is stable. So there is no problem of signal transmission.
The range of RSSI value of RadioLink transmitters is from 0 to -99dBm. The larger the absolute value of the RSSI value is, the weaker the signal is. For example, the signal when the RSSI value is -80dBm is weaker than the signal when the RSSI value is -60dBm.
If the RSSI value is not within the range of 0 to -30dBm in about 30 cemtimeters distance, there is something wrong with the signal transmission. Please check whether the antennas of the receiver and transmitter are damaged, especially the transparent part in the top of the antenna. Most signal degradation is caused by receiver antenna damage. If the receiver antenna is damaged, it needs to be replaced.
(All accessories of RadioLink products are available in Radiolink Official Store on AliExpress, so antenna is available in Radiolink Official Store)
If there is no antenna damage, you can test whether it is the failure of the transmitter or the receiver by replacing the receiver.
If RSSI is within the range of 0 to -30dBm in 30 centimeters distance and the antenna is not damaged, but the control range is short, check the possible reasons on the screen:
1.Check if there is any interference in the surrounding area, such as electricity substation, high voltage cable or wifi nearby.
2.Check installation of receiver. Do not get the receiver close to ESC, galvanometer, any metal or carbon fiber part of the aircraft. Make sure the end of the receiver antenna protruded to the outside to avoid the signal being blocked by the frame of the model.
3.Check the placement of the transmitter antenna. For example, if you want to fly the aircraft high, keep the antenna of the transmitter parallel to the ground; if you want to fly the aircraft far away, it is best to keep the antenna of the transmitter erected and vertical to the ground, so that the signal will be stronger.
That’s all about how to test RSSI with T8FB transmitter and receivers.
More details about T8FB:
radiolink.com/t8fb_bt
You can buy T8FB from the link:
radiolink.com/t8fb_bt_where_to_buy
More videos of T8FB:
radiolink.com/t8fb_bt_video
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.
#rcplane #transmitter #radiolink










