SWITCH SETTING Function of T16D/T12D @Radiolink_official
SWITCH SETTING Function of T16D/T12D  @Radiolink_official
Uploaded August 2024 | Updated November 2026, 5 hours ago
SWITCH SETTING Function of T16D/T12D 
Take T12D as an example.
Press Mode button to enter MAIN MENU-- Transmitter Settings-- SWITCH SETTINGS.
You can see the switches here. For T16D transmitter, there will be more switches listed here.
This function can set 2 position switches as 3 position switches, or the 3 position switches as 2 position switches. If the physical switch is replaced, this function can be used to set the corresponding switch type.
2POS means 2 position switch. 3POS means 3 position switch.
For example, SWA is a 2 position switch. When I set SWA to 3 position switch, it will become a 3 position switch. I’ll show it. Enter General Settings-- AUX-CH. I assign SWA to control any one channel, such as channel 5. Enter MONITOR. Push SWA Up and down, the servo value will be -100 and 100. Keep holding SWA in the middle position, the servo value is 0, which means SWA is a 3 position now.
You can also replace SWD with a 3 position switch. Then you can change it to a 3 position switch completely.
For 3 position switches such as SWC , if you set it to a 2 position switch, it will work as a 2 position switch.
Enter the next setting page.
SWITCH SELF CHECK is to check the switch position. You can turn it on/off.
If you need to put switches in a specific position when the transmitter is turned on, you can turn on the switch self check.
For example: if I need to push SWA down when I power on the transmitter. I set SWA to down, and turn on the self-check. We can see that SWA is in the up position, which is not what you want.
Now let’s power off the transmitter, and then power it on. See what happens.
When you power it on, there is a prompt: SWA is not in the set position. Press down. You need to push SWA down to make it in the proper position.
If you don’t need the switch self-check function. You can turn it off in switch settings menu.

For more details of T16D, please refer to the link:
radiolink.com/t16d

For more details of T12D, please refer to the link:
radiolink.com/t12d

If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn

#transmitter #radiolink
SWITCH SETTING Function of T16D/T12DHow to Customize the Stick Mode/Switch on T8S/T8FB?RadioLink Intelligent Electronic Scoring Goal for F9A-A, -B Brushless Soccer DroneThrottle Cut Function of T8S/T8FB TransmitterLet me see — whose RC8X is having this much fun?😏🎮How to Update the Firmware of ATA ELRS 1W?RadioLink Automatic Driving Control System (ADCS) for Agricultural Machinery VehiclesHow to Transfer Models between T16D Transmitters?Radiolink A560 3D airplane  #radiolink #fpv #drone #rcplane #fpvdrone #aircraft  #rcairplane  #rcRadioLink SU27 Flight Video: Stable, Portable, and Incredible! #SU27 #radiolink #airshow #rc #racingHow to Calibrate ESC with RadioLink RC8X Transmitter?How to Restore Customized Model Settings on T16D/T12D?
RadioLink |

SWITCH SETTING Function of T16D/T12D

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER