Uploaded November 2025 | Updated November 2026, 5 hours ago
How to Update the Firmware of ATA ELRS 1W?
We need to prepare a Type-C cable. Make sure the cable has data transmission function. And we also need a tweezer to press the button on the module.
Here are the steps to Update the latest Firmware of ATA ELRS 1W:
1.Download the flash_download_tool and the latest firmware on RadioLink official website.
(RadioLink official website:https://www.radiolink.com.cn)
2.Enter firmware update status.
3.Update the firmware by using the flash_download_tool.
1.Download the flash_download_tool and the latest firmware on RadioLink official website.
Please pay attention. ATA ELRS 1W does not support firmware from ExpressLRS website. It only supports firmware from RadioLink official website. So we need to download the firmware on RadioLink official website.
Enter RadioLink official website. Radio--ELRS 1W--Firmware.
(RadioLink official website:https://www.radiolink.com.cn)
You can download all the files you need and check all the steps to update the firmware here.
There are two files we need to download. One is flash_download_tool, the tool used to update the firmware.
The other one is firmware.
Download both of them on the desktop.
2.Enter firmware update status.
Here is a button on the side of the module. We need to press and hold the button, and plug in the Type-C cable at the same time to enter the firmware update status.
Connect one end of the Type-C cable to the computer. Put the other end of the cable near the port of the module, but it is not plugged in.
Use the tweezer to press and hold the button, and plug in the Type-C cable at the same time.
Please note: It is normal that the LED light of the module will not be on. If the LED light of the module is on, the module is only powered on, not in firmware update status. Please unplug the Type-c cable. Press the button and connect the Type-C cable at the same time to enter the firmware update status.
3.Update the firmware by using the flash_download_tool.
These are the two files we have downloaded. But pay attention, The flash_download_tool is a zip file. We need to unzip it. You can search unzip software online if there is no such software on your computer.
Unzip it. There is a folder after you unzip it.
Open the folder. Here is the flash_download_tool. Open it.
The chip type is ESP32. Click the chart here. And select the firmware I have downloaded on the desktop. Open it.
Check it, and input 0.
Select the COM port. There is only one COM port, which is COM 13.
Select the Baud Rate as 460,800.
Click Start.
Wait for the green bar to complete.
The green bar is complete and we can see the flash finish here. So the firmware update is successful.
For more details of ATA ELRS 1W:https://www.radiolink.com.cn/elrs_1w
#elrs #transmitter #radiolink
How to Update the Firmware of ATA ELRS 1W?
We need to prepare a Type-C cable. Make sure the cable has data transmission function. And we also need a tweezer to press the button on the module.
Here are the steps to Update the latest Firmware of ATA ELRS 1W:
1.Download the flash_download_tool and the latest firmware on RadioLink official website.
(RadioLink official website:https://www.radiolink.com.cn)
2.Enter firmware update status.
3.Update the firmware by using the flash_download_tool.
1.Download the flash_download_tool and the latest firmware on RadioLink official website.
Please pay attention. ATA ELRS 1W does not support firmware from ExpressLRS website. It only supports firmware from RadioLink official website. So we need to download the firmware on RadioLink official website.
Enter RadioLink official website. Radio--ELRS 1W--Firmware.
(RadioLink official website:https://www.radiolink.com.cn)
You can download all the files you need and check all the steps to update the firmware here.
There are two files we need to download. One is flash_download_tool, the tool used to update the firmware.
The other one is firmware.
Download both of them on the desktop.
2.Enter firmware update status.
Here is a button on the side of the module. We need to press and hold the button, and plug in the Type-C cable at the same time to enter the firmware update status.
Connect one end of the Type-C cable to the computer. Put the other end of the cable near the port of the module, but it is not plugged in.
Use the tweezer to press and hold the button, and plug in the Type-C cable at the same time.
Please note: It is normal that the LED light of the module will not be on. If the LED light of the module is on, the module is only powered on, not in firmware update status. Please unplug the Type-c cable. Press the button and connect the Type-C cable at the same time to enter the firmware update status.
3.Update the firmware by using the flash_download_tool.
These are the two files we have downloaded. But pay attention, The flash_download_tool is a zip file. We need to unzip it. You can search unzip software online if there is no such software on your computer.
Unzip it. There is a folder after you unzip it.
Open the folder. Here is the flash_download_tool. Open it.
The chip type is ESP32. Click the chart here. And select the firmware I have downloaded on the desktop. Open it.
Check it, and input 0.
Select the COM port. There is only one COM port, which is COM 13.
Select the Baud Rate as 460,800.
Click Start.
Wait for the green bar to complete.
The green bar is complete and we can see the flash finish here. So the firmware update is successful.
For more details of ATA ELRS 1W:https://www.radiolink.com.cn/elrs_1w
#elrs #transmitter #radiolink










