How to Replace the Steering Wheel of RC8P? @Radiolink_official
How to Replace the Steering Wheel of RC8P?  @Radiolink_official
Uploaded August 2026 | Updated November 2026, 5 hours ago
How to Replace the Steering Wheel of RC8P?
This steering wheel is made of Aluminum alloy. It comes with some accessory parts. The wheel is compatible with RadioLink RC8P/RC8X/RC6GS V3/RC6GS V2/RC6GS/RC4GS V3/RC4GS V2//RC4GS transmitters. You can buy it from our AliExpress official store. Let’s check how to replace the wheel on RC8P.
(RadioLink AliExpress official store:
radiolink.aliexpress.com/store/1101309511)
To replace the wheel, we just need to loosen this screw, remove the wheel, and install the new wheel.
First, we need to remove the original wheel. RC8P comes with a hex wrench, which can be used to remove or install the wheel. I use another one with a handle to operate. loose the screw. Pull out the steering wheel slowly.
Next, Install the new wheel.
Before installing the wheel, we need to put the a spacer into the slot where the wheel is installed. The spacer can prevent the friction between the wheel and the body of RC8P. You can contact our AliExpress salesperson to ask for the spacer if you want to install the wheel on RC8P.
Put in the spacer and then install the wheel.
The shape of the grooves on the wheel must match the shape of the protrusions here, so the wheel can be inserted. Push the wheel inside to a suitable position, ensuring it is neither too tight nor too loose. Turn the wheel and we can see it works well.
Then we need a screw from the accessory parts of the wheel. This one. It is a bit longer than the original screw. Tighten the screw with the hex wrench. The wheel is stalled.
Power on RC8P. Turn the wheel, we can see the servo value of the steering here.
After the new wheel is installed, we need to calibrate the wheel to make sure it works correctly.
Short press the scroll key to enter the setting menu. Scroll the key down to CALIBRATE menu.
Short press the scroll key to start the calibration;
Center calibration: Center the steering wheel and throttle trigger to their neutral positions. The steering wheel and throttle trigger will return to the center automatically.
Turn the VR knob to the center. Then short press the scroll key to the next step;
Max/Min calibration: Turn the steering wheel clockwise and counterclockwise to the end;
Pull the throttle trigger to the maximum and minimum position;
Turn the VR knob clockwise and counterclockwise to the end.
Then short press the scroll key to confirm;
Calibration success means the calibration is done. Press the scroll key to exit.
Short press the power button to the MONITOR.
Turn the steering wheel, the servo value displays normally, which means the wheel works well.
So that’s all about how to replace the steering wheel of RC8P.
If there’s an RC8P setting you want me to break down, drop it in the comments. Your question could be the topic of my next video.

If any question please feel free to contact us. Our email is after_service@radiolink.com.cn

#rccar #rccars #rccrawler #radiolink #rc8p
How to Replace the Steering Wheel of RC8P?SWITCH SETTING Function of T16D/T12DHow to Customize the Stick Mode/Switch on T8S/T8FB?RadioLink Intelligent Electronic Scoring Goal for F9A-A, -B Brushless Soccer DroneThrottle Cut Function of T8S/T8FB TransmitterLet me see — whose RC8X is having this much fun?😏🎮How to Update the Firmware of ATA ELRS 1W?RadioLink Automatic Driving Control System (ADCS) for Agricultural Machinery VehiclesHow to Transfer Models between T16D Transmitters?Radiolink A560 3D airplane  #radiolink #fpv #drone #rcplane #fpvdrone #aircraft  #rcairplane  #rcRadioLink SU27 Flight Video: Stable, Portable, and Incredible! #SU27 #radiolink #airshow #rc #racingHow to Calibrate ESC with RadioLink RC8X Transmitter?
RadioLink |

How to Replace the Steering Wheel of RC8P?

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER