Uploaded October 2023 | Updated November 2026, 5 days ago
AT10II/AT9S Pro Self Centering Throttle Stick Adjustment
Take AT10II as an example in the video.
Remove the back shell of AT10II.
Unplug the simulator connector.
We can see the metal sheets on the throttle joystick. To make Throttle Stick self-centred by itself, we need to remove the metal sheets and install the Throttle Return Accessory, which comes with AT10II. It contains a hook and a spring.
loosen the four screws. Remove the metal sheets. Then install the hook.
There is a steel nail next to the joystick.
And there is a small hole in the hook.
The hook with protruding part faces inward.
Hang the hook on the steel nail
Use a tweezer to pick up the spring. Hook one end of the spring to the joystick, and the other end to the hook. Then the Throttle Stick is self-centered.
After converting the throttle stick to be self-centering, please remember to calibrate the stick of the transmitter. Check the tutorial links in the description to calibrate the joystick.
Know more details about AT9S Pro via:
radiolink.com/at9spro
Buy AT9S Pro via:
radiolink.com/at9spro_where_to_buy
Know more details about AT10II via:
radiolink.com/at10ii
Buy AT10II via:
radiolink.com/at10ii_where_to_buy
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.
AT10II/AT9S Pro Self Centering Throttle Stick Adjustment
Take AT10II as an example in the video.
Remove the back shell of AT10II.
Unplug the simulator connector.
We can see the metal sheets on the throttle joystick. To make Throttle Stick self-centred by itself, we need to remove the metal sheets and install the Throttle Return Accessory, which comes with AT10II. It contains a hook and a spring.
loosen the four screws. Remove the metal sheets. Then install the hook.
There is a steel nail next to the joystick.
And there is a small hole in the hook.
The hook with protruding part faces inward.
Hang the hook on the steel nail
Use a tweezer to pick up the spring. Hook one end of the spring to the joystick, and the other end to the hook. Then the Throttle Stick is self-centered.
After converting the throttle stick to be self-centering, please remember to calibrate the stick of the transmitter. Check the tutorial links in the description to calibrate the joystick.
Know more details about AT9S Pro via:
radiolink.com/at9spro
Buy AT9S Pro via:
radiolink.com/at9spro_where_to_buy
Know more details about AT10II via:
radiolink.com/at10ii
Buy AT10II via:
radiolink.com/at10ii_where_to_buy
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.










