Uploaded November 2026 | Updated November 2026, 3 days ago
Having trouble removing a stuck drill bit from your cordless drill? I recently ran into this problem with my Makita impact driver. The drill bit was stuck so tightly in the chuck that pulling back on the release collar wouldn't release it.
After trying several things, I found a simple solution using a zip tie and a pair of needle-nose pliers.
In this video, I'll show you how I used the zip tie to keep the quick-release collar extended, then used the pliers as a small pry bar to help remove the stuck drill bit. I had seen someone else use a similar technique with a pry bar, but since I couldn't find mine, I improvised with what I had available.
I'll also show you how penetrating oil can help loosen a stubborn bit. If you don't have commercial penetrating oil such as Liquid Wrench, I'll discuss a homemade alternative using one part kerosene and one part automatic transmission fluid.
A word of caution: Kerosene and transmission fluid are flammable. Use any homemade penetrating oil sparingly, with adequate ventilation, and keep it away from flames, sparks, and other ignition sources.
Fortunately, after removing the bit, I was able to reinstall it, and the chuck continued to work. I also discovered that other drill bits worked normally, so the original bit may have been the source of the problem.
Sometimes a little ingenuity and a few tools you already have around the house can solve an aggravating problem!
Thanks for watching!
Robb
My most popular videos
youtube.com/@RobbsHomemadeLife/videos?view=0&sort=p&shelf_id=1
Some viewers like to see the stuff I have bought and liked on Amazon in my Amazon store.
My Amazon store affiliate links
amazon.com/shop/robbshomemadelife/list/3IDHXEBDQ30FI?ref_=aip_sf_list_spv_ofs_mixed_d
Robb Moffett
Robb's Homemade Life
youtube.com/user/mrhulot101
Having trouble removing a stuck drill bit from your cordless drill? I recently ran into this problem with my Makita impact driver. The drill bit was stuck so tightly in the chuck that pulling back on the release collar wouldn't release it.
After trying several things, I found a simple solution using a zip tie and a pair of needle-nose pliers.
In this video, I'll show you how I used the zip tie to keep the quick-release collar extended, then used the pliers as a small pry bar to help remove the stuck drill bit. I had seen someone else use a similar technique with a pry bar, but since I couldn't find mine, I improvised with what I had available.
I'll also show you how penetrating oil can help loosen a stubborn bit. If you don't have commercial penetrating oil such as Liquid Wrench, I'll discuss a homemade alternative using one part kerosene and one part automatic transmission fluid.
A word of caution: Kerosene and transmission fluid are flammable. Use any homemade penetrating oil sparingly, with adequate ventilation, and keep it away from flames, sparks, and other ignition sources.
Fortunately, after removing the bit, I was able to reinstall it, and the chuck continued to work. I also discovered that other drill bits worked normally, so the original bit may have been the source of the problem.
Sometimes a little ingenuity and a few tools you already have around the house can solve an aggravating problem!
Thanks for watching!
Robb
My most popular videos
youtube.com/@RobbsHomemadeLife/videos?view=0&sort=p&shelf_id=1
Some viewers like to see the stuff I have bought and liked on Amazon in my Amazon store.
My Amazon store affiliate links
amazon.com/shop/robbshomemadelife/list/3IDHXEBDQ30FI?ref_=aip_sf_list_spv_ofs_mixed_d
Robb Moffett
Robb's Homemade Life
youtube.com/user/mrhulot101










