Uploaded May 2026 | Updated November 2026, 1 day ago
Control the ACC Simulator's 3D control panel with zero hardware โ bridge it to the Do-More Designer simulator over Modbus TCP and run real BRX ladder logic.
โก QUICK ANSWER
You can control the ACC PLC Simulator's 3D control panel scene with real PLC ladder logic and no hardware at all โ everything runs on one PC. The trick is Modbus TCP: the browser-based 3D scene talks to a small helper program, the ACC Modbus Bridge (which runs on Node.js), and the bridge exchanges I/O with the built-in simulator in Do-More Designer. You install Node.js, download and start the ACC Modbus Bridge, and connect the 3D scene to it. Then in Do-More Designer you create a simulator project, start the simulator, configure a Modbus TCP client device and the I/O scanner pointed at the bridge, write your ladder logic, and put it in Run mode. Now toggling the 3D scene's inputs drives your logic, and your outputs drive the 3D scene โ real BRX programming against a virtual machine. The full step-by-step, address map, and downloads are in the written guide below.
๐ฎ THE ACC PLC SIMULATOR (free 3D scenes, right in your browser)
accautomation.ca/simulator
๐ FULL STEP-BY-STEP + DOWNLOADS (address map, ACC Modbus Bridge, ladder logic)
accautomation.ca/control-3d-plc-scenes-with-zero-hardware-heres-how
โฑ๏ธ TIMESTAMPS
0:00 - Introduction: Control 3D PLC Scenes With Zero Hardware
0:56 - What You Need
1:44 - How It Works
2:29 - The Modbus Address Map
2:43 - Step 1: Install Node.js
3:11 - Step 2: Download & Install the ACC Modbus Bridge
4:41 - Step 3: Start the ACC Modbus Bridge
5:38 - Step 4: Connect the 3D Scene to the Bridge
6:10 - Step 5: Install Do-More Designer
6:37 - Step 6: Create a New Simulator Project
6:52 - Step 7: Start the Do-More Simulator
7:21 - Step 8: Configure the Modbus TCP Client Device
8:22 - Step 9: Configure the Modbus I/O Scanner
10:10 - Step 10: Write the Ladder Logic
11:38 - Step 11: Put the Simulator in Run Mode
12:06 - Step 12: Test the Connection
13:00 - Troubleshooting
14:17 - What You Learned
๐ WHAT YOU'LL LEARN
โ How to control the ACC 3D scene with real ladder logic and no hardware
โ Install Node.js and run the ACC Modbus Bridge that links the scene to the PLC
โ Connect the browser-based 3D scene to the bridge
โ Configure a Modbus TCP client device and I/O scanner in Do-More Designer
โ Write ladder logic on the built-in simulator and test it against the 3D scene
โ FREQUENTLY ASKED
Q: Can I control a 3D PLC scene without any hardware?
A: Yes โ the ACC 3D scene connects to the Do-More Designer simulator over Modbus TCP through the ACC Modbus Bridge, so you write and run real ladder logic on one PC with no PLC. The full setup is in the guide.
Q: What is the ACC Modbus Bridge?
A: It's a small helper program (running on Node.js) that passes I/O between the browser-based 3D scene and the Do-More simulator over Modbus TCP, so the two can talk on a single PC.
Q: Do I write real PLC code, or is it simplified?
A: Real code โ you write actual BRX Do-More ladder logic in Do-More Designer and run it on the built-in simulator; the 3D scene is just the machine it controls.
๐ Full step-by-step & downloads: accautomation.ca/control-3d-plc-scenes-with-zero-hardware-heres-how
๐ MORE RESOURCES
โถ Free ACC PLC Simulator: accautomation.ca/simulator
โถ BRX Do-More PLC Series: accautomation.ca/series/brx-do-more-plc
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #BRXPLC #DoMore #ModbusTCP #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca
Control the ACC Simulator's 3D control panel with zero hardware โ bridge it to the Do-More Designer simulator over Modbus TCP and run real BRX ladder logic.
โก QUICK ANSWER
You can control the ACC PLC Simulator's 3D control panel scene with real PLC ladder logic and no hardware at all โ everything runs on one PC. The trick is Modbus TCP: the browser-based 3D scene talks to a small helper program, the ACC Modbus Bridge (which runs on Node.js), and the bridge exchanges I/O with the built-in simulator in Do-More Designer. You install Node.js, download and start the ACC Modbus Bridge, and connect the 3D scene to it. Then in Do-More Designer you create a simulator project, start the simulator, configure a Modbus TCP client device and the I/O scanner pointed at the bridge, write your ladder logic, and put it in Run mode. Now toggling the 3D scene's inputs drives your logic, and your outputs drive the 3D scene โ real BRX programming against a virtual machine. The full step-by-step, address map, and downloads are in the written guide below.
๐ฎ THE ACC PLC SIMULATOR (free 3D scenes, right in your browser)
accautomation.ca/simulator
๐ FULL STEP-BY-STEP + DOWNLOADS (address map, ACC Modbus Bridge, ladder logic)
accautomation.ca/control-3d-plc-scenes-with-zero-hardware-heres-how
โฑ๏ธ TIMESTAMPS
0:00 - Introduction: Control 3D PLC Scenes With Zero Hardware
0:56 - What You Need
1:44 - How It Works
2:29 - The Modbus Address Map
2:43 - Step 1: Install Node.js
3:11 - Step 2: Download & Install the ACC Modbus Bridge
4:41 - Step 3: Start the ACC Modbus Bridge
5:38 - Step 4: Connect the 3D Scene to the Bridge
6:10 - Step 5: Install Do-More Designer
6:37 - Step 6: Create a New Simulator Project
6:52 - Step 7: Start the Do-More Simulator
7:21 - Step 8: Configure the Modbus TCP Client Device
8:22 - Step 9: Configure the Modbus I/O Scanner
10:10 - Step 10: Write the Ladder Logic
11:38 - Step 11: Put the Simulator in Run Mode
12:06 - Step 12: Test the Connection
13:00 - Troubleshooting
14:17 - What You Learned
๐ WHAT YOU'LL LEARN
โ How to control the ACC 3D scene with real ladder logic and no hardware
โ Install Node.js and run the ACC Modbus Bridge that links the scene to the PLC
โ Connect the browser-based 3D scene to the bridge
โ Configure a Modbus TCP client device and I/O scanner in Do-More Designer
โ Write ladder logic on the built-in simulator and test it against the 3D scene
โ FREQUENTLY ASKED
Q: Can I control a 3D PLC scene without any hardware?
A: Yes โ the ACC 3D scene connects to the Do-More Designer simulator over Modbus TCP through the ACC Modbus Bridge, so you write and run real ladder logic on one PC with no PLC. The full setup is in the guide.
Q: What is the ACC Modbus Bridge?
A: It's a small helper program (running on Node.js) that passes I/O between the browser-based 3D scene and the Do-More simulator over Modbus TCP, so the two can talk on a single PC.
Q: Do I write real PLC code, or is it simplified?
A: Real code โ you write actual BRX Do-More ladder logic in Do-More Designer and run it on the built-in simulator; the 3D scene is just the machine it controls.
๐ Full step-by-step & downloads: accautomation.ca/control-3d-plc-scenes-with-zero-hardware-heres-how
๐ MORE RESOURCES
โถ Free ACC PLC Simulator: accautomation.ca/simulator
โถ BRX Do-More PLC Series: accautomation.ca/series/brx-do-more-plc
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #BRXPLC #DoMore #ModbusTCP #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca










