Run, Stop and Zoom the PLC Simulator โ€” All From a Gamepad! @ACCautomation
Run, Stop and Zoom the PLC Simulator โ€” All From a Gamepad!  @ACCautomation
Uploaded October 2026 | Updated November 2026, 1 day ago
Gamepad system controls for the PLC simulator: press Start to run, Select to stop, click the left stick to single-step one scan, push the right stick Y axis to zoom, click it to reset zoom. Free ACC PLC Simulator.

โšก QUICK ANSWER
Gamepad system controls let you operate the ACC PLC Simulator itself, hands-free, without touching the mouse or keyboard. Press Start, called Options on some controllers, to put the simulator in run mode, and press Select, called Share on some controllers, to stop it. Click the left stick to execute a single step, which runs one PLC scan at a time, so you can watch your logic evaluate rung by rung and follow exactly how the scan cycle works. The right stick handles the view: pushing its Y axis zooms the 3D view in and out, and clicking the right stick resets the zoom back to 100 percent. This is the third layer of gamepad control in the simulator. The face buttons give you momentary digital inputs, the sticks and triggers give you analog inputs, and these system controls run the simulator around them, so a single controller both feeds your program and operates the simulation. It is a genuinely hands-free way to program, run, and step through your logic. The simulator is free and the link is below.

๐ŸŽฎ THE SYSTEM CONTROLS
โ–ถ Start (or Options) โ†’ put the simulator in RUN mode
โ–ถ Select (or Share) โ†’ STOP it
โ–ถ Click the LEFT stick โ†’ execute a SINGLE STEP (one PLC scan)
โ–ถ Right stick Y axis โ†’ ZOOM the view in and out
โ–ถ Click the RIGHT stick โ†’ reset the zoom to 100%

๐Ÿ” WHY SINGLE-STEP IS USEFUL
โ–ถ Runs one PLC scan at a time
โ–ถ Watch your logic evaluate rung by rung
โ–ถ A great way to understand the scan cycle and debug your program

๐Ÿ“– FULL STEP-BY-STEP + DOWNLOADS (mapping tables, 3D scene notes, coding samples)
accautomation.ca/acc-plc-simulator-and-3d-scenes-control-plc-with-gamepad

๐Ÿ•น๏ธ TRY IT FREE โ€” THE ACC PLC SIMULATOR
accautomation.ca/simulator

๐Ÿ“š WHAT YOU'LL LEARN
โœ… How to run and stop the simulator from the gamepad
โœ… How to single-step one PLC scan at a time
โœ… How to zoom the 3D view and reset it to 100%
โœ… Why single-stepping helps you learn the scan cycle
โœ… How the gamepad both feeds inputs and operates the simulator

โ“ FREQUENTLY ASKED
Q: How do I run and stop the simulator with a gamepad?
A: Press Start (or Options) to put it in run mode, and Select (or Share) to stop it. You can also click the left stick to single-step one scan. Try it free at the link below.

Q: What does clicking the left stick do?
A: It executes a single step โ€” one PLC scan at a time โ€” so you can watch your logic evaluate rung by rung. It's a great way to understand the scan cycle and debug your program.

๐Ÿ‘‰ Try it free: accautomation.ca/simulator

๐Ÿ”— MORE RESOURCES
โ–ถ Gamepad Digital Input Mapping (buttons to X1โ€“X10): youtube.com/shorts/VYun-b24wi0
โ–ถ Gamepad Analog Input Mapping (sticks/triggers to AX1โ€“AX5): youtube.com/shorts/75oFwVCbHdk
โ–ถ Run a Start-Stop-Jog Program With a Gamepad: youtube.com/shorts/nilrOfKYE3k
โ–ถ Plug-and-Play Gamepad Setup: youtube.com/shorts/-8KeagwVZ7Y
โ–ถ Free eBooks: accautomation.ca (subscribe for download)

๐Ÿ’ฌ Questions? Drop a comment below.

๐Ÿ”” New tutorials every Monday โ€” Subscribe and hit the bell!

#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #Gamepad #ScanCycle #HandsFree #Shorts

Regards,
Garry
ACC Automation
accautomation.ca
Run, Stop and Zoom the PLC Simulator โ€” All From a Gamepad!Start-Stop-Jog Circuit in 3Dโ€”Finally Simple! #plc #automation #tutorialAI anticipates my next question! Mind blown!Motor Starter Logic: Build a Fail-Safe System in 5 RungsPut a one shot in!Fan Rundown Delay: Off-Delay Timer in Action! ๐ŸญNew to Relays? Start with the Glossary!AI codes correct fail-safe behavior first try!Everyone Hits the Same Wall Learning PLCs โ€” Heres the FixCTU vs CTD vs CTUD: Which PLC Counter Do You Need?Whats Inside a PLC Relay Trainer?The Easiest Way to Learn PLC Logic Right Now ๐Ÿ› ๏ธ #PLC #Shorts
ACC Automation: PLC & Industrial Control Learning |

Run, Stop and Zoom the PLC Simulator โ€” All From a Gamepad!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER