Uploaded October 2026 | Updated November 2026, 3 hours ago
Master relay terminology fast: pole, throw, Common, NO, NC and the SPST to QPDT contact codes you need to read any relay datasheet or panel print.
⥠QUICK ANSWER
Relay abbreviations describe two things: how many contact groups the relay has (poles) and how many positions each one can switch to (throws). SPST is one pole, one throw; SPDT adds a normally closed contact so a single pole switches between two destinations; DPDT, TPDT and QPDT repeat that group two, three or four times. Inside each group, Common is the moving lever, NO is open until the coil energizes, and NC is closed until it does â and because standard EMRs are Break Before Make, Common always leaves NC before it reaches NO.
đ FULL GLOSSARY + DIAGRAMS (relay cutaway, contact group symbols, test values)
accautomation.ca/relay-symbols-and-abbreviations-glossary
đ WHAT YOU'LL LEARN
â Read pole and throw correctly, so SPST, SPDT, DPST, DPDT, TPDT and QPDT stop being alphabet soup
â Identify Common, NO and NC on a relay base and know which one is live before the coil energizes
â Understand a contact group as a tied assembly â Common plus NC plus NO â and count groups on any relay
â Know what Break Before Make (B-M) means and why it protects the circuit during transfer
â Check relay contacts with an ohmmeter and recognize the resistance values that say the contact is good
â FREQUENTLY ASKED
Q: What is the difference between a pole and a throw on a relay?
A: The pole is the moving element carrying the Common contact â how many independent circuits the relay switches. The throw is how many positions that Common can connect to.
Q: What does SPDT mean on a relay?
A: Single Pole, Double Throw â one contact group with a Common, an NC and an NO contact, so one coil switches a circuit between two destinations.
Q: Does this glossary cover solid-state or safety relays?
A: No. It covers electromechanical relays (EMRs) used with PLCs. Latching, reed, thermal, safety and solid-state relays are deliberately left out to keep the terminology consistent.
đ Full glossary with diagrams and test values: accautomation.ca/relay-symbols-and-abbreviations-glossary
đ MORE RESOURCES
âļ Relay series so far:
âĸ The Relay Obituary? Not So Fast! â accautomation.ca/the-relay-orbituary-not-so-fast
âĸ Relay Symbols and Abbreviations Glossary â accautomation.ca/relay-symbols-and-abbreviations-glossary
âĸ EMR Contacts in Applications â accautomation.ca/emr-contacts-in-applications
âļ Series: accautomation.ca/series
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #Relay #ControlPanel #PLCTutorial #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Master relay terminology fast: pole, throw, Common, NO, NC and the SPST to QPDT contact codes you need to read any relay datasheet or panel print.
⥠QUICK ANSWER
Relay abbreviations describe two things: how many contact groups the relay has (poles) and how many positions each one can switch to (throws). SPST is one pole, one throw; SPDT adds a normally closed contact so a single pole switches between two destinations; DPDT, TPDT and QPDT repeat that group two, three or four times. Inside each group, Common is the moving lever, NO is open until the coil energizes, and NC is closed until it does â and because standard EMRs are Break Before Make, Common always leaves NC before it reaches NO.
đ FULL GLOSSARY + DIAGRAMS (relay cutaway, contact group symbols, test values)
accautomation.ca/relay-symbols-and-abbreviations-glossary
đ WHAT YOU'LL LEARN
â Read pole and throw correctly, so SPST, SPDT, DPST, DPDT, TPDT and QPDT stop being alphabet soup
â Identify Common, NO and NC on a relay base and know which one is live before the coil energizes
â Understand a contact group as a tied assembly â Common plus NC plus NO â and count groups on any relay
â Know what Break Before Make (B-M) means and why it protects the circuit during transfer
â Check relay contacts with an ohmmeter and recognize the resistance values that say the contact is good
â FREQUENTLY ASKED
Q: What is the difference between a pole and a throw on a relay?
A: The pole is the moving element carrying the Common contact â how many independent circuits the relay switches. The throw is how many positions that Common can connect to.
Q: What does SPDT mean on a relay?
A: Single Pole, Double Throw â one contact group with a Common, an NC and an NO contact, so one coil switches a circuit between two destinations.
Q: Does this glossary cover solid-state or safety relays?
A: No. It covers electromechanical relays (EMRs) used with PLCs. Latching, reed, thermal, safety and solid-state relays are deliberately left out to keep the terminology consistent.
đ Full glossary with diagrams and test values: accautomation.ca/relay-symbols-and-abbreviations-glossary
đ MORE RESOURCES
âļ Relay series so far:
âĸ The Relay Obituary? Not So Fast! â accautomation.ca/the-relay-orbituary-not-so-fast
âĸ Relay Symbols and Abbreviations Glossary â accautomation.ca/relay-symbols-and-abbreviations-glossary
âĸ EMR Contacts in Applications â accautomation.ca/emr-contacts-in-applications
âļ Series: accautomation.ca/series
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #Relay #ControlPanel #PLCTutorial #Shorts
Regards,
Garry
ACC Automation
accautomation.ca










