Start-Stop-Jog Circuit in 3D—Finally Simple! #plc #automation #tutorial @ACCautomation
Start-Stop-Jog Circuit in 3D—Finally Simple! #plc #automation #tutorial  @ACCautomation
Uploaded June 2026 | Updated November 2026, 3 hours ago
Build start-stop-jog motor control and watch it run in 3D — start latches the motor, stop drops it, jog runs only while held. Free in the ACC PLC Simulator. Here's how.

⚡ QUICK ANSWER
Start-stop-jog is the classic motor-control circuit with one extra function. Start and stop work as a seal-in: press start and the motor latches on (sealed in), press stop and it drops. Jog adds a run-only-while-held mode: pressing jog runs the motor for as long as you hold the button and stops the instant you release it, without sealing in — useful for inching a machine into position. The key is that the jog path bypasses the seal-in, so it doesn't latch. In the ACC PLC Simulator you build this logic and run it against a 3D Control Panel scene, so you can see start latch the output, stop drop it, and jog pulse it live — all in your browser, no hardware. The full walkthrough is in the guide below.

🎮 SEE IT LIVE — THE ACC PLC SIMULATOR (free 3D scenes, right in your browser)
accautomation.ca/simulator

📖 FULL WRITTEN TUTORIAL + DOWNLOADS (Control Panel scene)
accautomation.ca/how-to-use-the-acc-plc-simulator-control-panel-scene-tutorial

📚 WHAT YOU'LL LEARN
✅ How start and stop form a seal-in that latches the motor on and off
✅ How jog runs the motor only while the button is held
✅ Why the jog path bypasses the seal-in so it doesn't latch
✅ How to build it and watch it run against a 3D scene — no hardware

❓ FREQUENTLY ASKED
Q: What is start-stop-jog control?
A: It's a motor circuit where start latches the motor on (seal-in), stop drops it, and jog runs the motor only while the jog button is held — without latching. The full walkthrough is in the guide.

Q: How is jog different from start?
A: Start seals the motor in so it stays running after you release the button; jog runs the motor only while you hold it and stops the moment you let go — useful for inching a machine into position.

👉 See it live in the simulator: accautomation.ca/simulator

🔗 MORE RESOURCES
▶ Free ACC PLC Simulator: accautomation.ca/simulator
▶ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
▶ Free eBooks: accautomation.ca (subscribe for download)

🛒 RECOMMENDED HARDWARE
▶ Shop: automationdirect.com
▶ Parts Guide: accautomation.ca/purchase-find-parts

💬 Questions? Drop a comment below.

🔔 New tutorials every Monday — Subscribe and hit the bell!

#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #StartStopJog #MotorControl #Jog #Shorts

Regards,
Garry
ACC Automation
accautomation.ca
Start-Stop-Jog Circuit in 3D—Finally Simple! #plc #automation #tutorialAI anticipates my next question! Mind blown!Motor Starter Logic: Build a Fail-Safe System in 5 RungsPut a one shot in!Fan Rundown Delay: Off-Delay Timer in Action! 🏭New to Relays? Start with the Glossary!AI codes correct fail-safe behavior first try!Everyone Hits the Same Wall Learning PLCs — Heres the FixCTU vs CTD vs CTUD: Which PLC Counter Do You Need?Whats Inside a PLC Relay Trainer?The Easiest Way to Learn PLC Logic Right Now 🛠️ #PLC #ShortsNO Contact in PLCs Essential Motor Control!
ACC Automation: PLC & Industrial Control Learning |

Start-Stop-Jog Circuit in 3D—Finally Simple! #plc #automation #tutorial

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER