Uploaded June 2026 | Updated November 2026, 3 hours ago
Learn to add a fan rundown delay on the P1-M622 Mini PLC with an off-delay timer that keeps the motor running 10 seconds after stop for cooling.
⥠QUICK ANSWER
A fan rundown delay keeps a motor running for a set time after the operator presses stop â here, 10 seconds so the fan can cool before fully stopping. On the P1-M622 Mini PLC you do this with an off-delay timer: pressing stop starts the timer, the motor output stays energized until it times out, then the output drops.
đ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca
đ WHAT YOU'LL LEARN
â Understand when an off-delay (rundown) timer is the right tool
â Keep a fan or motor running for a set time after stop is pressed
â Use a 10-second rundown delay to allow cooling before full stop
â Apply the off-delay pattern to real motor and fan control circuits
â FREQUENTLY ASKED
Q: What's an off-delay timer?
A: It delays turning OFF â once its input goes false, the output stays on for the preset time before dropping out. That's what keeps the fan running after stop.
Q: Why add a rundown delay to a fan?
A: It lets the motor or fan cool and clear residual heat before fully stopping, a common requirement on real industrial equipment.
đ Full step-by-step, code & wiring diagrams: accautomation.ca
đ MORE RESOURCES
âļ Series: accautomation.ca/series/productivity-1000-plc
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #AutomationDirect #PLCTimer #MotorControl #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca
Learn to add a fan rundown delay on the P1-M622 Mini PLC with an off-delay timer that keeps the motor running 10 seconds after stop for cooling.
⥠QUICK ANSWER
A fan rundown delay keeps a motor running for a set time after the operator presses stop â here, 10 seconds so the fan can cool before fully stopping. On the P1-M622 Mini PLC you do this with an off-delay timer: pressing stop starts the timer, the motor output stays energized until it times out, then the output drops.
đ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca
đ WHAT YOU'LL LEARN
â Understand when an off-delay (rundown) timer is the right tool
â Keep a fan or motor running for a set time after stop is pressed
â Use a 10-second rundown delay to allow cooling before full stop
â Apply the off-delay pattern to real motor and fan control circuits
â FREQUENTLY ASKED
Q: What's an off-delay timer?
A: It delays turning OFF â once its input goes false, the output stays on for the preset time before dropping out. That's what keeps the fan running after stop.
Q: Why add a rundown delay to a fan?
A: It lets the motor or fan cool and clear residual heat before fully stopping, a common requirement on real industrial equipment.
đ Full step-by-step, code & wiring diagrams: accautomation.ca
đ MORE RESOURCES
âļ Series: accautomation.ca/series/productivity-1000-plc
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #AutomationDirect #PLCTimer #MotorControl #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca










