AI anticipates my next question! Mind blown! @ACCautomation
AI anticipates my next question! Mind blown!  @ACCautomation
Uploaded November 2026 | Updated November 2026, 1 day ago
PLC one shot logic in Structured Text. A held start button restarts the conveyor cycle forever unless the start pulse fires one scan on a rising edge.

โšก QUICK ANSWER
PLC start logic needs a one shot because an operator holding the button down is indistinguishable from a fresh start command. The AI built one from two variables: a start pulse that goes TRUE for exactly one scan when X1 transitions from false to true, and nothing more. Without it, a held start button would immediately relaunch the cycle the instant the box reached the left sensor and the state machine returned to Idle, so the conveyor would never stop. The AI added that protection unprompted, which was the genuine surprise of the test. The variable names, the code and the stop priority block are in the written test.

๐Ÿ“– FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca/can-ai-program-a-plc-i-tested-it-live-in-the-acc-plc-simulator

๐Ÿ“š WHAT YOU'LL LEARN
โœ… Build a one shot that fires for exactly one scan on a false to true transition
โœ… Spot the held button fault where a cycle restarts the moment it finishes
โœ… Use two variables to turn a maintained input into a single edge event
โœ… Separate the operator pressing start from the program being allowed to start
โœ… Recognise which edge cases an AI handles unprompted and which it leaves to you

โ“ FREQUENTLY ASKED
Q: What breaks if a start button has no one shot?
A: The input stays TRUE while it is held. As soon as the cycle completes and the state returns to Idle, that still TRUE input starts the cycle again, so the conveyor loops indefinitely.

Q: Why does a one shot need two variables?
A: One holds the current state of the input and one remembers the previous scan. Comparing them is what identifies the single scan where the transition happened.

Q: Which AI was used for this program?
A: Claude. It was given the conveyor specification in full and asked to return the Structured Text program.
๐Ÿ‘‰ Full step-by-step, code and wiring diagrams: accautomation.ca/can-ai-program-a-plc-i-tested-it-live-in-the-acc-plc-simulator

๐Ÿ”— MORE RESOURCES
โ–ถ Series: accautomation.ca/series
โ–ถ Free PLC Simulator: accautomation.ca/simulator
โ–ถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โ–ถ Free eBooks: accautomation.ca (subscribe for download)

๐Ÿ›’ RECOMMENDED HARDWARE
โ–ถ Shop: automationdirect.com
โ–ถ Parts Guide: accautomation.ca/purchase-find-parts

๐Ÿ’ฌ Questions? Drop a comment below.

๐Ÿ”” New tutorials every Monday โ€” Subscribe and hit the bell!

#PLC #StructuredText #IndustrialAutomation #PLCProgramming #ACCAutomation #AI #PLCTutorial #LearnPLC #Shorts

Regards,
Garry
ACC Automation
accautomation.ca
AI anticipates my next question! Mind blown!Motor Starter Logic: Build a Fail-Safe System in 5 RungsPut a one shot in!Fan Rundown Delay: Off-Delay Timer in Action! ๐ŸญNew to Relays? Start with the Glossary!AI codes correct fail-safe behavior first try!Everyone Hits the Same Wall Learning PLCs โ€” Heres the FixCTU vs CTD vs CTUD: Which PLC Counter Do You Need?Whats Inside a PLC Relay Trainer?The Easiest Way to Learn PLC Logic Right Now ๐Ÿ› ๏ธ #PLC #ShortsNO Contact in PLCs Essential Motor Control!Your drives are useless without this #industrial #maintenance
ACC Automation: PLC & Industrial Control Learning |

AI anticipates my next question! Mind blown!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER