Woodturning a Christmas Decoration - Turners Warehouse Ornament Challenge @jpwoodwork
Woodturning a Christmas Decoration - Turners Warehouse Ornament Challenge  @jpwoodwork
Uploaded September 2025 | Updated November 2026, 1 day ago
Today I’m woodturning a stunning Christmas ornament from maple burl! The bulb is stained a festive red, while the finials are left natural for a classic contrast. I turned this piece on my Harvey T60S lathe using Easy Wood Tools carbide cutters, then brought it to a smooth, glossy finish with Yorkshire Grit Microfine and Hampshire Sheen Burnishing Oil.

For a little extra magic, I added opals from Easy Inlay and finished it off with a red ribbon so it’s ready to hang on the tree.

This piece is my entry for the Turners Warehouse Ornament Challenge — a fantastic event where woodturners from all over make ornaments that are auctioned off, with 100% of profits going to St. Jude Children’s Research Hospital.

📅 Entry Deadline: November 14, 2025
💝 All proceeds support St. Jude’s mission!

If you’d like to join the challenge or learn more, check the links in the description below along with links to all the tools and products I used in this project.

2025 Ornament Auction Launch Video: youtube.com/watch?v=AHOVxZUV8SI

👍 Don’t forget to like, comment, and subscribe to follow along with more woodturning projects and support a great cause!

Turners Warehouse Affiliate Link: turnerswarehouse.com/?ref=tkufrmqm

Carbide Cutters: turnerswarehouse.com/products/easy-wood-tools-carbide-cutters?_pos=2&_sid=dbbe6d850&_ss=r&ref=tkufrmqm
Mid Size Tools: turnerswarehouse.com/products/mid-size-easy-tools-ewt-easy-wood-tools?_pos=4&_sid=dbbe6d850&_ss=r&ref=tkufrmqm&variant=13527873093715
Mid Size Hollowers: turnerswarehouse.com/products/mid-size-easy-hollower-ewt?_pos=13&_sid=dbbe6d850&_ss=r&ref=tkufrmqm
Parting Tool: turnerswarehouse.com/products/easy-parting-tool-ewt-easy-wood-tools?_pos=8&_sid=dbbe6d850&_ss=r&ref=tkufrmqm
Yorkshire Grit: turnerswarehouse.com/products/yorkshire-grit?_pos=7&_sid=dbbe6d850&_ss=r&ref=tkufrmqm
Easy Wood Chuck: turnerswarehouse.com/products/easy-chuck?_pos=12&_sid=dbbe6d850&_ss=r&ref=tkufrmqm
Mini Hollowers: turnerswarehouse.com/products/mini-easy-hollowers-ewt?ref=tkufrmqm&variant=29510351159379
Easy Live Centre/Cone Centre: turnerswarehouse.com/products/easy-cone-set-live-center-ewt?_pos=9&_sid=dbbe6d850&_ss=r&ref=tkufrmqm

Saturday Morning Cartoons: @JakeThompson

Harvey Tools UK Distributor - charnwood.net

Patreon: patreon.com/jpwoodwork

dremel.com/gb/en

o3 Adhesives: o3adhesives.co.uk/?sca_ref=5224992.NTDTbAOXY7

Klingspor Abrasives UK..... skkrafts.uk.

Resin Molds/Resin Blanks: jakeblanks.com

GET 10% OFF SHADOW FOAM INSERTS USING CODE 'JPWOODWORK' AT CHECKOUT........ bit.ly/4aFxw6D

Huge thanks to the supporters of my Channel:
Easy Wood Tools, DREMEL, Niles Bottle Stoppers and Harvey Industries Intl Shadow Foam

Easy Wood Tools Chuck Template on Amazon: amazon.co.uk/dp/B08DTVW18K?ref=myi_title_dp&fbclid=IwAR3ZxMatZZfIJVAPOFtpxL2wzmE2x4bWD_F-NJspcUea46etWIslLVax9Hc

Email : jpwoodwork@hotmail.com
Facebook Page: facebook.com/jpwdwork
Twitter : twitter.com/jp_woodwork
Instagram : instagram.com/jp_woodwork

Timestamps:
00:00 - Intro
00:03 - Drilling into the Bulb
00:36 - Turning the bulb round
01:02 - Mark out Halfway
01:20 - Turn the first half of the bulb to shape
02:45 - Turning the other half of the bulb
04:01 - Sanding
04:25 - Clean the grain
04:33 - Adding red stain
05:06 - Sand it back
05:28 - Clean the grain
05:51 - Adding a darker red
06:20 - Sanding that back
06:45 - Clean the grain
07:12 - Sanding sealer
07:23 - Yorkshire Grit Microfine
07:56 - Hampshire Sheen Burnishing Oil
08:42 - Hollowing the bulb
09:50 - Turning the finials to round
10:17 - Flatten the end off
10:40 - Make a tenon
10:53 - Part off the bottom segment
11:09 - Flatten off
11:22 - Mark out the diameter for the tenon
11:48 - Test fit
12:09 - Part off the top finial segment
12:24 - Shape the top finial
13:07 - Shaping the bottom Finial
14:08 - Sanding
14:27 - Clean the grain
14:39 - Sanding sealer
14:46 - Yorkshire Grit
15:11 - Hampshire Sheen Burnishing Oil
15:47 - Adding UV Resin
15:57 - Adding Opals
16:16 - Outro
Woodturning a Christmas Decoration - Turners Warehouse Ornament ChallengeHow to Make a Winged Bowl. Beginner Woodturning ProjectsWoodturning a Honey Pot & Dipper - Beautiful ResultsTurning a Stunning Metallic Leaf Sphere. Gold, Silver & Copper InlayTurning a Beaded Sapele BowlWoodturning Golden Fire - Woodworking MasterpieceTurning a Stem for a Wine Glass. Beginner Woodturning ProjectsUnbelievable Restoration: See What Happens When We Follow Viewers Ideas!Unleashing the Bright Colours of Purpleheart with Carbide Tools!Woodturning - Padauk Sunrise PlatterWoodturning Magic: Beech Wood Bowl with Stunning Pearlescent Paints!How to make a Emerging Vase. Beginner Woodturning Project
jp woodwork |

Woodturning a Christmas Decoration - Turners Warehouse Ornament Challenge

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER