Wide Input Isolated Flyback DC to DC Converter - Part 1 @MyVanitar
Wide Input Isolated Flyback DC to DC Converter - Part 1  @MyVanitar
Uploaded June 2025 | Updated November 2026, 3 days ago
Wide Input Isolated Flyback DC to DC Converter (50V–300V Input, Multi-Output)
======================================
Altium Designer + Altium-365 (Free): altium.com/yt/MyVanitar
======================================
Article: powerelectronicsnews.com/wide-input-isolated-dc-to-dc-converter
======================================
Schematic & PCB: 365.altium.com/files/B3D9CEC0-5149-4A57-BDA6-A128603BD896
======================================
Other Videos: bit.ly/2N9OlPa
======================================
@AtiumOfficial
#altiumstories

This project is a robust and efficient isolated DC-DC converter based on the flyback topology, designed to handle a wide input voltage range from 50V to 300V DC, making it ideal for industrial, automotive, or renewable energy applications where input voltage fluctuations are common.

Key Features:

Input Voltage Range: 50V – 300V DC
Output 1: 5V @ 500mA (isolated)
Output 2: 3.3V @ 500mA (isolated)
Output 3: 15V @ 300mA (independent isolated winding)
Controller IC: OB2273
Topology: Flyback with transformer-based galvanic isolation
Switching Frequency: ~65kHz (typical for OB2273 applications)
Protections: OVP, SCP, UVLO, cycle-by-cycle current limiting
Controller IC – OB2273 Overview

The OB2273 is a highly integrated current-mode PWM controller from On-Bright Electronics, specifically designed for offline isolated Flyback converters. It features:

Integrated high-voltage startup circuit for simplifying design and reducing standby loss.
Internal soft-start, frequency jittering for EMI reduction, and cycle-by-cycle current limiting.
Green mode operation, which reduces switching frequency at light load to improve efficiency and meet Energy Star or DOE Level VI power consumption targets.

Design Considerations
A custom multi-output flyback transformer was designed to deliver tightly regulated 5V and 3.3V outputs with shared ground, and an independently isolated 15V output for control, feedback, or analog circuitry.
Cross-regulation techniques (e.g., dummy loads or active regulation) were used to maintain output stability across varying loads.
Optocoupler feedback was implemented from the 5V rail to regulate the main control loop, with auxiliary windings supporting startup and biasing.
A snubber circuit (RCD or TVS clamp) was used across the transformer primary to handle leakage inductance and improve switching efficiency.

Applications
Industrial sensor and controller nodes
Isolated gate drivers or analog front ends
Battery-powered or solar applications needing galvanic isolation
Microcontroller-based systems with multiple voltage domains

Advantages
Operates reliably across a very wide DC input range, suitable for harsh and variable environments
High efficiency and low standby power consumption due to OB2273’s green-mode control
Full isolation ensures safety and noise immunity between the control and power sections
Compact and cost-effective thanks to single-switch Flyback design
Wide Input Isolated Flyback DC to DC Converter - Part 1An Easy Method to Compile the Raspberry Pi Pico C/C++ Code using VSCode and Pico SDK in Windows 10DIY Automatic Hand Sanitizer/Alcohol Dispenser CircuitLinear Power Supply Circuit [LM317, LM337, Adjustable & Low Noise]20W+ AC LED Light CircuitThermal Master P3 USB-C Camera Review35V-5A Adjustable Switching Power Supply (DC to DC Buck Converter)220V-AC to 12V-DC, 18W Switching Power SupplyIsolated H-Bridge DC Motor Driver Circuit5A Adjustable Digital DC Load Circuit[PCB Update] AC to DC Transformerless Power SupplyGentle Brook Sounds | Relaxing Water Stream Ambience for Calm & Focus
MyVanitar |

Wide Input Isolated Flyback DC to DC Converter - Part 1

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER