Uploaded October 2026 | Updated November 2026, 2 days ago
In this video, I reviewed the thermal master P3 USB-C thermal imaging camera. This camera has two big advantages:
1) Higher IR Resolution (720 * 540)
2) Adjustable Focus
These two make the P3 ideal for electronics work, PCB inspections, and examining the thermal stress of tiny SMD components. P3 may be the only one on the market.
There is an offer: A 10% time-limited discount.
To use this discount offer, you have two options:
1) Use the "discount code": I mentioned it in the video
2) Follow this link: thermalmaster.com/MYVANITAR
In this video, I reviewed the thermal master P3 USB-C thermal imaging camera. This camera has two big advantages:
1) Higher IR Resolution (720 * 540)
2) Adjustable Focus
These two make the P3 ideal for electronics work, PCB inspections, and examining the thermal stress of tiny SMD components. P3 may be the only one on the market.
There is an offer: A 10% time-limited discount.
To use this discount offer, you have two options:
1) Use the "discount code": I mentioned it in the video
2) Follow this link: thermalmaster.com/MYVANITAR




![[PCB Update] AC to DC Transformerless Power Supply
AC to DC Transformerless Power Supply, PCB Update
Ive modified the wrong clearance for two capacitor pins
Altium-365 Workspace (Free): https://www.altium365.com/yt/myvanitar
PCB Fabrication (1$ for 10Pcs): https://www.pcbx.com/?mtm_campaign=AD&mtm_kwd=MyV&mtm_source=YT
Schematic/PCB/Gerber: https://365.altium.com/files/75F890FD-DD2D-415E-A9E6-1F7CB2435219
Other Videos: http://bit.ly/2N9OlPa
Whenever you hear the transformerless (AC to DC converter without transformer) supply term, you initially imagine the capacitor-based solution: a high-voltage non-polarized capacitor in series with the mains line, a bridge rectifier, a Zener diode, and a filtering electrolytic capacitor. Such a circuit is not only unable to deliver sufficient current for many applications, it is also not a reliable solution for the industry. However, you might see such circuits in some cheap products.
The AL17150-10B is a universal high-voltage input step-down regulator product family, which provides accurate Constant Voltage (CV) and outstanding dynamic performance without requiring an optocoupler over line and load regulation. Typical applications are offline low power applications including connected LED lighting power supply for microcontrollers and other IoT applications. The AL17150-10B integrates a 500V/1A MOSFET that can make it use fewer external components and create a low Bill Of Material (BOM) cost solution. The AL17150-10B can provide up to 300mA output current and lower than 50mW standby power, which is very suitable for IoT-connected lighting devices. The AL17150-10B achieves excellent regulation and high power efficiency. The characteristics of max peak current and driving frequency vary as the load changes, which can get excellent efficiency performance at light load and improve the overall average efficiency. The AL17150-10B has rich protection features to enhance the system safety and reliability. It has Over Temperature Protection, VCC Under Voltage Lock function, Output Short Protection, Over-Load Protection, and Open Loop Protection (220v AC to 12v DC converter without transformer).
The AL17150-10B is available in the SO-7 package. [PCB Update] AC to DC Transformerless Power Supply](https://i.ytimg.com/vi/StoZTyxJi3g/mqdefault.jpg)


![Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]
Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope
In the second part of the active low pass filter analysis videos, I used the bode plot to analyze the low pass active filters behavior in practice. There are not many devices that can calculate and demonstrate the bode plot. I used Siglent SDS2102X Plus oscilloscope to plot the bode curve. The cut-off frequency of the filter, in theory, is around 722Hz, however, in practice, the result would be different. The cut-off frequency of a filter is where the X-Axis (frequency) meets the Y-Axis (amplitude) at the -3dB point. The Siglent SDS2000x plus series oscilloscopes offer tons of features for bode plot analysis in practice.
Check other videos: http://bit.ly/2N9OlPa
Tools
Siglent SDS2102X Plus: https://www.siglenteu.com/digital-oscilloscopes/sds2000xp
Inspired by:
ALL ABOUT ELECTRONICS
Active Low Pass Filter and Active High Pass Filter Explained
URL: https://www.youtube.com/watch?v=gEeF8sEQTEc
Inspired by:
The Organic Chemistry Tutor
Low Pass Filters and High Pass Filters - RC and RL Circuits
URL: https://www.youtube.com/watch?v=lagfhNjMuQM
Inspired by:
RC Low Pass Filter, Single Pole, Magnitude, Phase and 3dB Frequency
eeKnowHow
URL: https://www.youtube.com/watch?v=jNZa_G5R85U
Inspired By:
EEVblog 396 - Bode Plotting on Your Osciloscope
EEVBlog
URL: https://www.youtube.com/watch?v=uMH2hGvqhlE
#bode_plot
#frequency_response
#filter Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]](https://i.ytimg.com/vi/UY8NIkUCe0E/mqdefault.jpg)


