220V-AC to 12V-DC, 18W Switching Power Supply @MyVanitar
220V-AC to 12V-DC, 18W Switching Power Supply  @MyVanitar
Uploaded November 2022 | Updated November 2026, 5 days ago
220V-AC to 12V-DC, 18W Switching Power Supply
======================================
Altium Designer + License (Free): altium.com/yt/myvanitar
OctoPart: octopart.com
======================================
Article: pcbway.com/blog/technology/220V_AC_to_12V_DC_18W_Switching_Power_Supply_81665a6c.html
Direct: pcbway.com/project/shareproject/220V_AC_to_12V_DC_18W_Switching_Power_Supply_d406ac5a.html
======================================
Other Videos: bit.ly/2N9OlPa
======================================
Flyback is the most common circuit topology to build galvanically isolated AC to DC or DC to DC converters. Flyback circuit is cheap and relatively easy to manufacture, therefore nowadays the majority of home or industrial appliances are powered using AC to DC Flyback converters. In general, a Flyback converter is suitable for low-power applications, mostly below 100W.
In this article/video, I designed a cheap AC-to-DC flyback converter using a DK124 IC that can deliver up to 18W continuously. I calculated the transformer to handle 12V at the output which can be easily modified to reach other output voltages as well. The DK124 chip does not need any auxiliary winding or even an external startup resistor. The 220V Mains input has been protected using a MOV, an NTC, and a Fuse. The PCB board is single-layer and all components are through-hole.
To design the schematic and PCB, I used Altium Designer 22. The fast component search engine (octopart) allowed me to quickly consider components’ information and also generate the BOM. To get high-quality fabricated boards, I sent the Gerber files to PCBWay. To test the power supply, I used Siglent an SDL1020X-E DC Load, an SDM3045X Multimeter, and an SDS1104X-E/SDS2102X Plus oscilloscope.

Specifications
Input Voltage Range: 85 to 265V-AC
Output Power: 18W Continuous
Output Voltage: 12VDC
Switching Frequency: 65KHz
220V-AC to 12V-DC, 18W Switching Power SupplyIsolated H-Bridge DC Motor Driver Circuit5A Adjustable Digital DC Load Circuit[PCB Update] AC to DC Transformerless Power SupplyGentle Brook Sounds | Relaxing Water Stream Ambience for Calm & Focus6W Transformerless AC-to-DC Power Supply Using MP175 | Full Design, PCB Layout, and Load TestingActive Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]DC to DC Boost (Step up) Converter Circuit using UC384330V-3A Efficient Adjustable Power Supply (Minor Upgrade)Dual-FAN PWM Cooling Circuit with a 6W Isolated Flyback Power SupplyDIY AC-to-DC 12V Flyback SMPS For BeginnersUltrasonic Range Finder Circuit Using an SRF05 and an ATTiny85
MyVanitar |

220V-AC to 12V-DC, 18W Switching Power Supply

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER