Ultrasonic Range Finder Circuit Using an SRF05 and an ATTiny85 @MyVanitar
Ultrasonic Range Finder Circuit Using an SRF05 and an ATTiny85  @MyVanitar
Uploaded March 2022 | Updated November 2026, 4 days ago
Ultrasonic Range Finder Circuit Using SRF05 and ATTiny85
======================================
Altium Designer + License (Free): altium.com/yt/myvanitar
======================================
Article: pcbway.com/blog/technology/An_Ultrasonic_Range_Finder_Using_an_SRF05_and_an_ATTiny85_cff7c5cf.html
pcbway.com/project/shareproject/An_Ultrasonic_Range_Finder_Using_an_SRF05_and_an_ATTiny85_9a5c6404.html
======================================
An ultrasonic range finder is a useful tool in a variety of real-life and robotic applications, such as in obstacle avoidance and distance measurement systems. The ultrasonic range finder measures the distance by emitting a 40KHz pulse of ultrasonic sound that travels through the air until it hits an object, then it measures the delay of the reflected signal and sends proper commands to other units.
I used an SRF05 ultrasonic sensor and an ATTiny85 microcontroller. The distance data is displayed on a 128*64 OLED screen, both in centimeters and inches. Also, a horizontal bar graph provides a visual estimation of the distance. The MCU code was developed using the Arduino IDE.
To design the schematic and PCB, I used Altium Designer 22 and SamacSys component libraries (Altium plugin). To get high-quality PCB boards, I sent the Gerbers to PCBWay and purchased original components using componentsearchengine.com. To examine the current consumption of the circuit, I used the Siglent SDM3045X multimeter.
Isn’t cool?! So let’s get started.
Related Videos
How to Set Up an Ultrasonic Range Finder on an Arduino
youtube.com/watch?v=Ea4CGAw6b_M
Ultrasonic Sensor HC-SR04 and Arduino Tutorial
youtube.com/watch?v=ZejQOX69K5M
Ultrasonic Range Finder Circuit Using an SRF05 and an ATTiny85How to Easily Detect a Failed CapacitorCOMMAX Intercom Board Repair [Not Opening the Door]Easy USB Type-C Lithium Battery Charger + ProtectionEasy SMD Board Design Using Altium Designer [555 LED Flasher]Claude Fable 5.2: Schematic, PCB, Enclosure Design! (Im Skeptical 🤔)Digital AC Dimmer Circuit Using STM32 and Power TRIACUSB-C 2A Switching Lithium Battery ChargerImproved USB-C Digispark Arduino BoardTrue RMS AC Voltage Meter Circuit (10V to 250V)Temperature, Air Pressure, and Altitude on a GUI using Raspberry Pi Pico, Bosch BMP280, and LVGL30A AC Soft Starter (Inrush Current Limiter) Circuit with Fail-Safe
MyVanitar |

Ultrasonic Range Finder Circuit Using an SRF05 and an ATTiny85

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER