Uploaded May 2024 | Updated November 2026, 2 days ago
5A Digital Adjustable DC Load Circuit
======================================
Article: powerelectronicsnews.com/5a-adjustable-digital-dc-load
======================================
Altium Designer + Legal License (Free): altium.com/yt/myvanitar
======================================
Altium 365: altium.com/altium-365
======================================
OctoPart: octopart.com
======================================
Other Videos: bit.ly/2N9OlPa
======================================
A DC load is an essential testing tool for any electronic enthusiast, especially for testing and repairing power supplies. An adjustable DC load can limit the current at any desired level, which makes it suitable to perform various tests because some problems of the feedback loop are only detectable by variable load tests. Also for any SMPS repair attempt, the output should be tested against some loads, not just voltage stability, because the problem might lie within the current sensing on the primary side (a common problem of Flyback SMPSs).
This article introduces a digital DC load with a 1.54-inch OLED display to read the load's voltage, current, and power simultaneously. An accurate Texas Instrument zero-drift INA219 current sensing chip reads the voltage and current values and sends the data through an I2C bus to the ATMega328 microcontroller. The microcontroller makes the calculations and displays the values on an SSD1309 128*64 1.54-inch OLED display. The interface between the MCU and display is HW SPI. A zero-drift rail-to-rail input-output Opamp such as the GS8552-SR and some passive components enhance the stability of the CC circuit. The reference voltage of the Opamp has been stabilized using a TL431 shunt regulator.
The schematic and PCB have been designed using Altium Designer 24 and the Gerber files are provided to download from the Altium-365 cloud space. You can power the board using your mobile phone USB Type-C charger; no external power supply is necessary.
5A Digital Adjustable DC Load Circuit
======================================
Article: powerelectronicsnews.com/5a-adjustable-digital-dc-load
======================================
Altium Designer + Legal License (Free): altium.com/yt/myvanitar
======================================
Altium 365: altium.com/altium-365
======================================
OctoPart: octopart.com
======================================
Other Videos: bit.ly/2N9OlPa
======================================
A DC load is an essential testing tool for any electronic enthusiast, especially for testing and repairing power supplies. An adjustable DC load can limit the current at any desired level, which makes it suitable to perform various tests because some problems of the feedback loop are only detectable by variable load tests. Also for any SMPS repair attempt, the output should be tested against some loads, not just voltage stability, because the problem might lie within the current sensing on the primary side (a common problem of Flyback SMPSs).
This article introduces a digital DC load with a 1.54-inch OLED display to read the load's voltage, current, and power simultaneously. An accurate Texas Instrument zero-drift INA219 current sensing chip reads the voltage and current values and sends the data through an I2C bus to the ATMega328 microcontroller. The microcontroller makes the calculations and displays the values on an SSD1309 128*64 1.54-inch OLED display. The interface between the MCU and display is HW SPI. A zero-drift rail-to-rail input-output Opamp such as the GS8552-SR and some passive components enhance the stability of the CC circuit. The reference voltage of the Opamp has been stabilized using a TL431 shunt regulator.
The schematic and PCB have been designed using Altium Designer 24 and the Gerber files are provided to download from the Altium-365 cloud space. You can power the board using your mobile phone USB Type-C charger; no external power supply is necessary.
![[PCB Update] AC to DC Transformerless Power Supply
AC to DC Transformerless Power Supply, PCB Update
Ive modified the wrong clearance for two capacitor pins
Altium-365 Workspace (Free): https://www.altium365.com/yt/myvanitar
PCB Fabrication (1$ for 10Pcs): https://www.pcbx.com/?mtm_campaign=AD&mtm_kwd=MyV&mtm_source=YT
Schematic/PCB/Gerber: https://365.altium.com/files/75F890FD-DD2D-415E-A9E6-1F7CB2435219
Other Videos: http://bit.ly/2N9OlPa
Whenever you hear the transformerless (AC to DC converter without transformer) supply term, you initially imagine the capacitor-based solution: a high-voltage non-polarized capacitor in series with the mains line, a bridge rectifier, a Zener diode, and a filtering electrolytic capacitor. Such a circuit is not only unable to deliver sufficient current for many applications, it is also not a reliable solution for the industry. However, you might see such circuits in some cheap products.
The AL17150-10B is a universal high-voltage input step-down regulator product family, which provides accurate Constant Voltage (CV) and outstanding dynamic performance without requiring an optocoupler over line and load regulation. Typical applications are offline low power applications including connected LED lighting power supply for microcontrollers and other IoT applications. The AL17150-10B integrates a 500V/1A MOSFET that can make it use fewer external components and create a low Bill Of Material (BOM) cost solution. The AL17150-10B can provide up to 300mA output current and lower than 50mW standby power, which is very suitable for IoT-connected lighting devices. The AL17150-10B achieves excellent regulation and high power efficiency. The characteristics of max peak current and driving frequency vary as the load changes, which can get excellent efficiency performance at light load and improve the overall average efficiency. The AL17150-10B has rich protection features to enhance the system safety and reliability. It has Over Temperature Protection, VCC Under Voltage Lock function, Output Short Protection, Over-Load Protection, and Open Loop Protection (220v AC to 12v DC converter without transformer).
The AL17150-10B is available in the SO-7 package. [PCB Update] AC to DC Transformerless Power Supply](https://i.ytimg.com/vi/StoZTyxJi3g/mqdefault.jpg)


![Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]
Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope
In the second part of the active low pass filter analysis videos, I used the bode plot to analyze the low pass active filters behavior in practice. There are not many devices that can calculate and demonstrate the bode plot. I used Siglent SDS2102X Plus oscilloscope to plot the bode curve. The cut-off frequency of the filter, in theory, is around 722Hz, however, in practice, the result would be different. The cut-off frequency of a filter is where the X-Axis (frequency) meets the Y-Axis (amplitude) at the -3dB point. The Siglent SDS2000x plus series oscilloscopes offer tons of features for bode plot analysis in practice.
Check other videos: http://bit.ly/2N9OlPa
Tools
Siglent SDS2102X Plus: https://www.siglenteu.com/digital-oscilloscopes/sds2000xp
Inspired by:
ALL ABOUT ELECTRONICS
Active Low Pass Filter and Active High Pass Filter Explained
URL: https://www.youtube.com/watch?v=gEeF8sEQTEc
Inspired by:
The Organic Chemistry Tutor
Low Pass Filters and High Pass Filters - RC and RL Circuits
URL: https://www.youtube.com/watch?v=lagfhNjMuQM
Inspired by:
RC Low Pass Filter, Single Pole, Magnitude, Phase and 3dB Frequency
eeKnowHow
URL: https://www.youtube.com/watch?v=jNZa_G5R85U
Inspired By:
EEVblog 396​ - Bode Plotting on Your Osciloscope
EEVBlog
URL: https://www.youtube.com/watch?v=uMH2hGvqhlE
#bode_plot
#frequency_response
#filter Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]](https://i.ytimg.com/vi/UY8NIkUCe0E/mqdefault.jpg)






![COMMAX Intercom Board Repair [Not Opening the Door]
This is the COMMAX Intercom PCB board. A malfunction of this 1206 Fuse caused the device not to open the door. This resettable fuse had not blown up but showed around 16 ohms resistance. It was limiting the current and preventing the door from opening.
Also if the intercom screen freezes, malfunctions, or resets itself, and this is not the power supply issue, you can format its internal flash memory through the device menu and push buttons. COMMAX Intercom Board Repair [Not Opening the Door]](https://i.ytimg.com/vi/XMnbE7OXqBc/mqdefault.jpg)