Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2] @MyVanitar
Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]  @MyVanitar
Uploaded April 2021 | Updated November 2026, 5 days ago
Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope
In the second part of the active low pass filter analysis videos, I used the bode plot to analyze the low pass active filter's behavior in practice. There are not many devices that can calculate and demonstrate the bode plot. I used Siglent SDS2102X Plus oscilloscope to plot the bode curve. The cut-off frequency of the filter, in theory, is around 722Hz, however, in practice, the result would be different. The cut-off frequency of a filter is where the X-Axis (frequency) meets the Y-Axis (amplitude) at the -3dB point. The Siglent SDS2000x plus series oscilloscopes offer tons of features for bode plot analysis in practice.

==========================================
Check other videos: bit.ly/2N9OlPa
==========================================
Tools
Siglent SDS2102X Plus: siglenteu.com/digital-oscilloscopes/sds2000xp
==========================================

Inspired by:
ALL ABOUT ELECTRONICS
Active Low Pass Filter and Active High Pass Filter Explained
URL: youtube.com/watch?v=gEeF8sEQTEc
Inspired by:
The Organic Chemistry Tutor
Low Pass Filters and High Pass Filters - RC and RL Circuits
URL: youtube.com/watch?v=lagfhNjMuQM
Inspired by:
RC Low Pass Filter, Single Pole, Magnitude, Phase and 3dB Frequency
eeKnowHow
URL: youtube.com/watch?v=jNZa_G5R85U
Inspired By:
EEVblog 396​ - Bode Plotting on Your Osciloscope
EEVBlog
URL: youtube.com/watch?v=uMH2hGvqhlE


#bode_plot
#frequency_response
#filter
Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]DC to DC Boost (Step up) Converter Circuit using UC384330V-3A Efficient Adjustable Power Supply (Minor Upgrade)Dual-FAN PWM Cooling Circuit with a 6W Isolated Flyback Power SupplyDIY AC-to-DC 12V Flyback SMPS For BeginnersUltrasonic Range Finder Circuit Using an SRF05 and an ATTiny85How to Easily Detect a Failed CapacitorCOMMAX Intercom Board Repair [Not Opening the Door]Easy USB Type-C Lithium Battery Charger + ProtectionEasy SMD Board Design Using Altium Designer [555 LED Flasher]Claude Fable 5.2: Schematic, PCB, Enclosure Design! (Im Skeptical 🤔)Digital AC Dimmer Circuit Using STM32 and Power TRIAC
MyVanitar |

Active Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER