[PCB Update] AC to DC Transformerless Power Supply @MyVanitar
[PCB Update] AC to DC Transformerless Power Supply  @MyVanitar
Uploaded August 2024 | Updated November 2026, 2 days ago
AC to DC Transformerless Power Supply, PCB Update
I've modified the wrong clearance for two capacitor pins
======================================
Altium-365 Workspace (Free): altium365.com/yt/myvanitar
======================================
PCB Fabrication (1$ for 10Pcs): pcbx.com/?mtm_campaign=AD&mtm_kwd=MyV&mtm_source=YT
======================================
Schematic/PCB/Gerber: 365.altium.com/files/75F890FD-DD2D-415E-A9E6-1F7CB2435219
======================================
Other Videos: bit.ly/2N9OlPa
======================================

Whenever you hear the transformerless (AC to DC converter without transformer) supply term, you initially imagine the capacitor-based solution: a high-voltage non-polarized capacitor in series with the mains line, a bridge rectifier, a Zener diode, and a filtering electrolytic capacitor. Such a circuit is not only unable to deliver sufficient current for many applications, it is also not a reliable solution for the industry. However, you might see such circuits in some cheap products.

The AL17150-10B is a universal high-voltage input step-down regulator product family, which provides accurate Constant Voltage (CV) and outstanding dynamic performance without requiring an optocoupler over line and load regulation. Typical applications are offline low power applications including connected LED lighting power supply for microcontrollers and other IoT applications. The AL17150-10B integrates a 500V/1A MOSFET that can make it use fewer external components and create a low Bill Of Material (BOM) cost solution. The AL17150-10B can provide up to 300mA output current and lower than 50mW standby power, which is very suitable for IoT-connected lighting devices. The AL17150-10B achieves excellent regulation and high power efficiency. The characteristics of max peak current and driving frequency vary as the load changes, which can get excellent efficiency performance at light load and improve the overall average efficiency. The AL17150-10B has rich protection features to enhance the system safety and reliability. It has Over Temperature Protection, VCC Under Voltage Lock function, Output Short Protection, Over-Load Protection, and Open Loop Protection (220v AC to 12v DC converter without transformer).
The AL17150-10B is available in the SO-7 package.
[PCB Update] AC to DC Transformerless Power SupplyGentle Brook Sounds | Relaxing Water Stream Ambience for Calm & Focus6W Transformerless AC-to-DC Power Supply Using MP175 | Full Design, PCB Layout, and Load TestingActive Low Pass Filter Bode Plot Analysis using Siglent SDS2102X Plus Oscilloscope [Part-2]DC to DC Boost (Step up) Converter Circuit using UC384330V-3A Efficient Adjustable Power Supply (Minor Upgrade)Dual-FAN PWM Cooling Circuit with a 6W Isolated Flyback Power SupplyDIY AC-to-DC 12V Flyback SMPS For BeginnersUltrasonic Range Finder Circuit Using an SRF05 and an ATTiny85How to Easily Detect a Failed CapacitorCOMMAX Intercom Board Repair [Not Opening the Door]Easy USB Type-C Lithium Battery Charger + Protection
MyVanitar |

[PCB Update] AC to DC Transformerless Power Supply

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER