Uploaded April 2024 | Updated September 2026, 2 weeks ago
You'll want this upgrade for your Ender 3 V3 KE and SE!
Help support this channel! patreon.com/Needitmakeit
This is the 5th video on this printer, we're nearly there with the upgrades to get this printer printing like a dream, and one thing that's been bothering me is the amount of flex in the posts and vibration I was seeing during printing. There have been a lot of complaints about how square the posts are to the bed, so I thought it was worth a closer look to see if we can fix both problems at once.
The goal was to come up with something that looks good, add the rigidity that we need and also allows some adjustment.
You'll need to use this upgrade as well if you haven't already:
youtu.be/aBBf1eYqPGE
Printed Parts:
makerworld.com/en/models/424874#profileId-328332
Hardware:
M3 x 5mm (10pcs) Heat Set Inserts - Into Arms
M3 x 20mm (10pcs) Button Head MS - Secure Arms to Adapters
M3 x 10mm or 12mm (10pcs) Button Head MS - Outboard Adapter
M5 x 20mm (2pcs) Button Head MS - Inner Arm to Long Arms
M5 Locknut (2pcs) -Inner to Long Arms
You can reuse the stock screws for the motor adapter and lower post adapter
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
QIDI ***Q1 PRO*** qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
BAMBU PRINTERS -shrsl.com/4aghz
CREALITY PRINTERS - shrsl.com/4aghy
#crealityEnder3
#crealityk1
#Ender3
You'll want this upgrade for your Ender 3 V3 KE and SE!
Help support this channel! patreon.com/Needitmakeit
This is the 5th video on this printer, we're nearly there with the upgrades to get this printer printing like a dream, and one thing that's been bothering me is the amount of flex in the posts and vibration I was seeing during printing. There have been a lot of complaints about how square the posts are to the bed, so I thought it was worth a closer look to see if we can fix both problems at once.
The goal was to come up with something that looks good, add the rigidity that we need and also allows some adjustment.
You'll need to use this upgrade as well if you haven't already:
youtu.be/aBBf1eYqPGE
Printed Parts:
makerworld.com/en/models/424874#profileId-328332
Hardware:
M3 x 5mm (10pcs) Heat Set Inserts - Into Arms
M3 x 20mm (10pcs) Button Head MS - Secure Arms to Adapters
M3 x 10mm or 12mm (10pcs) Button Head MS - Outboard Adapter
M5 x 20mm (2pcs) Button Head MS - Inner Arm to Long Arms
M5 Locknut (2pcs) -Inner to Long Arms
You can reuse the stock screws for the motor adapter and lower post adapter
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
QIDI ***Q1 PRO*** qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
BAMBU PRINTERS -shrsl.com/4aghz
CREALITY PRINTERS - shrsl.com/4aghy
#crealityEnder3
#crealityk1
#Ender3
