Uploaded March 2026 | Updated September 2026, 2 weeks ago
A Hot MOPA Fiber Laser combined with a Cold UV laser may just be the ultimate combo
Help support this channel! patreon.com/Needitmakeit
needitmakeit ($200 off)
Lumos Ultra - wecreat.com/products/lumos-ultra-6w-uv-60w-100w-mopa-laser-engraver
A short list to help support this channel, thank you so much for your help!
Bambu H2C - tidd.ly/3K3sSY9 (If you print with color, this is the way)
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
I've been waiting a long time for a machine like this, being able to 3D print parts and then engrave them makes a big difference, it brings the level of a 3D print up so that it looks more like a production part, something professionally made. With crisp engravings and full control of the contrast, I think this last will be very busy for 3D prints alone. The biggest benefit is where the UV laser struggles, the MOPA Fiber laser handles the rest, the combination of these two lasers makes all of the difference in having one machine that can do everything rather than needing to buy two machines, which would cost more and take up more space. The swap is quick, it is just a power off, swap the lens and you're good. Though in a future model I would like to see the threads replaced with something more similar to a camera lens on a DSLR or Mirrorless camera, but it works so I can't complain.
#wecreat
#laser
#3dprinting
A Hot MOPA Fiber Laser combined with a Cold UV laser may just be the ultimate combo
Help support this channel! patreon.com/Needitmakeit
needitmakeit ($200 off)
Lumos Ultra - wecreat.com/products/lumos-ultra-6w-uv-60w-100w-mopa-laser-engraver
A short list to help support this channel, thank you so much for your help!
Bambu H2C - tidd.ly/3K3sSY9 (If you print with color, this is the way)
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe
I've been waiting a long time for a machine like this, being able to 3D print parts and then engrave them makes a big difference, it brings the level of a 3D print up so that it looks more like a production part, something professionally made. With crisp engravings and full control of the contrast, I think this last will be very busy for 3D prints alone. The biggest benefit is where the UV laser struggles, the MOPA Fiber laser handles the rest, the combination of these two lasers makes all of the difference in having one machine that can do everything rather than needing to buy two machines, which would cost more and take up more space. The swap is quick, it is just a power off, swap the lens and you're good. Though in a future model I would like to see the threads replaced with something more similar to a camera lens on a DSLR or Mirrorless camera, but it works so I can't complain.
#wecreat
#laser
#3dprinting
