NeedItMakeIt | Creality Ender 3 V2 - An Even Cleaner Print By Using This Cheat @NeedItMakeIt | Uploaded April 2021 | Updated October 2024, 5 hours ago.
While I'm still in search for the best seam on a bowden setup, I thought I would explore some other ideas. This one I call a cheat because it can't be called a complete success and it can only be used in certain situations. In any case it is a neat method and a fun little test to run. Maybe it could come in handy for some specific prints.
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link: patreon.com/Needitmakeit
In my last video on finishing the cleanest print I received some comments about the seam, and truthfully I have been working on the best settings for this. I've never found great success with seams on this printer, that's partially to do with the larger nozzle I use, and partially because I haven't refined it enough. This video shows a method not normally used for parts like this, I've never really see it used in this way because it probably doesn't work very well. In this print, we've adjusted some settings and changed the setup a little bit to get a close to perfect result... except for one thing.
I am working on a final video for the best seams possible, if you have methods that help you out, please write a comment and I will be sure to try it out.
Most current PLA Profile 0.4 nozzle:
drive.google.com/file/d/1Y6DBhFdZ6BdNJMD_Ff39EO3yZTqTEHRN/view?usp=sharing
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
BAMBU PRINTERS
shrsl.com/4aghz
CREALITY PRINTERS
shrsl.com/4aghy
CREALITY HYPER PLA
shrsl.com/4aghn
#ender3
#3dprinting
#Problemsolving
While I'm still in search for the best seam on a bowden setup, I thought I would explore some other ideas. This one I call a cheat because it can't be called a complete success and it can only be used in certain situations. In any case it is a neat method and a fun little test to run. Maybe it could come in handy for some specific prints.
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link: patreon.com/Needitmakeit
In my last video on finishing the cleanest print I received some comments about the seam, and truthfully I have been working on the best settings for this. I've never found great success with seams on this printer, that's partially to do with the larger nozzle I use, and partially because I haven't refined it enough. This video shows a method not normally used for parts like this, I've never really see it used in this way because it probably doesn't work very well. In this print, we've adjusted some settings and changed the setup a little bit to get a close to perfect result... except for one thing.
I am working on a final video for the best seams possible, if you have methods that help you out, please write a comment and I will be sure to try it out.
Most current PLA Profile 0.4 nozzle:
drive.google.com/file/d/1Y6DBhFdZ6BdNJMD_Ff39EO3yZTqTEHRN/view?usp=sharing
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
BAMBU PRINTERS
shrsl.com/4aghz
CREALITY PRINTERS
shrsl.com/4aghy
CREALITY HYPER PLA
shrsl.com/4aghn
#ender3
#3dprinting
#Problemsolving
