Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter @Radiolink_official
Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter  @Radiolink_official
Uploaded March 2024 | Updated November 2026, 5 days ago
Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter

Hi, today I’m going to introduce Precautions for the first flight of a helicopter.
The debugging of software and hardware is already done in the tutorials before.
Take a computer when you go out to fly it to adjust parameters, and check whether the compass works well because the interference matters a lot for the compass
It is recommended to use a telemetry for parameter adjustment.

There are 2 steps for arming.
1.hold the throttle down and right for more than 4 seconds.
2.After hearing the beeping sound, push the unlock switch, the motor will start rotate.

Besides, you need to know about your flight modes. RadioLink AT9S Pro supports flight modes display on the screen.
Before taking off, please checking the correction direction carefully.
In stabilize mode, hold the helicopter and tilt it to see if the swash-plate moves in the opposite direction.
If any problem, you can check the related tutorials before to solve it.
It is GPS flight mode now.
Experienced pilots can use the stabilize mode to take it off.
Switch to Alt-hold and GPS mode in turn to test it.

Emergency handling: When the compass is interfered, the helicopter will fly in a certain direction. Please switch to Stabilize mode as soon as possible.

This is the video shot with one hand. The helicopter flies smoothly and stably.
Put the transmitter on the ground. Control the helicopter to spin and fly forward and backward with one hand.

It is recommended to install RadioLink CrossFlight on helicopter. That’s all about how to set CrossFlight on Helicopter

For more details of CrossFlight flight controller:
radiolink.com/crossflight

Purchase link of CrossFlight flight controller:
radiolink.com/crossflight_where_to_buy

You can send emails to after_service@radiolink.com.cn if you have any questions when using our products.

#helicopter #pixhawk #radiolink #crossflight
Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of HelicopterHow to Supply Power to the Receiver Without Using the ESC?🎖️I came, I saw, I conquered.#radiolink #rccar #rollershot #carlove #RCHow to test RSSI with T16D transmitter and receivers?Set crossflight/Mini Pix/PIXHAWK on Helicopter / Episode 3 Swashplate SetupHow to Test RSSI with T8FB Transmitter and Receivers?AT10II/AT9S Pro Self Centering Throttle Stick AdjustmentPROG.MIX Function of T8S/T8FB TransmitterThrottle Hold Function of AT9S Pro TransmitterRadioLink New Release RC Airplane D460 Turbot 2024RadioLink New M435 Heavy Lift Drone/ 3KG Payload with 120km/h Flight SpeedBinding and Working Modes of R12DSE
RadioLink |

Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER