Uploaded July 2021 | Updated September 2026, 2 hours ago

---

Hi everyone! Today I’m going to show you how to replace the rear wheel hub & bearing on a Honda S2000.

Follow me on Instagram for more Honda S2000 content: instagram.com/diyguystv

Please consider using the links below to purchase tools in order to support my work.

Tools/Parts necessary:
- 12mm wrench, 17mm wrench
- 10mm, 12mm socket, 14mm socket, 17mm (shallow)
- 3/4 Inch Breaker Bar (amzn.to/3vnnQZ5)
- 36mm socket (3/4 Inch Drive) (amzn.to/3vqGlfe)
- Cotter Pins: amzn.to/3yF3cpm
- 1/2" Torque Wrench: amzn.to/3bOcXJA
- 3/8" Torque Wrench: amzn.to/3htFTsW
- Hydraulic Press: harborfreight.com/20-ton-shop-press-32879.html
- Front Wheel Bearing Replacement Kit: amzn.to/3ivnBoH
- Pliers (For Cotter Pin Removal)
- Ball Joint Separator: amzn.to/3kOqlio
- Spare Hex Nut 12 X 1.25mm (used with ball joint separator)
- Snap Ring Pliers: amzn.to/3wx7cHd
- Hammer & Chisel (to stake the axle nut)

- OEM Wheel Bearing: amzn.to/3yYpnr5
- Rear Wheel Hub: amzn.to/3r8XCsX

Optional:
3/8" Cordless Ratchet: amzn.to/3iw0w50
1/2" Cordless Impact Gun: amzn.to/3mPcNFf