Manganese Chemistry: Mn(V) and Mn(VI) using Formate (?) @colorfulchemistry2569
Manganese Chemistry: Mn(V) and Mn(VI) using Formate (?)  @colorfulchemistry2569
Uploaded September 2016 | Updated November 2026, 18 hours ago
A while ago a friend asked me for a different way to reduce a Palladium complex besides the usual way to take Hydrazine Hydrate. He came up with Formate. And it seems like Formates are mediocre reducing agents as well. So we tried mixing it with Permanganate in an alkaline environment.

First part of the video is the neutralization of dilute formic acid by potassium hydroxide. More Hydroxide is added to make an alkaline environment.

In the second part a few crystals of Permanganate are added. At first it takes a similar color to the Mn(V) we made using Sulfite and cold temperature but then as it is stirred the solution becomes green indicating the formation of Mn(VI). If you compare this to our video on Mn(V) you see how the colors blue and green actually differ which makes the Mn(V) in the other video plausible.

Still for a short moment the blue color was visible. And in comparison to the Mn(V) was this at elevated temperatures and only weak alkaline conditions. So we will try doing it again using a cold and strong alkaline solution and hope to get Mn(V) as well that way.

As formate seems to be a good reducing agent we will try it on other complexes as well in the future, together with more Borohydride and nascent Hydrogen videos.

Note: We tried to find anything about this but had no success. We aren't even sure where the original idea came from.
The Formate should theoretically be oxidized to CO2 in that reaction.

Formic Acid is somewhat special in it's chemistry. Usually Alcohols can be oxidized to Aldehydes and Aldehydes to Carboxylic Acids. Formic Acid is an exception and can be even further oxidized to CO2 which is probably used in this reaction.
On the other hand Formic Acid HCOOH or (H2O)(CO) is, as the second notation tries to emphasize it a bit more the Hydrate of Carbon Monoxide. This is why upon addition of conc. H2SO4 which pulls water really strong CO is formed as toxic gas.

So Formate has actually two possible Systems, a CO and H2O but theoretically also a CO2 and H2 system. There are already ideas to make and store Hydrogen that way using Formate under suitable catalysis. First tests used the expensive Ruthenium but a new paper from 2011 for example tried using Iron compounds as catalysts as well.
Manganese Chemistry: Mn(V) and Mn(VI) using Formate (?)Vanadium Chemistry: Peroxo Vanadium(V) complexNickel Chemistry: Nickel Cyanide and Cyanonickelate(II)Chromium Chemistry: Higher Chromates and IsopolyacidsCobalt Chemistry: Cobalt Thermochromism (2016)Chromium Chemistry: [Cr(OH)6](3-) and Oxidation to ChromateCopper Chemistry: Thiocyanates and RedoxCopper Chemistry: [CuCl4](2-) and equilibrium in waterIron Chemistry: Ligand Substitution (Thiocyanate-Fluoride)Phosphorus Chemistry: Thermally cracking red Phosphorus and white Phosphorus combustion on airBoron Chemistry: Trimethylborate (read explanation)Mercury Chemistry: HgO yellow
Colorful Chemistry |

Manganese Chemistry: Mn(V) and Mn(VI) using Formate (?)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER