Uploaded September 2016 | Updated November 2026, 18 hours ago
Three solutions are prepared. All three flasks contain the same amount of Potassium Dichromate. The left glass is filled with water, the middle one with Nitric Acid (65%) and the right one with Sulfuric Acid (96%).
The one with water turns slightly orange, the next one turns to a darker orange and the last glass turns dark red with a red/purple precipitate after some time.
---------------------------------------------------------------------------------------------------------
There is a famous demonstration called the Chromate-Dichromate-Equilibrium (we will have a video on this, soon). As Acid is added to Chromate (yellow) two Chromates can condense (giving off water) to a Dichromate (orange). If a base is added this goes into the other direction.
Chromate is Cr(VI) surrounded by 4 Oxygen-Ligands (tetrahedrally). As they get protonated by the acid to H2CrO4 two Oxygen in the tetrahedron have now -OH groups. Two of those can give of water (H2O) and form a Cr-O-Cr-Bond. Now this can go into the other direction if the conc. of water is raised.
We call this the principle of Le Chatelier which defines this equilibrium.
If we use a more concentrated acid like HNO3 (65%) we can condense the other side of the already joined tetrahedra as well (remember, since its H2CrO4 each tetraehdron has two OH-Groups where it can condense). So longer chains like Trichromate, Tetrachromate, Pentachromate, which will become more and more red form to long, corner-sharing tetrahedra.
For H2SO4 two effects happen. First this acid has nearly no water in it, second conc. H2SO4 is famous to suck water from every compound, dehydrating Carbohydrates like sugar to carbon, drying compounds in desiccators or destroying your skin in minutes as it pulls out all the water. This gives this reaction a certain boost till a red-purple compound precipitates.
This compound is called Chromium-Trioxide and is a quite famous reagent in organic chemistry. In contrary to many of the other Polychromates it can be easily isolated and stored. Some say that this is a different reaction as H2SO4 would form the Anhydride (CrO3 is the Anhydride of the Chromic Acid) by pulling out the water of a single chromate....this is not really the case. If you look at the crystal structure of CrO3 you will see that it consists of long chains of tetrahedra. So it is still a Polychromate. At some point it wont be soluble in Acid anymore and precipitate. That is what we call CrO3 then.
These acid catalyzed condensations to long chains form a group of compounds called Isopolyacids. Tungstates and Molybdates do this for example as well at higher pH values. The results are the Oxides as well. This is why they won't participate in aqueous chemistry like other d-Metals would do (there are no Mo- or W-cations in water usually, compare this to for example Manganese where we have Mn(II), Mn(IV), Mn(V), ...in solution).
We will hopefully do a video on Niobium, soon. showing that it wont even react with Aqua Regia and no aqueous chemistry using Nb(III) Ions is possible!
Three solutions are prepared. All three flasks contain the same amount of Potassium Dichromate. The left glass is filled with water, the middle one with Nitric Acid (65%) and the right one with Sulfuric Acid (96%).
The one with water turns slightly orange, the next one turns to a darker orange and the last glass turns dark red with a red/purple precipitate after some time.
---------------------------------------------------------------------------------------------------------
There is a famous demonstration called the Chromate-Dichromate-Equilibrium (we will have a video on this, soon). As Acid is added to Chromate (yellow) two Chromates can condense (giving off water) to a Dichromate (orange). If a base is added this goes into the other direction.
Chromate is Cr(VI) surrounded by 4 Oxygen-Ligands (tetrahedrally). As they get protonated by the acid to H2CrO4 two Oxygen in the tetrahedron have now -OH groups. Two of those can give of water (H2O) and form a Cr-O-Cr-Bond. Now this can go into the other direction if the conc. of water is raised.
We call this the principle of Le Chatelier which defines this equilibrium.
If we use a more concentrated acid like HNO3 (65%) we can condense the other side of the already joined tetrahedra as well (remember, since its H2CrO4 each tetraehdron has two OH-Groups where it can condense). So longer chains like Trichromate, Tetrachromate, Pentachromate, which will become more and more red form to long, corner-sharing tetrahedra.
For H2SO4 two effects happen. First this acid has nearly no water in it, second conc. H2SO4 is famous to suck water from every compound, dehydrating Carbohydrates like sugar to carbon, drying compounds in desiccators or destroying your skin in minutes as it pulls out all the water. This gives this reaction a certain boost till a red-purple compound precipitates.
This compound is called Chromium-Trioxide and is a quite famous reagent in organic chemistry. In contrary to many of the other Polychromates it can be easily isolated and stored. Some say that this is a different reaction as H2SO4 would form the Anhydride (CrO3 is the Anhydride of the Chromic Acid) by pulling out the water of a single chromate....this is not really the case. If you look at the crystal structure of CrO3 you will see that it consists of long chains of tetrahedra. So it is still a Polychromate. At some point it wont be soluble in Acid anymore and precipitate. That is what we call CrO3 then.
These acid catalyzed condensations to long chains form a group of compounds called Isopolyacids. Tungstates and Molybdates do this for example as well at higher pH values. The results are the Oxides as well. This is why they won't participate in aqueous chemistry like other d-Metals would do (there are no Mo- or W-cations in water usually, compare this to for example Manganese where we have Mn(II), Mn(IV), Mn(V), ...in solution).
We will hopefully do a video on Niobium, soon. showing that it wont even react with Aqua Regia and no aqueous chemistry using Nb(III) Ions is possible!
 complex forms but is substituted by chloride ligands once the mixture is heated. Then the blue [CoCl4](2-) forms. If the mixture is cooled down it turns pink again.
The reaction towards the chloro-ligand side is endothermic, therefore increasing the temperature will yield in a higher conc. of the blue product. Cobalt Chemistry: Cobalt Thermochromism (2016)](https://i.ytimg.com/vi/OVwtWZy_Lf4/mqdefault.jpg)
 and Oxidation to Chromate
In this video we will show another method to make Chromate(VI) from Chromium(III). Now this will only work if you manage to get Chromium(III) into solution. Some say that the Oxide which is readily available and therefore a cheap and easily accessible source for Chromate will dissolve in strongly alkaline conditions. We never really managed to dissolve it so for Chromium Oxide it might be better to use the other method we showed in a previous video.
Now as Potassium Hydroxide is added to some Chromium(III)Chloride the solution turns dark blue-purple with the formation of Cr(OH)3 or better [Cr(OH)3(H2O)3]. As more Hydroxide is added the three remaining water ligands are exchanged by OH(-) forming the soluble [Cr(OH)6](3-).
Some of this green solution is then transfered to a test tube and Hydrogen Peroxide is added. The mixture is heated and the Peroxide reacts with the Cr(III) forming Cr(VI). To test it we simply added some Sulfuric Acid. Since Hydrogen Peroxide is already present it just needs to be acidified to form the blue CrO5 and indicate the presence of Cr(VI).
Additional information:
Lets take a look at this deprotonation step above. Now we started using CrCl3 in water. This is already hard to describe as Cr(III) is really famous for its isomerism. We will have a video on that as well. It changes color between green/blue and purple quite for many Cr(III) compounds. Although pure [Cr(H2O)6]Cl3 is purple and our solution was dark green which is probably [CrCl2(H2O)4]Cl we will treat it as [Cr(H2O)6](3+) for a moment to make things easier.
Now as one H2O is deprotonated [Cr(OH)(H2O)5](2+) forms. Two of them can form a dimer (much like Fe does)
[(H2O)4Cr-(OH)2-Cr(H2O)4](4+) which has two Cr(III) connected by two OH-bridging ligands. So it is not a (OH)2 group but two separate OH(-), I just wasnt sure how to write this here.
Bigger complexes form as more OH(-) is added like [Cr3(OH)4(H2O)9](5+) for example till Cr(OH)3 or [Cr(OH)3(H2O)3] has formed.
All these multinuclear compounds have the Cr(III) octahedrally coordinated by 6 Oxygen atoms. Now the distance of Cr to Cr is quite big and the Cr(III) repel each other. On one hand this kinda distorts the octahedron, on the other hand is this complex just a bridged one and no cluster compound (so no Cr-Cr bond)!
Cr(OH)3 is amphoteric, so it can react with acids to form [Cr(H2O)6](3+) again or with more base to form the [Cr(OH)6](3-). Chromium Chemistry: [Cr(OH)6](3-) and Oxidation to Chromate](https://i.ytimg.com/vi/Of3HUVUGvYM/mqdefault.jpg)

 and equilibrium in water
If you saw our CuCl video we mentioned there that no major reaction happens if a chloride or bromide is added to Copper Sulfate. Some might have seen a minor color change in between and indeed there is a reaction but we didnt want the Cu(I) video to be too confusing so we assumed there that no reaction takes place. For the reduction it does not matter as long as Cu(I) and Cl(-) ions are present the insoluble Cu(I)-Chloride will precipitate. But what if no reducing agent is added ?
As we add Potassium Chloride to a conc. Copper Sulfate solution it turns green. And this is due to the formation of [CuCl4](2-). If you saw our video on Cobalt chemistry we had a similar case there. It is true that a very strong ligand can substitute a weak one but all of these reactions are equilibria. In some cases one side of the equilibrium is favored so we dont see the back reaction. No in aqueous Chloride solution two complexes might form, [Cu(H2O)4](2+) or [CuCl4](2-).
Note: Yes it is an octahedron around Copper but due to Jahn Teller Distortion two axial H2O are further away and [Cu(H2O)4](2+) does exist as ion as well. We use it to have an easier stoichiometry and 1 Chloride will act on 1 Water that way which makes it easier to see.
So the equilibrium is like:
4 Cl(-) + [Cu(H2O)4](2+) to [CuCl4](2-) + 4 H2O
Now lets assume we are on the right side of the equation. In order to to form the blue aqua complex it will have to react with water. Now lets assume we have an excess of Chloride in there which means there is less water in comparison to complex ion and chloride it cant fully go back and thus the equilibrium shifts towards the Chloro-ligand side. We call this Le Chateliers principle.
Now this compound is not green. In fact it is yellow and the green color comes from mixing with the blue aqua-complex which forms as well. To show this we added some HCl to anhydrous CuSO4 (white) to get a beautiful yellow solution containing the yellow [CuCl4](2-). Copper Chemistry: [CuCl4](2-) and equilibrium in water](https://i.ytimg.com/vi/PqD7NW_-CVE/mqdefault.jpg)
![Iron Chemistry: Ligand Substitution (Thiocyanate-Fluoride)
Iron(III)-Ions (yellow) form the dark red complex Fe(SCN)3 if dropped into a a solution of Ammonium thiocyanate (or any other soluble Thiocyanate salt). This can be used to identify Iron.
Actually this first step is already a ligand substitution from the Hexaqua which is not really present since pure [Fe(H2O)6]3+ which is actually purple is a strong cationic acid comparable to the acid strength of Phosphoric Acid (!) forming in water the famous yellow [Fe(H2O)5(OH)](2+) complex.
If the Hexaqua-complex is assumed in the first step then the red product forming has in solution a composition like
[Fe(SCN)3(H2O)3] .
This compound can be discolored again using Fluoride-Ions. As solid Sodium Fluoride is dropped into the beaker (first floating on top of it) it will discolor everything in its path as it falls towards the bottom forming a colorless
[FeF5(H2O)](2-) complex. Some even say [FeF6](3-) but its probably the first one with another water ligand.
NOTE
The following is a very common explanation on the reaction between Iron-SCN and Fluorides:
An interesting fact is that Cobalt(II)Chloride will form a similar complex with Thiocyanate which is blue. The addition of Fluoride wont discolor it as for example in nature Cobalt-Sulfur-minerals are often found Co-S-Bonds are quite stable, so stable that Fluoride wont displace it. The Fe-S-Bonds are weaker thus forming the colorless Fluoride complex.
Now there is a problem with this statement. And we will cover Thiocyanates in an upcoming video. Many 3d-elements like Fe, Co, ... form Isothiocyanates, not Thiocyanates ! Literature usually does not call them like that but in fact they coordinate via the N-side not the S-Side making them Iso-Thiocyanates. So the red compound formed in this video is actually an Iron-Isothiocyanate.
So the stability of the Co-NCS (Isothiocyanate called NCS now) is higher because of something completely different. I believe it is due to the Hardness of the Iron(III)-cation. Iron(III) has a higher oxidation state and is way smaller than Co(II) making it a harder acid. The HSAB-concept (explained in another video) shows that Hard-Acids and Bases form strong bonds. Fluoride is a really hard Lewis-base so a Fe(III)-F-Bond is stronger than a Co(II)-F bond. That is why the Fe(III)-F-Complex does not appear to be in an equilibrium with the Isothiocyante.
Other arguments use orbital theories to tell whether the S-Side or the N-Side is more likely to form a stronger bond since hardness is somewhat complicated to compare for d-Metals, the d is short for diffuse, so even an Fe(III) is somewhat soft compared to an Al(III).
The last question is, why is the thiocyanate complex that colored and the fluoride one isnt ? Iron(III) has a d5 situation which makes it similar to Mn(II)Chloride which is also colorless in solution.
We have to remind ourselves that these transfers are actual electron movements. We always reduce this to the photon from the light shining on the sample but in fact its a red-ox reaction. The central atom here acts as a Lewis Acid or an electron acceptor, the Ligand needs to possess an electron donor function to carry out a charge transfer transition.
Charge Transfer is nothing limited to colored compounds only. It always happens as soon as you have ligands ! Sometimes the d-d-Transitions are just more intensive or in the visible region and thus stronger than the CT-effects. Still charge transfer happens and becomes important in the second where the d-d-Transition is totally forbidden like spin forbidden.
So for Iron(III)Isothiocyanate and Iron(III)Fluoride the situation is the same. Fe d5 spin forbidden. Color has to come from CT now. But Fluorine is the most electronegative element in the PSE. Of course a fluoride would never donate its electron to the metal making this impossible to happen in a visible region. For Thiocyanate....well SCN doesnt pull electrons the way the halogens do so less energy is required and the stuff absorbs visible light now. Iron Chemistry: Ligand Substitution (Thiocyanate-Fluoride)](https://i.ytimg.com/vi/Q4OfkdyMLRQ/mqdefault.jpg)




 forms when KCN is added to PdI2 and obviously something happened here.
If we ever get some Hg(CN)2 we might try to do it in a different way or even try to make the polymer but by now lets assume it is a cyanide complex of Pd(II). Palladium Chemistry: Tetracyanopalladate(II)](https://i.ytimg.com/vi/SGtimbtRnlQ/mqdefault.jpg)
