Uploaded September 2016 | Updated November 2026, 18 hours ago
Red Phosphorus is heated in a test tube. The phosphorus catches fire and burns with a bright white flame forming thick white clouds.
Red Phosphorus is a so called allotrope of Phosphorus. Like Carbon can occur in Diamond, Graphite, Fullerens, ... Phosphorus has different structures as well.
The easiest would be a P2 with a triple bond analogous to Nitrogen. This exists but is very unstable forming a tetrahedron of 4 Phosphorus atoms, the white Phosphorus. When Phosphorus is freshly made white Phosphorus can be distilled off. Still this form isn't very stable at all and has to be kept in the dark and under inert gas to stay white for a longer period of time. Another way to store it is under water. If Phosphorus gets into contact with air for some time it will spontaneously catch fire.
Phosphorus is what many chemists call oxophile it tries to get Oxygen as fast as possible. This is used in synthetic chemistry as well. One example is the Wittig Reaction. Here the conformation of the molecule is formed by the tendency of a phosphorus to bind to an oxygen in the same molecule which twists the bonds into a fixed position.
The oxidation of Phosphorus by oxygen is called topotactic since it's carried out in different steps. First thing to be attacked by oxygen are the edges of the tetrahedron. A tetrahedron has 6 edges and each edge will be spanned by an oxygen forming the oxide P4O6.
The reason why the edges can be attacked is that in order to form the tetrahedron p-Orbitals are used. those have to bend in an unfavorable position to form so called "banana"-bonds which aren't stable at all due to an adverse angle. Oxygen can insert into this bond and form a triangle with two phosphorus atoms at a time. This is way more stable than white phosphorus.
Next thing is the Atoms themselves. Phosphorus could be either electrophilic or it could be nucleophilic. It's quite hard to decide which one it actually is if you compare it to different reactions. In comparison to Oxygen however Phosphorus is electrophilic meaning that the nucleophlic Oxygen can attack the Phosphorus Atoms in the tetrahedron as well forming P4O10 which is sometimes also called P2O5.
The energy released by this reaction is high enough to ignite the element.
Red Phosphorus itself has no defined structure but can be reduced to an image where it consists of long chains of tetrahedrons which are connected at one end. So basically a long chain of white phosphorus. When heat was applied the bonds broke and fragments of "whitish" Phosphorus form which ignite. Of course it doesn't form pure phosphorus that way. It probably could if I distilled it over but by heating for only a short period of time many fragments will form. This is why the reactant looked orange-yellowish and not white when it burned.
Red Phosphorus is heated in a test tube. The phosphorus catches fire and burns with a bright white flame forming thick white clouds.
Red Phosphorus is a so called allotrope of Phosphorus. Like Carbon can occur in Diamond, Graphite, Fullerens, ... Phosphorus has different structures as well.
The easiest would be a P2 with a triple bond analogous to Nitrogen. This exists but is very unstable forming a tetrahedron of 4 Phosphorus atoms, the white Phosphorus. When Phosphorus is freshly made white Phosphorus can be distilled off. Still this form isn't very stable at all and has to be kept in the dark and under inert gas to stay white for a longer period of time. Another way to store it is under water. If Phosphorus gets into contact with air for some time it will spontaneously catch fire.
Phosphorus is what many chemists call oxophile it tries to get Oxygen as fast as possible. This is used in synthetic chemistry as well. One example is the Wittig Reaction. Here the conformation of the molecule is formed by the tendency of a phosphorus to bind to an oxygen in the same molecule which twists the bonds into a fixed position.
The oxidation of Phosphorus by oxygen is called topotactic since it's carried out in different steps. First thing to be attacked by oxygen are the edges of the tetrahedron. A tetrahedron has 6 edges and each edge will be spanned by an oxygen forming the oxide P4O6.
The reason why the edges can be attacked is that in order to form the tetrahedron p-Orbitals are used. those have to bend in an unfavorable position to form so called "banana"-bonds which aren't stable at all due to an adverse angle. Oxygen can insert into this bond and form a triangle with two phosphorus atoms at a time. This is way more stable than white phosphorus.
Next thing is the Atoms themselves. Phosphorus could be either electrophilic or it could be nucleophilic. It's quite hard to decide which one it actually is if you compare it to different reactions. In comparison to Oxygen however Phosphorus is electrophilic meaning that the nucleophlic Oxygen can attack the Phosphorus Atoms in the tetrahedron as well forming P4O10 which is sometimes also called P2O5.
The energy released by this reaction is high enough to ignite the element.
Red Phosphorus itself has no defined structure but can be reduced to an image where it consists of long chains of tetrahedrons which are connected at one end. So basically a long chain of white phosphorus. When heat was applied the bonds broke and fragments of "whitish" Phosphorus form which ignite. Of course it doesn't form pure phosphorus that way. It probably could if I distilled it over but by heating for only a short period of time many fragments will form. This is why the reactant looked orange-yellowish and not white when it burned.



 forms when KCN is added to PdI2 and obviously something happened here.
If we ever get some Hg(CN)2 we might try to do it in a different way or even try to make the polymer but by now lets assume it is a cyanide complex of Pd(II). Palladium Chemistry: Tetracyanopalladate(II)](https://i.ytimg.com/vi/SGtimbtRnlQ/mqdefault.jpg)



![Mercury Chemistry: Reacting Hg[CrO4] with KCN
When we looked for more information on the thermal decomposition products of Hg2[CrO4] we found a small note in an old book that it would react with KCN to form Hg(CN)2 and Hg. We already showed this reaction in a previous video. So we got the idea to test the same thing with the Hg[CrO4]. When we tried it we did not get the black Hg(0) as no Hg(I) was present. Instead, it turned all yellow. It took us a few seconds to come up with the idea that perhaps the yellow [CrO4](-) ion could be released again once the Hg(CN)2 forms.
To test it we added some dilute H2SO4 in H2O2 to it to form the characteristic blue CrO(O2)2 complex. To be honest we dont know why it did not form for the Hg(I) reaction. It might be because we worked with smaller amounts of Hg2[CrO4], or the mercury masked it somehow. Mercury Chemistry: Reacting Hg[CrO4] with KCN](https://i.ytimg.com/vi/TJQQr09-caY/mqdefault.jpg)
![Thermochromism: Cu2[HgI4]
The explanation is the same as for the Silver compound.
We made this by reacting CuSO4 with the HgI4]2- solution we made in the previous video. In the first step, excess Iodide reacts with the Cu(II) and reduces it to Cu(I). The Cu(I) then precipitates a red Cu2[HgI4] from the solution. If this is heated a brown-black high-temperature modification forms.
We would like to take the rest of the space here and explain the structural differences again. As mentioned before the HT form is a zinc-blende-type. In solid state chemistry for a cubic packing, there are tetrahedral sites and octahedral sites, and there are 2 x more tetrahedral sites than there are ions, which make up the lattice. As explained, the Iodide builds an fcc, so there are 8 tetrahedral sites. If all those are occupied by counter-ions you get a Fluorite-Type (CaF2). The Fluorite can be thinned a bit to yield different structures like PbO, PtS, ... but also ZnS, the zinc-blende. In zinc blende, only half of the tetrahedral voids are filled. This structure is realized in the high-temperature form of M2[HgI4] as well because every tetrahedral void has a chance to be occupied. For an x-ray analysis, this appears to be cubic and zinc-blende-type then.
For the low-temperature form, the Hg(II) and Cu(I) do not mix but build up layers in one direction. The structure becomes tetragonal and you have to add another lattice in this direction to make a double-lattice. So there is a layer with half of the sites filled by Cu(I) followed by a layer with only 1 out of 4 sites filled with an Hg(II) followed by Cu(I) again.
That small structural change causes a minor decrease in the band gap for the high-temperature form.
According to Fukuda, and we love the books from Fukuda on Coordination chemistry, there is also a reaction which looks like this:
Cu(+) I(-) Hg(2+) to Cu(2+) I(-) Hg(+)
And this equilibrium is thermally settled and also changes the color of the compound, as electrons move from the Copper to the Mercury, the absorption becomes redshifted. One could see this as a Metal-to-Metal-charge Transfer, much like in Prussian Blue for example. Thermochromism: Cu2[HgI4]](https://i.ytimg.com/vi/TpNdQWtbkjw/mqdefault.jpg)

