Uploaded December 2017 | Updated November 2026, 4 hours ago
The explanation is the same as for the Silver compound.
We made this by reacting CuSO4 with the HgI4]2- solution we made in the previous video. In the first step, excess Iodide reacts with the Cu(II) and reduces it to Cu(I). The Cu(I) then precipitates a red Cu2[HgI4] from the solution. If this is heated a brown-black high-temperature modification forms.
We would like to take the rest of the space here and explain the structural differences again. As mentioned before the HT form is a zinc-blende-type. In solid state chemistry for a cubic packing, there are tetrahedral sites and octahedral sites, and there are 2 x more tetrahedral sites than there are ions, which make up the lattice. As explained, the Iodide builds an fcc, so there are 8 tetrahedral sites. If all those are occupied by counter-ions you get a Fluorite-Type (CaF2). The Fluorite can be thinned a bit to yield different structures like PbO, PtS, ... but also ZnS, the zinc-blende. In zinc blende, only half of the tetrahedral voids are filled. This structure is realized in the high-temperature form of M2[HgI4] as well because every tetrahedral void has a chance to be occupied. For an x-ray analysis, this appears to be cubic and zinc-blende-type then.
For the low-temperature form, the Hg(II) and Cu(I) do not mix but build up layers in one direction. The structure becomes tetragonal and you have to add another lattice in this direction to make a double-lattice. So there is a layer with half of the sites filled by Cu(I) followed by a layer with only 1 out of 4 sites filled with an Hg(II) followed by Cu(I) again.
That small structural change causes a minor decrease in the band gap for the high-temperature form.
According to Fukuda, and we love the books from Fukuda on Coordination chemistry, there is also a reaction which looks like this:
Cu(+)-----I(-)---------Hg(2+) to Cu(2+)-----I(-)---------Hg(+)
And this equilibrium is thermally settled and also changes the color of the compound, as electrons move from the Copper to the Mercury, the absorption becomes redshifted. One could see this as a Metal-to-Metal-charge Transfer, much like in Prussian Blue for example.
The explanation is the same as for the Silver compound.
We made this by reacting CuSO4 with the HgI4]2- solution we made in the previous video. In the first step, excess Iodide reacts with the Cu(II) and reduces it to Cu(I). The Cu(I) then precipitates a red Cu2[HgI4] from the solution. If this is heated a brown-black high-temperature modification forms.
We would like to take the rest of the space here and explain the structural differences again. As mentioned before the HT form is a zinc-blende-type. In solid state chemistry for a cubic packing, there are tetrahedral sites and octahedral sites, and there are 2 x more tetrahedral sites than there are ions, which make up the lattice. As explained, the Iodide builds an fcc, so there are 8 tetrahedral sites. If all those are occupied by counter-ions you get a Fluorite-Type (CaF2). The Fluorite can be thinned a bit to yield different structures like PbO, PtS, ... but also ZnS, the zinc-blende. In zinc blende, only half of the tetrahedral voids are filled. This structure is realized in the high-temperature form of M2[HgI4] as well because every tetrahedral void has a chance to be occupied. For an x-ray analysis, this appears to be cubic and zinc-blende-type then.
For the low-temperature form, the Hg(II) and Cu(I) do not mix but build up layers in one direction. The structure becomes tetragonal and you have to add another lattice in this direction to make a double-lattice. So there is a layer with half of the sites filled by Cu(I) followed by a layer with only 1 out of 4 sites filled with an Hg(II) followed by Cu(I) again.
That small structural change causes a minor decrease in the band gap for the high-temperature form.
According to Fukuda, and we love the books from Fukuda on Coordination chemistry, there is also a reaction which looks like this:
Cu(+)-----I(-)---------Hg(2+) to Cu(2+)-----I(-)---------Hg(+)
And this equilibrium is thermally settled and also changes the color of the compound, as electrons move from the Copper to the Mercury, the absorption becomes redshifted. One could see this as a Metal-to-Metal-charge Transfer, much like in Prussian Blue for example.



![Nickel Chemistry: [6xfaster] Ni(I)
We already showed a lot of interesting Oxidation states. Now we will make one for Nickel having the oxidation state +I. Except for a few like Copper, M(I) is quite rare. Especially for Iron a lot of Fe(I) compounds were suggested which turned out to be false. Then there are the Nitroprusside-analogous compounds, often mentioned in books on Cyanide chemistry. Those Nitrosylcyanometallates(I) are often characterized as M(I) which would probably include the Fe one to have Fe(I) as well. Those new results we talked about in our video on the Nitrate test are of course more accurate than the old texts which mention those Nitrosylcyanometalltes(I) which is why I am quite careful here and the reason why we will not show them in future videos.
Luckily there are other ways to make the Oxidation state +I. This time using Cyanide again. As the [Ni(CN)4](2-) containing Ni(II) is reduced using nascent Hydrogen the red, later dark Nickel(I)Cyanide precipitates.
This is sometimes referred to be a Tricyanonickelate and literature is full of Tricyanometallates such as the Manganate (a dark green compound we will show soon). Usually this is just a shortened version of the true structure. Here it is in fact a dimer containing a real Nickel - Nickel - bond.
The structure is:
[Ni2(CN)6](4-)
This can be further reduced using Potassium in liquid Ammonia....which we cannot do here of course to the
[Ni(CN)4](4-) containing a Nickel(0).
For Cyanides this is quite often the case, that the complex Cyanometallates are reduced using Potassium in Ammonia to the corresponding M(I) or M(0) compounds.
A word to our method here. As we showed it quite often nascent Hydrogen forms if Al is dissolved in acids. Now it is not really favorable to treat Cyanides with Acid so we decided to use KOH instead. Aluminium reacts with KOH to form [Al(OH)4](-) and nascent Hydrogen which reduces the Nickel(II).
Information to this experiment is from the book:
Holleman Wiberg - Lehrbuch der Anorganischen Chemie
We use this book quite often to explain compositions and structures.
The idea to use nascent Hydrogen as reducing agent is from Woelen
http://woelen.homescience.net/science/index.html Nickel Chemistry: [6xfaster] Ni(I)](https://i.ytimg.com/vi/UtWvrKtpusw/mqdefault.jpg)



![Tellurium Chemistry: Tellurium in HNO3 [2x]
In this video, we heat some Te in HNO3. Right as we add the black powder to the acid the acid turns yellow due to the formation of NOx gases. Heating the mixture causes the Te to produce a lot of gas bubbles while forming a thick brown gas. When we bubbled air through it later the acid became nearly colorless again.
What is happening is that the Te reduces the HNO3 to NOx, which forms yellow-red fumes while being oxidized to TeO2, which is colorless. Tellurium Chemistry: Tellurium in HNO3 [2x]](https://i.ytimg.com/vi/VRlKMVKwKjk/mqdefault.jpg)


