Uploaded April 2017 | Updated November 2026, 4 hours ago
Before we uploaded our video on making Diborane we had some discussions with other chemists about the thing burning being Diborane or Hydrogen. After we managed to take several shots of a green flame and also found plenty of texts about it in literature it was pretty obvious.
Many other combustible compounds can be made using strong reducing agents, too and often those produce a lot of Hydrogen as well. For Arsenic the compound AsH3 forms with strong reducing agents, in our case acidified NaBH4. But the hydrogen produced burns as well, so how can we distinguish those?
There is a famous test for Arsenic, called Marsh test. We never showed it before but only demonstrated a different way where the AsH3 reacts with Silver or Mercury. What you usually do is to burn the AsH3 and get a porcelain dish in front of the flame. The combustion produces elemental Arsenic which covers surfaces. We though if a test tube was filled with Ash3 wouldn't burning it in the test tube cause the formation of the tube itself?
So we took some Sodium Arsenite and added NaBH4, some water and then a few millilitres of HCl. Immediately gas is being produced. As we ignite it it burns with a pale blue (As) flame immediately producing a dark mirror of elemental As on the glass wall.
We will try this with other gases as well but this was the first demonstration of M-H compounds which is in this case a heavier version of Ammonia (NH3).
Before we uploaded our video on making Diborane we had some discussions with other chemists about the thing burning being Diborane or Hydrogen. After we managed to take several shots of a green flame and also found plenty of texts about it in literature it was pretty obvious.
Many other combustible compounds can be made using strong reducing agents, too and often those produce a lot of Hydrogen as well. For Arsenic the compound AsH3 forms with strong reducing agents, in our case acidified NaBH4. But the hydrogen produced burns as well, so how can we distinguish those?
There is a famous test for Arsenic, called Marsh test. We never showed it before but only demonstrated a different way where the AsH3 reacts with Silver or Mercury. What you usually do is to burn the AsH3 and get a porcelain dish in front of the flame. The combustion produces elemental Arsenic which covers surfaces. We though if a test tube was filled with Ash3 wouldn't burning it in the test tube cause the formation of the tube itself?
So we took some Sodium Arsenite and added NaBH4, some water and then a few millilitres of HCl. Immediately gas is being produced. As we ignite it it burns with a pale blue (As) flame immediately producing a dark mirror of elemental As on the glass wall.
We will try this with other gases as well but this was the first demonstration of M-H compounds which is in this case a heavier version of Ammonia (NH3).


![Nickel Chemistry: [6xfaster] Ni(I)
We already showed a lot of interesting Oxidation states. Now we will make one for Nickel having the oxidation state +I. Except for a few like Copper, M(I) is quite rare. Especially for Iron a lot of Fe(I) compounds were suggested which turned out to be false. Then there are the Nitroprusside-analogous compounds, often mentioned in books on Cyanide chemistry. Those Nitrosylcyanometallates(I) are often characterized as M(I) which would probably include the Fe one to have Fe(I) as well. Those new results we talked about in our video on the Nitrate test are of course more accurate than the old texts which mention those Nitrosylcyanometalltes(I) which is why I am quite careful here and the reason why we will not show them in future videos.
Luckily there are other ways to make the Oxidation state +I. This time using Cyanide again. As the [Ni(CN)4](2-) containing Ni(II) is reduced using nascent Hydrogen the red, later dark Nickel(I)Cyanide precipitates.
This is sometimes referred to be a Tricyanonickelate and literature is full of Tricyanometallates such as the Manganate (a dark green compound we will show soon). Usually this is just a shortened version of the true structure. Here it is in fact a dimer containing a real Nickel - Nickel - bond.
The structure is:
[Ni2(CN)6](4-)
This can be further reduced using Potassium in liquid Ammonia....which we cannot do here of course to the
[Ni(CN)4](4-) containing a Nickel(0).
For Cyanides this is quite often the case, that the complex Cyanometallates are reduced using Potassium in Ammonia to the corresponding M(I) or M(0) compounds.
A word to our method here. As we showed it quite often nascent Hydrogen forms if Al is dissolved in acids. Now it is not really favorable to treat Cyanides with Acid so we decided to use KOH instead. Aluminium reacts with KOH to form [Al(OH)4](-) and nascent Hydrogen which reduces the Nickel(II).
Information to this experiment is from the book:
Holleman Wiberg - Lehrbuch der Anorganischen Chemie
We use this book quite often to explain compositions and structures.
The idea to use nascent Hydrogen as reducing agent is from Woelen
http://woelen.homescience.net/science/index.html Nickel Chemistry: [6xfaster] Ni(I)](https://i.ytimg.com/vi/UtWvrKtpusw/mqdefault.jpg)



![Tellurium Chemistry: Tellurium in HNO3 [2x]
In this video, we heat some Te in HNO3. Right as we add the black powder to the acid the acid turns yellow due to the formation of NOx gases. Heating the mixture causes the Te to produce a lot of gas bubbles while forming a thick brown gas. When we bubbled air through it later the acid became nearly colorless again.
What is happening is that the Te reduces the HNO3 to NOx, which forms yellow-red fumes while being oxidized to TeO2, which is colorless. Tellurium Chemistry: Tellurium in HNO3 [2x]](https://i.ytimg.com/vi/VRlKMVKwKjk/mqdefault.jpg)



 from PdCl2
We mentioned in another video that we werent sure about what product might form if PdCl2 reacted with KCN. After a big search in old literature, we found a line that proves the formation of Tetracyanopalladate(II) if KCN is added to PdCl2 or [PdCl4](2-). And as you can see once we add it the brown color disappears. Palladium Chemistry: [Pd(CN)4](2-) from PdCl2](https://i.ytimg.com/vi/XHbn9Z3EaAA/mqdefault.jpg)