Uploaded September 2026 | Updated November 2026, 3 hours ago
Gamepad digital input mapping for PLC simulation: A maps to X1, B to X2, X to X3, Y to X4, the D-pad to X5 through X8, and shoulder buttons LB and RB to X9 and X10. Free ACC PLC Simulator.
⥠QUICK ANSWER
Gamepad digital input mapping in the ACC PLC Simulator turns your controller into a set of ten momentary pushbuttons. The face buttons map to the first four digital inputs: A is X1, B is X2, X is X3, and Y is X4. The D-pad maps to X5 through X8, one input per direction, and the shoulder buttons LB and RB map to X9 and X10. All ten of these are momentary, meaning each one is on while you hold the button and off the moment you release it, exactly like a real normally open pushbutton. In other words, your gamepad behaves like the pushbuttons on a real PLC trainer, giving you ten digital inputs to wire into your logic for things like start, stop, jog, mode selection, and resets. Combined with the analog sticks and triggers, which map to the analog inputs, one controller gives you a full set of digital and analog inputs for your PLC simulation, with nothing to install. The simulator is free and the link is below.
đŽ THE DIGITAL MAPPING
âļ A â X1
âļ B â X2
âļ X â X3
âļ Y â X4
âļ D-pad â X5 through X8 (one per direction)
âļ LB (left shoulder) â X9
âļ RB (right shoulder) â X10
âļ All momentary â on while held, off when released
đšī¸ LIKE A REAL PLC TRAINER
âļ Ten momentary digital inputs from one controller
âļ Each behaves like a normally open pushbutton
âļ Wire them to start, stop, jog, mode select, resets â whatever your logic needs
đī¸ TRY IT FREE â THE ACC PLC SIMULATOR
accautomation.ca/simulator
đ WHAT YOU'LL LEARN
â Exactly which gamepad control maps to X1 through X10
â How the face buttons, D-pad and shoulder buttons are assigned
â Why all ten inputs are momentary (on while held)
â Why it behaves like the pushbuttons on a real PLC trainer
â How digital and analog inputs combine on one gamepad
â FREQUENTLY ASKED
Q: How do the gamepad buttons map to the digital inputs?
A: A is X1, B is X2, X is X3, Y is X4, the D-pad is X5 through X8, and the shoulder buttons LB and RB are X9 and X10. All ten are momentary. Try it free at the link below.
Q: Are the inputs momentary or latching?
A: Momentary â each input is on while you hold the button and off when you release it, just like a real normally open pushbutton on a PLC trainer.
đ Try it free: accautomation.ca/simulator
đ MORE RESOURCES
âļ Gamepad Analog Input Mapping: youtube.com/shorts/75oFwVCbHdk
âļ Gamepad Buttons as Momentary Pushbuttons: youtube.com/shorts/hkMK7XlJQ7Y
âļ Run a Start-Stop-Jog Program With a Gamepad: youtube.com/shorts/nilrOfKYE3k
âļ Plug-and-Play Gamepad Setup: youtube.com/shorts/-8KeagwVZ7Y
âļ Free eBooks: accautomation.ca (subscribe for download)
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #Gamepad #DigitalInput #MomentaryInput #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Gamepad digital input mapping for PLC simulation: A maps to X1, B to X2, X to X3, Y to X4, the D-pad to X5 through X8, and shoulder buttons LB and RB to X9 and X10. Free ACC PLC Simulator.
⥠QUICK ANSWER
Gamepad digital input mapping in the ACC PLC Simulator turns your controller into a set of ten momentary pushbuttons. The face buttons map to the first four digital inputs: A is X1, B is X2, X is X3, and Y is X4. The D-pad maps to X5 through X8, one input per direction, and the shoulder buttons LB and RB map to X9 and X10. All ten of these are momentary, meaning each one is on while you hold the button and off the moment you release it, exactly like a real normally open pushbutton. In other words, your gamepad behaves like the pushbuttons on a real PLC trainer, giving you ten digital inputs to wire into your logic for things like start, stop, jog, mode selection, and resets. Combined with the analog sticks and triggers, which map to the analog inputs, one controller gives you a full set of digital and analog inputs for your PLC simulation, with nothing to install. The simulator is free and the link is below.
đŽ THE DIGITAL MAPPING
âļ A â X1
âļ B â X2
âļ X â X3
âļ Y â X4
âļ D-pad â X5 through X8 (one per direction)
âļ LB (left shoulder) â X9
âļ RB (right shoulder) â X10
âļ All momentary â on while held, off when released
đšī¸ LIKE A REAL PLC TRAINER
âļ Ten momentary digital inputs from one controller
âļ Each behaves like a normally open pushbutton
âļ Wire them to start, stop, jog, mode select, resets â whatever your logic needs
đī¸ TRY IT FREE â THE ACC PLC SIMULATOR
accautomation.ca/simulator
đ WHAT YOU'LL LEARN
â Exactly which gamepad control maps to X1 through X10
â How the face buttons, D-pad and shoulder buttons are assigned
â Why all ten inputs are momentary (on while held)
â Why it behaves like the pushbuttons on a real PLC trainer
â How digital and analog inputs combine on one gamepad
â FREQUENTLY ASKED
Q: How do the gamepad buttons map to the digital inputs?
A: A is X1, B is X2, X is X3, Y is X4, the D-pad is X5 through X8, and the shoulder buttons LB and RB are X9 and X10. All ten are momentary. Try it free at the link below.
Q: Are the inputs momentary or latching?
A: Momentary â each input is on while you hold the button and off when you release it, just like a real normally open pushbutton on a PLC trainer.
đ Try it free: accautomation.ca/simulator
đ MORE RESOURCES
âļ Gamepad Analog Input Mapping: youtube.com/shorts/75oFwVCbHdk
âļ Gamepad Buttons as Momentary Pushbuttons: youtube.com/shorts/hkMK7XlJQ7Y
âļ Run a Start-Stop-Jog Program With a Gamepad: youtube.com/shorts/nilrOfKYE3k
âļ Plug-and-Play Gamepad Setup: youtube.com/shorts/-8KeagwVZ7Y
âļ Free eBooks: accautomation.ca (subscribe for download)
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #Gamepad #DigitalInput #MomentaryInput #Shorts
Regards,
Garry
ACC Automation
accautomation.ca










