Uploaded September 2026 | Updated November 2026, 2 days ago
Learn the three non-negotiable safety rules for AI-generated PLC logic: verify before real outputs, own your safety requirements, use safety rated hardware.
⥠QUICK ANSWER
Three safety rules are non-negotiable when AI helps write PLC logic. First, never let AI-generated logic drive a real output until you have verified it yourself â test with the field wiring disconnected and watch the output indicator, not the motor. Second, AI does not know your safety requirements: emergency stops, safety relays, light curtains and guard interlocks are yours to design and yours to own. Third, keep true safety functions out of the PLC and out of the AI's scope entirely. Safety rated hardware handles safety.
â ī¸ THE GOLDEN RULE
If you cannot explain what a rung does, do not download it to a PLC.
đ ALL 22 RULES + FULL WRITE-UP
accautomation.ca/do-not-use-ai-in-plcs-until-you-see-this
đ WHAT YOU'LL LEARN
â Verify AI-generated logic with the field wiring disconnected before it ever drives a real output
â Watch the output indicator instead of the machine, so a wrong rung costs you nothing
â Recognize which functions are never the AI's job: emergency stops, safety relays, light curtains, guard interlocks
â Keep true safety functions outside the PLC entirely and let safety rated hardware do the work
â Understand where the AI's scope ends and your responsibility as the programmer begins
â FREQUENTLY ASKED
Q: Can AI write the emergency stop logic for my machine?
A: No. Emergency stops, safety relays, light curtains and guard interlocks are your responsibility to design, and true safety functions belong in safety rated hardware outside the PLC.
Q: How do I safely test AI-generated logic on a real PLC?
A: Disconnect the field wiring first, then run the program and watch the output indicators rather than the equipment. Nothing moves, and a wrong rung costs you nothing but time.
Q: What about fail-safe behavior on power loss or a failed sensor?
A: That is rule 4 â the programmer decides what the machine does when power drops, comms fail or a sensor dies. The AI has no idea what safe looks like for your process. The full article covers it.
đ All 22 rules, including verification, data protection and learning: accautomation.ca/do-not-use-ai-in-plcs-until-you-see-this
âļ FULL SERIES â AI vs the PLC (9 episodes, start at Episode 1):
youtube.com/watch?v=2duueD3bZq8&list=PLZuHeVFS86eA
đ MORE RESOURCES
âļ Using ChatGPT AI to Program a Click PLC: accautomation.ca/using-chatgpt-ai-to-program-a-click-plc
âļ PLC Programming Software and Protecting Your Work: accautomation.ca/plc-programming-software-what-it-is-and-how-to-protect-your-work
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Series: accautomation.ca/series
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #AI #MachineSafety #PLCTutorial #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Learn the three non-negotiable safety rules for AI-generated PLC logic: verify before real outputs, own your safety requirements, use safety rated hardware.
⥠QUICK ANSWER
Three safety rules are non-negotiable when AI helps write PLC logic. First, never let AI-generated logic drive a real output until you have verified it yourself â test with the field wiring disconnected and watch the output indicator, not the motor. Second, AI does not know your safety requirements: emergency stops, safety relays, light curtains and guard interlocks are yours to design and yours to own. Third, keep true safety functions out of the PLC and out of the AI's scope entirely. Safety rated hardware handles safety.
â ī¸ THE GOLDEN RULE
If you cannot explain what a rung does, do not download it to a PLC.
đ ALL 22 RULES + FULL WRITE-UP
accautomation.ca/do-not-use-ai-in-plcs-until-you-see-this
đ WHAT YOU'LL LEARN
â Verify AI-generated logic with the field wiring disconnected before it ever drives a real output
â Watch the output indicator instead of the machine, so a wrong rung costs you nothing
â Recognize which functions are never the AI's job: emergency stops, safety relays, light curtains, guard interlocks
â Keep true safety functions outside the PLC entirely and let safety rated hardware do the work
â Understand where the AI's scope ends and your responsibility as the programmer begins
â FREQUENTLY ASKED
Q: Can AI write the emergency stop logic for my machine?
A: No. Emergency stops, safety relays, light curtains and guard interlocks are your responsibility to design, and true safety functions belong in safety rated hardware outside the PLC.
Q: How do I safely test AI-generated logic on a real PLC?
A: Disconnect the field wiring first, then run the program and watch the output indicators rather than the equipment. Nothing moves, and a wrong rung costs you nothing but time.
Q: What about fail-safe behavior on power loss or a failed sensor?
A: That is rule 4 â the programmer decides what the machine does when power drops, comms fail or a sensor dies. The AI has no idea what safe looks like for your process. The full article covers it.
đ All 22 rules, including verification, data protection and learning: accautomation.ca/do-not-use-ai-in-plcs-until-you-see-this
âļ FULL SERIES â AI vs the PLC (9 episodes, start at Episode 1):
youtube.com/watch?v=2duueD3bZq8&list=PLZuHeVFS86eA
đ MORE RESOURCES
âļ Using ChatGPT AI to Program a Click PLC: accautomation.ca/using-chatgpt-ai-to-program-a-click-plc
âļ PLC Programming Software and Protecting Your Work: accautomation.ca/plc-programming-software-what-it-is-and-how-to-protect-your-work
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Series: accautomation.ca/series
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #AI #MachineSafety #PLCTutorial #Shorts
Regards,
Garry
ACC Automation
accautomation.ca








![17 to 42 Instructions in One Week: The Free PLC Sim Just Leveled Up
The free ACC PLC Simulator now has 42 ladder instructions, online editing, a drum sequencer, pointers and shift registers. Runs in your browser, no install.
⥠QUICK ANSWER
PLC simulator online editing means changing a rung while the program keeps scanning, exactly as you would on a plant floor where stopping the line is not an option. Press run, click edit, and an amber bar appears while the scan continues. New rungs show green, changed rungs amber, deleted rungs stay as gray ghosts. Press accept and the edit is validated first, then swapped in between two scans with timers, counters and data carried over, and cancel puts everything back. Alongside it this release adds a drum sequencer with a per step time and event bit, 4000 data registers from D1 to D4000, indirect addressing with D[D2] pointers that show the resolved address live, shift registers, jumps, master control zones, edge contacts, retentive timers and system bits.
đ FULL WALKTHROUGH + EXAMPLES
https://accautomation.ca/free-plc-simulator-update-online-editing-drum-sequencer/
âļ RUN IT NOW, FREE IN YOUR BROWSER
https://accautomation.ca/simulator/
âąī¸ TIMESTAMPS
0:00 - Introduction
0:17 - Why the ACC PLC Simulator Is Free and Browser Based
0:33 - Online Editing While the Program Keeps Scanning
1:06 - Drum Sequencer Driving a Traffic Intersection
1:22 - Inside the Drum Step Table
1:35 - 4000 Data Registers and Math Instructions
1:54 - Indirect Addressing with D[D2] Pointers
2:24 - Shift Registers, Jumps and Master Control Zones
2:44 - Edge Contacts, Retentive Timers and System Bits
3:05 - Hover Help, F1 and Structured Text Snippets
3:27 - Try It: Load the Traffic Drum Example
đ WHAT YOULL LEARN
â
Edit a rung online while the program keeps scanning, then accept it between two scans
â
Read the colour code: green for new rungs, amber for changed, gray ghosts for deleted
â
Drive a whole traffic intersection from one drum sequencer and its step table
â
Point one instruction at any register with D[D2] and watch the address resolve live
â
Track parts down a conveyor with bit shift registers, and skip rungs with jump and label
â
Use first scan bits, clock pulses, scan time and the real-time clock from system words
â FREQUENTLY ASKED
Q: What happens to my timers and counters when I accept an online edit?
A: They are carried over. The edit is validated first, then swapped in between two scans, so running values and data survive the change.
Q: What does D[D2] actually mean?
A: It is indirect addressing. The instruction uses the register whose number is stored in D2, so changing D2 points the same instruction at a different register. The block shows the resolved address live.
Q: Do I need to install anything or create an account?
A: No. It runs in a browser, it is free, there is nothing to install and no account is needed.
Q: Can I see what a jump is skipping?
A: Yes. Skipped rungs are drawn dimmed, so you can see at a glance which blocks are not being solved, and master control zones show which outputs drop when the zone turns off.
đ Full walkthrough and examples: https://accautomation.ca/free-plc-simulator-update-online-editing-drum-sequencer/
đ MORE RESOURCES
âļ Free PLC Simulator: https://accautomation.ca/simulator/
âļ Series: https://accautomation.ca/series/
âļ PLC Beginners Guide: https://accautomation.ca/programming/plc-beginners-guide/
âļ Free eBooks: https://accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: https://www.automationdirect.com/
âļ Parts Guide: https://www.accautomation.ca/purchase-find-parts/
đŦ Which instruction should get its own tutorial first? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #LearnPLC #PLCTutorial #FreeTraining
Regards,
Garry
ACC Automation
http://www.accautomation.ca 17 to 42 Instructions in One Week: The Free PLC Sim Just Leveled Up](https://i.ytimg.com/vi/_PJaUYQenfE/mqdefault.jpg)

