17 to 42 Instructions in One Week: The Free PLC Sim Just Leveled Up @ACCautomation
17 to 42 Instructions in One Week: The Free PLC Sim Just Leveled Up  @ACCautomation
Uploaded October 2026 | Updated November 2026, 2 days ago
The free ACC PLC Simulator now has 42 ladder instructions, online editing, a drum sequencer, pointers and shift registers. Runs in your browser, no install.

โšก QUICK ANSWER
PLC simulator online editing means changing a rung while the program keeps scanning, exactly as you would on a plant floor where stopping the line is not an option. Press run, click edit, and an amber bar appears while the scan continues. New rungs show green, changed rungs amber, deleted rungs stay as gray ghosts. Press accept and the edit is validated first, then swapped in between two scans with timers, counters and data carried over, and cancel puts everything back. Alongside it this release adds a drum sequencer with a per step time and event bit, 4000 data registers from D1 to D4000, indirect addressing with D[D2] pointers that show the resolved address live, shift registers, jumps, master control zones, edge contacts, retentive timers and system bits.

๐Ÿ“– FULL WALKTHROUGH + EXAMPLES
accautomation.ca/free-plc-simulator-update-online-editing-drum-sequencer

โ–ถ RUN IT NOW, FREE IN YOUR BROWSER
accautomation.ca/simulator

โฑ๏ธ TIMESTAMPS
0:00 - Introduction
0:17 - Why the ACC PLC Simulator Is Free and Browser Based
0:33 - Online Editing While the Program Keeps Scanning
1:06 - Drum Sequencer Driving a Traffic Intersection
1:22 - Inside the Drum Step Table
1:35 - 4000 Data Registers and Math Instructions
1:54 - Indirect Addressing with D[D2] Pointers
2:24 - Shift Registers, Jumps and Master Control Zones
2:44 - Edge Contacts, Retentive Timers and System Bits
3:05 - Hover Help, F1 and Structured Text Snippets
3:27 - Try It: Load the Traffic Drum Example

๐Ÿ“š WHAT YOU'LL LEARN
โœ… Edit a rung online while the program keeps scanning, then accept it between two scans
โœ… Read the colour code: green for new rungs, amber for changed, gray ghosts for deleted
โœ… Drive a whole traffic intersection from one drum sequencer and its step table
โœ… Point one instruction at any register with D[D2] and watch the address resolve live
โœ… Track parts down a conveyor with bit shift registers, and skip rungs with jump and label
โœ… Use first scan bits, clock pulses, scan time and the real-time clock from system words

โ“ FREQUENTLY ASKED
Q: What happens to my timers and counters when I accept an online edit?
A: They are carried over. The edit is validated first, then swapped in between two scans, so running values and data survive the change.

Q: What does D[D2] actually mean?
A: It is indirect addressing. The instruction uses the register whose number is stored in D2, so changing D2 points the same instruction at a different register. The block shows the resolved address live.

Q: Do I need to install anything or create an account?
A: No. It runs in a browser, it is free, there is nothing to install and no account is needed.

Q: Can I see what a jump is skipping?
A: Yes. Skipped rungs are drawn dimmed, so you can see at a glance which blocks are not being solved, and master control zones show which outputs drop when the zone turns off.
๐Ÿ‘‰ Full walkthrough and examples: accautomation.ca/free-plc-simulator-update-online-editing-drum-sequencer

๐Ÿ”— MORE RESOURCES
โ–ถ Free PLC Simulator: accautomation.ca/simulator
โ–ถ Series: accautomation.ca/series
โ–ถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โ–ถ Free eBooks: accautomation.ca (subscribe for download)

๐Ÿ›’ RECOMMENDED HARDWARE
โ–ถ Shop: automationdirect.com
โ–ถ Parts Guide: accautomation.ca/purchase-find-parts

๐Ÿ’ฌ Which instruction should get its own tutorial first? Drop a comment below.

๐Ÿ”” New tutorials every Monday โ€” Subscribe and hit the bell!

#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #LearnPLC #PLCTutorial #FreeTraining

Regards,
Garry
ACC Automation
accautomation.ca
17 to 42 Instructions in One Week: The Free PLC Sim Just Leveled UpPLC Programming Isnt Hard Its Dangerous!PLC I/O Breakdown Sensors Motors & Everything Between! #plc #automation #engineeringPLC Conveyor Logic Flowchart โ€” Simple Sequence [Tutorial]! โ›“๏ธWhen she asks to be spontaneous but your PLC is perfectly tuned ๐Ÿ˜‚ #shorts #plc #humorI Replaced a $5,000 PLC Trainer with a Free PLC Training SimulatorYour Brain vs. a PLCs Brain! #tech #humorThe Secret to Perfect PLC Simulator Scenes ๐Ÿ”ง #PLC #Industrial #AutomationHow PLC Stop Buttons Break the Seal-In!PLC Simulator: A Step-by-Step GuideUnleash Your PLC Power: Multiple Machines, One Program!Can AI Program a PLC?  I Tested It Live in the ACC PLC Simulator!
ACC Automation: PLC & Industrial Control Learning |

17 to 42 Instructions in One Week: The Free PLC Sim Just Leveled Up

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER