Uploaded January 2026 | Updated September 2026, 1 week ago
Ever dreamed of transforming your living space with a one-of-a-kind glowing masterpiece? Watch as I dive into the DIY build of a custom laser cut side table featuring mesmerizing LED acrylic backlighting, crafted with the precision of the xTool P3 CO2 laser cutter!
In this step-by-step tutorial, I'll guide you through the entire process from the LED lighting, to laser cutting wood and acrylic pieces on the xTool P3, assembling the stack, and wiring. This beautiful side table not only serves as functional furniture but also doubles as ambient lighting, perfect for modern homes, bedrooms, or offices. Keep reading as I will have the whole material list below.
Haven't purchased your XTOOL P3 yet? Links below for the best xTool prices!
✅ XTOOL P3:
👉 xtool.com/pages/xtool-p3-the-flagship-80w-co2-laser-cutter?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686
✅ AP2 MAX Fume Filtration System:
👉 xtool.com/products/xtool-safetypro-ap2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686&variant=46834634555631
In this video the following hose adapters were used to complete my custom fume extraction system:
✅ Low Profile 90 Degree Hose Adapter:
👉 embracemaking.com/products/xtool-f1-ultra-if2-ap2-90-degree-adapter
✅ 4 Inch Hose Adapter
👉 embracemaking.com/products/xtool-f1-ultra-to-4-inch-101mm-hose-adapter
In addition to the ones listed above you can find the whole hose adapter collection here:
✅ Fume Filtration and Extraction
👉 embracemaking.com/collections/fume-extraction
If you just want to push the fumes outdoors and don't need filtration then you should consider the xTool IF2:
✅ xTool Inline Fan 2:
👉 xtool.com/products/xtool-safetypro-if2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
Here are the materials and some suggested tools you will need to complete this project. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
✅ Tree of Life Graphic
👉 etsy.com/ca/listing/1674206530/3d-tree-of-life-mandala-multilayer-svg?ref=yr_purchases
✅ IKEA GLADOM
👉 ikea.com/us/en/p/gladom-tray-table-black-50411990
If you don't have an IKEA near you, this looks to be the EXACT same table from Amazon:
👉 amzn.to/3ZFbq0i
✅ COB LED Strip
👉 amzn.to/4q1uuAD
✅ 1/4" Thick Cast Clear Acrylic (18" x 24") 2 Pack
👉 amzn.to/4rkK8Iu
✅ 1/8" Basswood Sheets (18" x 18")
👉 amzn.to/4k3D9kG
✅ Magnetic Power Bank
👉 amzn.to/4a49LGo
✅ Zip Ties and Cable Clips
👉 amzn.to/3ZBNH11
✅ Step Drill Bit
👉 amzn.to/3Z6bnKN
✅ Milwaukee Cordless Drill
👉 amzn.to/4rl4m4X
✅ 25ft Long 4" Duct Hose
👉 amzn.to/49Wh2cN
If you are looking for products or items I've used around the shop:
✅ Bambu Lab PLA basic filament
👉 amzn.to/44U8XSL
✅ Air Quality Monitor
👉 amzn.to/3xgoaA2
Always remember to practice proper laser safety!
Thank you @xToollaser
0:00 Intro
0:39 Setup
3:20 The Build
#xtoolp3 #diyfurniture #lasercutting
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
Ever dreamed of transforming your living space with a one-of-a-kind glowing masterpiece? Watch as I dive into the DIY build of a custom laser cut side table featuring mesmerizing LED acrylic backlighting, crafted with the precision of the xTool P3 CO2 laser cutter!
In this step-by-step tutorial, I'll guide you through the entire process from the LED lighting, to laser cutting wood and acrylic pieces on the xTool P3, assembling the stack, and wiring. This beautiful side table not only serves as functional furniture but also doubles as ambient lighting, perfect for modern homes, bedrooms, or offices. Keep reading as I will have the whole material list below.
Haven't purchased your XTOOL P3 yet? Links below for the best xTool prices!
✅ XTOOL P3:
👉 xtool.com/pages/xtool-p3-the-flagship-80w-co2-laser-cutter?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686
✅ AP2 MAX Fume Filtration System:
👉 xtool.com/products/xtool-safetypro-ap2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686&variant=46834634555631
In this video the following hose adapters were used to complete my custom fume extraction system:
✅ Low Profile 90 Degree Hose Adapter:
👉 embracemaking.com/products/xtool-f1-ultra-if2-ap2-90-degree-adapter
✅ 4 Inch Hose Adapter
👉 embracemaking.com/products/xtool-f1-ultra-to-4-inch-101mm-hose-adapter
In addition to the ones listed above you can find the whole hose adapter collection here:
✅ Fume Filtration and Extraction
👉 embracemaking.com/collections/fume-extraction
If you just want to push the fumes outdoors and don't need filtration then you should consider the xTool IF2:
✅ xTool Inline Fan 2:
👉 xtool.com/products/xtool-safetypro-if2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
Here are the materials and some suggested tools you will need to complete this project. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
✅ Tree of Life Graphic
👉 etsy.com/ca/listing/1674206530/3d-tree-of-life-mandala-multilayer-svg?ref=yr_purchases
✅ IKEA GLADOM
👉 ikea.com/us/en/p/gladom-tray-table-black-50411990
If you don't have an IKEA near you, this looks to be the EXACT same table from Amazon:
👉 amzn.to/3ZFbq0i
✅ COB LED Strip
👉 amzn.to/4q1uuAD
✅ 1/4" Thick Cast Clear Acrylic (18" x 24") 2 Pack
👉 amzn.to/4rkK8Iu
✅ 1/8" Basswood Sheets (18" x 18")
👉 amzn.to/4k3D9kG
✅ Magnetic Power Bank
👉 amzn.to/4a49LGo
✅ Zip Ties and Cable Clips
👉 amzn.to/3ZBNH11
✅ Step Drill Bit
👉 amzn.to/3Z6bnKN
✅ Milwaukee Cordless Drill
👉 amzn.to/4rl4m4X
✅ 25ft Long 4" Duct Hose
👉 amzn.to/49Wh2cN
If you are looking for products or items I've used around the shop:
✅ Bambu Lab PLA basic filament
👉 amzn.to/44U8XSL
✅ Air Quality Monitor
👉 amzn.to/3xgoaA2
Always remember to practice proper laser safety!
Thank you @xToollaser
0:00 Intro
0:39 Setup
3:20 The Build
#xtoolp3 #diyfurniture #lasercutting
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
