Uploaded August 2024 | Updated September 2026, 1 week ago
In this video we are going to use the xTool F1 ULTRA to engrave a variety of steel and stainless steel materials used in the craft of knife making. For example, we have AEB-L Stainless Steel, 14C28N Stainless Steel, 1095 High Carbon Steel, and some 420J1 Stainless Steel knives. Through the video I will share with you all of my settings so you can achieve similar results.
This video topic was a suggestion from subscriber Mike and he very generously sent me the material samples, please go support him at the links below, thanks Mike!
► facebook.com/ToolnKnives
► youtube.com/@ToolnKnives
If you haven't purchased the xTool F1 ULTRA, use the link below to support my channel and get the best discount direct from xTool:
► xtool.com/products/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
The results from the engraving were very good in my opinion, but I am not an expert when it comes to knife making or the chemistry of materials. I wonder if the removal of the surface material will eventually lead to accelerated rusting and limit the use of these knives to decorative pieces? Let me know what you think in the comment section below.
Should the knives go through a passivation process afterwards? Will this ruin the engraving? Or should the type of marking for knives be limited to laser annealing? I would love to hear from anyone who has a lot of experience in this area.
Regardless, the results of both the blue laser and fiber laser were very good. The fiber laser creates crisp images with lots of detail and uniformity, whereas the blue laser can also produce nice details but the color consistency with multi-colored designs can be challenging. It will take lots of experimenting to get consistent results with colors on stainless steel.
0:00 Intro
2:14 Material Array Tests
6:14 Graphic Tests
11:48 Test Knives
17:48 Engrave Wooden Handles
20:15 Discussion
24:09 Outro
If you would like to support my channel and my work, check out the links below:
As an Amazon associate I may earn a small commission (at no extra cost to you):
Black Military Tags:
► amzn.to/4cKsJSC
Gold Military Tags
► amzn.to/4cVHHWc
You can find my dog bone tag fixture at the link below. With this fixture you also get the digital vector files for the shapes so you can mask your images as shown in this video.
► embracemaking.com/products/xtool-f1-s1-dog-bone-38mm-50mm-tags
38 dog bone tag:
► amzn.to/464YoeQ
► xtool.com/products/mixed-color-anodized-aluminum-bone-dog-tag?pr_prod_strat=jac&pr_rec_id=6b1e4c791&pr_rec_pid=8110120337647&pr_ref_pid=8110119616751&pr_seq=uniform&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
40mm dog bone tag:
► amzn.to/3LkNVT5
► xtool.com/products/mixed-color-stainless-steel-dog-tag?pr_prod_strat=jac&pr_rec_id=03da72190&pr_rec_pid=8110119616751&pr_ref_pid=8180493517039&pr_seq=uniform&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
50mm dog bone tag
► amzn.to/3Wlgsyc
► amzn.to/3LkNVT5
Interested in engraving round stainless steel tags? These can be found in various sizes in both metric and imperial. If you are using imperial sizes my round fixture works well:
► embracemaking.com/products/xtool-f1-multi-jig-and-circular-fixture-kit
If you're working with metric sizes I have this round fixture available as shown in this video:
► embracemaking.com/products/xtool-f1-s1-round-fixture-20-40mm-coins-and-tags
If you've already purchased the F1 ULTRA, you can find the controller holder here
► embracemaking.com/products/xtool-f1-ultra-controller-stand-and-mount
F1 to F1 ULTRA fixture adapter:
► embracemaking.com/products/xtool-f1-to-f1-ultra-fixture-adapter
Organize your fixtures with the Fixture Organizer Stand:
► embracemaking.com/products/xtool-f1-s1-fixture-organizer-stand
Below are products to build your smoke and fume mitigation solution to protect your health and safety!
Here you can find the 3" to 4" Hose Adapter:
► embracemaking.com/products/3-inch-76mm-to-4-inch-101mm-hose-adapter
xTool hose to xTool Smoke and Purifier Adapter:
► embracemaking.com/products/xtool-s1-3-hose-to-xtool-smoke-purifier
xTool Smoke and Fume Filtration System:
► xtool.com/products/pre-order-xtool-smoke-purifier?_pos=1&_sid=fa1fce9eb&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
xTool 6" Inline Duct Fan:
► xtool.com/products/xtool-inline-duct-fan?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
4" Inline Duct Fan with Controller
► amzn.to/4a91Nd4
Air Quality Monitor
► amzn.to/3xgoaA2
LARGE Tent Enclosure:
► amzn.to/4bRlA2y
Electric Screwdriver:
► amzn.to/3P43fpz
#xTool #xToollasermachine #fiberlaser #laserbusiness
Thank you to @xToollaser
In this video we are going to use the xTool F1 ULTRA to engrave a variety of steel and stainless steel materials used in the craft of knife making. For example, we have AEB-L Stainless Steel, 14C28N Stainless Steel, 1095 High Carbon Steel, and some 420J1 Stainless Steel knives. Through the video I will share with you all of my settings so you can achieve similar results.
This video topic was a suggestion from subscriber Mike and he very generously sent me the material samples, please go support him at the links below, thanks Mike!
► facebook.com/ToolnKnives
► youtube.com/@ToolnKnives
If you haven't purchased the xTool F1 ULTRA, use the link below to support my channel and get the best discount direct from xTool:
► xtool.com/products/xtool-f1-ultra-20w-fiber-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
The results from the engraving were very good in my opinion, but I am not an expert when it comes to knife making or the chemistry of materials. I wonder if the removal of the surface material will eventually lead to accelerated rusting and limit the use of these knives to decorative pieces? Let me know what you think in the comment section below.
Should the knives go through a passivation process afterwards? Will this ruin the engraving? Or should the type of marking for knives be limited to laser annealing? I would love to hear from anyone who has a lot of experience in this area.
Regardless, the results of both the blue laser and fiber laser were very good. The fiber laser creates crisp images with lots of detail and uniformity, whereas the blue laser can also produce nice details but the color consistency with multi-colored designs can be challenging. It will take lots of experimenting to get consistent results with colors on stainless steel.
0:00 Intro
2:14 Material Array Tests
6:14 Graphic Tests
11:48 Test Knives
17:48 Engrave Wooden Handles
20:15 Discussion
24:09 Outro
If you would like to support my channel and my work, check out the links below:
As an Amazon associate I may earn a small commission (at no extra cost to you):
Black Military Tags:
► amzn.to/4cKsJSC
Gold Military Tags
► amzn.to/4cVHHWc
You can find my dog bone tag fixture at the link below. With this fixture you also get the digital vector files for the shapes so you can mask your images as shown in this video.
► embracemaking.com/products/xtool-f1-s1-dog-bone-38mm-50mm-tags
38 dog bone tag:
► amzn.to/464YoeQ
► xtool.com/products/mixed-color-anodized-aluminum-bone-dog-tag?pr_prod_strat=jac&pr_rec_id=6b1e4c791&pr_rec_pid=8110120337647&pr_ref_pid=8110119616751&pr_seq=uniform&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
40mm dog bone tag:
► amzn.to/3LkNVT5
► xtool.com/products/mixed-color-stainless-steel-dog-tag?pr_prod_strat=jac&pr_rec_id=03da72190&pr_rec_pid=8110119616751&pr_ref_pid=8180493517039&pr_seq=uniform&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
50mm dog bone tag
► amzn.to/3Wlgsyc
► amzn.to/3LkNVT5
Interested in engraving round stainless steel tags? These can be found in various sizes in both metric and imperial. If you are using imperial sizes my round fixture works well:
► embracemaking.com/products/xtool-f1-multi-jig-and-circular-fixture-kit
If you're working with metric sizes I have this round fixture available as shown in this video:
► embracemaking.com/products/xtool-f1-s1-round-fixture-20-40mm-coins-and-tags
If you've already purchased the F1 ULTRA, you can find the controller holder here
► embracemaking.com/products/xtool-f1-ultra-controller-stand-and-mount
F1 to F1 ULTRA fixture adapter:
► embracemaking.com/products/xtool-f1-to-f1-ultra-fixture-adapter
Organize your fixtures with the Fixture Organizer Stand:
► embracemaking.com/products/xtool-f1-s1-fixture-organizer-stand
Below are products to build your smoke and fume mitigation solution to protect your health and safety!
Here you can find the 3" to 4" Hose Adapter:
► embracemaking.com/products/3-inch-76mm-to-4-inch-101mm-hose-adapter
xTool hose to xTool Smoke and Purifier Adapter:
► embracemaking.com/products/xtool-s1-3-hose-to-xtool-smoke-purifier
xTool Smoke and Fume Filtration System:
► xtool.com/products/pre-order-xtool-smoke-purifier?_pos=1&_sid=fa1fce9eb&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
xTool 6" Inline Duct Fan:
► xtool.com/products/xtool-inline-duct-fan?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
4" Inline Duct Fan with Controller
► amzn.to/4a91Nd4
Air Quality Monitor
► amzn.to/3xgoaA2
LARGE Tent Enclosure:
► amzn.to/4bRlA2y
Electric Screwdriver:
► amzn.to/3P43fpz
#xTool #xToollasermachine #fiberlaser #laserbusiness
Thank you to @xToollaser
