Uploaded March 2024 | Updated September 2026, 2 weeks ago
If you want to upgrade your printer you'll want to add these!
Help support this channel! patreon.com/Needitmakeit
This is the 4th video now on this printer and there will be many more, but that's only if we can make this modification to the printer. This printer and the SE aren't easy to upgrade and modify, they look good, but we need some attachment points. This video is all about how to add them.
I will be making a follow up video for the optional brackets to provide support to the Z axis posts so make sure to subscribe to see that video pop up.
M3 x 10mm Brass Heat Set Inserts
Amazon US - amzn.to/4ca5C3Y (Supports the channel)
Amazon Canada - amzn.to/3ICeIZZ (Supports the channel)
US Amazon Link for Linear Rails: (This link supports the channel)
amzn.to/4a5YP9w - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Aliexpress Link for Linear Rails: (This link supports the channel) - They don't have stock of the 350, you can buy 400 and cut it to size, hopefully stock comes back soon!
https://s.click.aliexpress.com/e/_DDtCTWZ - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Printed Parts:
Reinforcement Blocks - makerworld.com/en/models/373923
Linear Rails - makerworld.com/en/models/239219#profileId-255056
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
BAMBU PRINTERS
shrsl.com/4aghz
CREALITY PRINTERS
shrsl.com/4aghy
CREALITY HYPER PLA
shrsl.com/4aghn
#crealityEnder3
#creality
#Ender3
If you want to upgrade your printer you'll want to add these!
Help support this channel! patreon.com/Needitmakeit
This is the 4th video now on this printer and there will be many more, but that's only if we can make this modification to the printer. This printer and the SE aren't easy to upgrade and modify, they look good, but we need some attachment points. This video is all about how to add them.
I will be making a follow up video for the optional brackets to provide support to the Z axis posts so make sure to subscribe to see that video pop up.
M3 x 10mm Brass Heat Set Inserts
Amazon US - amzn.to/4ca5C3Y (Supports the channel)
Amazon Canada - amzn.to/3ICeIZZ (Supports the channel)
US Amazon Link for Linear Rails: (This link supports the channel)
amzn.to/4a5YP9w - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Aliexpress Link for Linear Rails: (This link supports the channel) - They don't have stock of the 350, you can buy 400 and cut it to size, hopefully stock comes back soon!
https://s.click.aliexpress.com/e/_DDtCTWZ - You'll need 2 'C' Carriages per rail (4 carriages total)
Linear rail carriages can be purchased separately if you can't find the entire kit - Model # MGN12C-350mm
Printed Parts:
Reinforcement Blocks - makerworld.com/en/models/373923
Linear Rails - makerworld.com/en/models/239219#profileId-255056
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
BAMBU PRINTERS
shrsl.com/4aghz
CREALITY PRINTERS
shrsl.com/4aghy
CREALITY HYPER PLA
shrsl.com/4aghn
#crealityEnder3
#creality
#Ender3
