Is the Bambu H2D 3D printer actually a good Laser, Cutter and Plotter too? @NeedItMakeIt

Uploaded May 2025 | Updated September 2026, 2 weeks ago

I can't just call it a 3D printer anymore!
Help support this channel! patreon.com/Needitmakeit

A short list to help support this channel, thank you so much for your help!
Bambu H2D - shrsl.com/4v8te
QIDI PLUS4 - qidi3d.com/products/plus4-3d-printer?sca_ref=5735403.eknTRISP1e
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos - shrsl.com/4ks0j
Bambu Super Tack - shrsl.com/4sjgn
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe

Overall a very impressive MACHINE, the 40W laser is plenty powerful and the ability to mark on metals does make quite a bit of difference, it's not going to match a Fiber laser, but that's a 4-8K machine on it's own, so pretty good results overall I'd say. I'll continue to experiment with the plotter and maybe there is a real hand-written style that I can use to write nice cards for gifts or for artwork around the home and shop. The decals actually are my favorite thing to do now, but I'll probably run out of decal work pretty soon, there are only so many decals you can put on a wheelbarrow or a tractor before people start wondering about a person's sanity :).

I hope you enjoyed the video!

#h2d
#bambu
#bambulab

Is the Bambu H2D 3D printer actually a good Laser, Cutter and Plotter too?

How to Build a Blacksmith Forge from Scrap

2 Simple Ways to Make Stronger 3D Prints + an Experimental Way

SLOW MY FAST PRINTER? #creality3dprinter #3dprinter #bambu

$Let Your Creality K1 MAX and K1 Printers Soak for the Best First Layers This is really easy to do, and now you dont need to think to get better results. Help support this channel! https://www.patreon.com/Needitmakeit Youre not along if youre having trouble getting a good first layer on your K1 or K1 Max printer. With the Max, we found out that with such a fast heating cycle, and the larger and thin bed were getting a lot of warpage, but we also found that the warpage didnt stop right away, the bed changed shape and then began to change back. Most of the settling back happened within 10 minutes but it continued for as long as 20 minutes. In this video I wanted to show you a way to pre-heat automatically so that you dont need to think about it. **Special note: The Max takes only 5 minutes to reach 100C, its far faster than most other printers, adding a bit of time back to this heating cycle is a good idea and will give you the best results with the thickness of aluminum plate were dealing with. Another way to support this channel indirectly is through my Amazon affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support! NEW MIC (I bought this) https://amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid) https://amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy) BAMBU PRINTERS https://shrsl.com/4aghz CREALITY PRINTERS https://shrsl.com/4aghy CREALITY HYPER PLA https://shrsl.com/4aghn Here is the info you need to copy and paste (Starting with M190 of course) These are all for 9 minutes, I will work towards a follow up video to set a variable time... I dont know how to do this yet. ***WE HAVE AN UPDATE (Originals are first, we also have auto-time adjust below) Thanks to @stew675 for this very elegant solution ORCA(Original)🐋 M190 S[bed_temperature_initial_layer_single] G4 P540000 ORCA(Auto-time)🐋 M190 S[bed_temperature_initial_layer_single] G4 P{max(0, first_layer_bed_temperature[0] -10) * 6000} CREALITY PRINT(Original)🟦 M190 S[material_bed_temperature_layer_0] G4 P540000 CREALITY PRINT(Auto-time)🟦 M190 S[material_bed_temperature_layer_0] G4 P{max(0, first_layer_bed_temperature[0] -10) * 6000} PRUSA SLICER(Original)🟠 M190 S[first_layer_bed_temperature] G4 P540000 PRUSA SLICER(Auto-time)🟠 M190 S[first_layer_bed_temperature] G4 P{max(0, first_layer_bed_temperature[0] -10) * 6000} #creality #crealityk1 #3dprinting$

My Prusa MK4S COLD SPOTS were bad, so I fixed them! Now the MK4S has the most even heat

Printer VS Printer - Creality K1 faces off against the Bambu X1C at HIGH SPEED - Who Wins?

Your Bambu H2D needs one of these to unleash its FULL POTENTIAL

Strong 3D Printed Connections on BIG parts

The next generation of 3D printers is coming, but Im not buying one unless it does these two steps

DEEP engrave every stone with the exact same settings using my MOPA fiber laser - SHORT

The Ultimate 3D printable tabletop gaming organization system