DEEP engrave every stone with the exact same settings using my MOPA fiber laser

Uploaded May 2026 | Updated September 2026, 2 weeks ago

This laser is incredible, but there are so many settings to try, luckily I finally figured it out!

needitmakeit ($200 off)
Lumos Ultra - wecreat.com/products/lumos-ultra-6w-uv-60w-100w-mopa-laser-engraver

Help support this channel! patreon.com/Needitmakeit

For deep stone engravings:

Select Relief Engraving
Select Embossment
Number of Layers = 10
Power = 98
Speed = 700mm/s
Pulse Width = 350
Frequency = 30
Line Density = 200
Scanning Angle = 30

Z axis descent = On
Every N laser = 1
Descend N mm = 0.05mm

Cleaning layer = On
Every N layers = 5
Power = 50
Speed = 1500
Line Density = 200
Frequency = 100
Pulse Width = 250
Number of Passes = 1
Engraving complete = On

A short list to help support this channel, thank you so much for your help!
Bambu X2D - tidd.ly/41KXP8S (Featured packed at a great price)
Bambu H2C - tidd.ly/3K3sSY9 (If you print with color, this is the way)
Bambu P2S - tidd.ly/3ISZkfq (Best value)
Bambu H2S - tidd.ly/4olSRbL (Most options for money)
Bambu H2D - tidd.ly/4q9RsHk (A dual color beast)
Bambu Filament Shown in Videos - tidd.ly/4hn6TYI
Rode Wireless ME mic (Saved me about 4+ hours/vid) - amzn.to/3vcMKAr
Mag clip (Super handy, but a little pricy) - amzn.to/3NBFvZe

#wecreat
#laser
#3dprinting

DEEP engrave every stone with the exact same settings using my MOPA fiber laser - SHORT

The Ultimate 3D printable tabletop gaming organization system

$Simple Ways to Make Stronger 3D Prints NUMBER TWO What happens when you do real drop tests on 3d prints? Do they bend, do they break, do they shatter? In this video well find out by testing different materials and designs at several DROP heights. Help support this channel! https://www.patreon.com/Needitmakeit I see a lot of testing videos, some of them are useful to compare materials against each other, but theyre not as useful when you want to apply them to real designs. If we want to protect something, should we use ABS? How about PETG? Or Maybe youre the PC type. I have an okay sense about each of the materials, but I couldnt tell you which material was best to protect expensive equipment, and which material could take continued abuse and not just break after one drop. This video is dedicated to doing realistic dop testing to see if we can get some real answers to those questions so we have a better idea of how to design 3d printed parts, and that we also have a sense about which materials perform the best under which conditions. In the previous video, we tested only PETG, it has a good reputation for being flexible, but it also has this other very strange property of becoming brittle and fracturing at a certain point. In this video were going to see if we can figure out the right mix of flex and strength for that material so we can use it and have the confidence that itll do the job. Which material do you think will perform the best? Check out the video for all of the details, it was a lot of fun, and I learned quite a bit. Lets just say that it isnt all about the size, there is more to it than that. Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support! NEW MIC (I bought this) https://amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid) https://amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy) BAMBU PRINTERS https://shrsl.com/4aghz CREALITY PRINTERS https://shrsl.com/4aghy CREALITY HYPER PLA https://shrsl.com/4aghn Original Design: https://www.thingiverse.com/thing:4757295 #bambu #crealityk1 #3dprinting$

Why is My Bambu X1 Carbon Printer Not Wiping?

These tricks make our 3D printable gaming organization system called HEXSTORA even better for you

Quick and Simple Way to Level Your Creality K1 or K1 Max Bed #3dprinter #crealityk1 #k1

Which is the best, the Bambu Super Tack or the BIQU Frostbite or Glacier?

Does the New Bambu H2C have COLD SPOTS?? Lets check it in the most extreme conditions to find out

How strong and impact resistant are your 3d prints? Lets find out!

Can the NEW Bambu P2S use the original Bambu AMS? Here is your answer. #bambu #BambuP2S #p2s

Which is better? A 3D printer or a CNC machine? Lets find out!

STRONG and FULLY 3D Printed Arms for your Ender 3 KE and SE