Design AND Print your own PRINT IN PLACE - Feat. Creality K1 #3dprinting # #dprinting @NeedItMakeIt

Uploaded October 2023 | Updated September 2026, 2 weeks ago

FULL VIDEO:
youtu.be/zEKWZbtndX4

The secrets to successfully printing a Print in place model (PIP) revealed!

In this video we'll have a look at some successful PIP models from Printables.com and then use those techniques to design our own on the Creality K1 Printer.

Lots of people have had problems with printing these kinds of models, and I have as well. There are a lots of settings on a printer which impact the final product, there are also design details that impact the parts quite a bit as well. We'll review the most important parts of both to come up with a design that will print well even on poorly tuned 3d Printers.

The model we design is a fairly simple hinge which fixes a common problem on the Coleman Coolers.

As mentioned in video:
printables.com/model/605305-rod-sloth-fits-most-3d-printers

Geared Hinge:
printables.com/model/120766-print-in-place-geared-hinge

Cable Winder:
printables.com/model/564262-portable-cable-organizer-winder

If you're interested in checking out Bambu / Creality Printers and filament, here is my affiliate link (a small portion of any sales helps fund future videos):

BAMBU PRINTERS
shrsl.com/4aghz

CREALITY PRINTERS
shrsl.com/4aghy

CREALITY HYPER PLA
shrsl.com/4aghn

Link to hinge STL file:
patreon.com/user/shop/print-in-place-coleman-cooler-repl-hinge-32846?u=19235866&utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=productshare_creator&utm_content=join_link

Thanks to everyone for supporting the channel, I'm happy to announce that I've moved to 2 days a week on Content Creation. The goal is to get to be full-time by Fall of 2023.

Thank you again to my long-time supporters of the channel on Patreon. If you're interested in supporting the channel, I'll be posting behind the scenes videos there starting next week as well as interacting directly if you have video content ideas or questions or ideas of any kind. Here is the link to join!

patreon.com/Needitmakeit

If you are struggling with problems and you need help, send me an email or write in the comments.

#ender3
#bambu
#3dprinting

Design AND Print your own PRINT IN PLACE - Feat. Creality K1 #3dprinting # #dprinting

ALL UNLOCKS revealed for HEXSTORA, our 3D printable gaming organizational system on Kickstarter

Is the Bambu H2D 3D printer actually a good Laser, Cutter and Plotter too?

How to Build a Blacksmith Forge from Scrap

2 Simple Ways to Make Stronger 3D Prints + an Experimental Way

SLOW MY FAST PRINTER? #creality3dprinter #3dprinter #bambu

$Let Your Creality K1 MAX and K1 Printers Soak for the Best First Layers This is really easy to do, and now you dont need to think to get better results. Help support this channel! https://www.patreon.com/Needitmakeit Youre not along if youre having trouble getting a good first layer on your K1 or K1 Max printer. With the Max, we found out that with such a fast heating cycle, and the larger and thin bed were getting a lot of warpage, but we also found that the warpage didnt stop right away, the bed changed shape and then began to change back. Most of the settling back happened within 10 minutes but it continued for as long as 20 minutes. In this video I wanted to show you a way to pre-heat automatically so that you dont need to think about it. **Special note: The Max takes only 5 minutes to reach 100C, its far faster than most other printers, adding a bit of time back to this heating cycle is a good idea and will give you the best results with the thickness of aluminum plate were dealing with. Another way to support this channel indirectly is through my Amazon affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support! NEW MIC (I bought this) https://amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid) https://amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy) BAMBU PRINTERS https://shrsl.com/4aghz CREALITY PRINTERS https://shrsl.com/4aghy CREALITY HYPER PLA https://shrsl.com/4aghn Here is the info you need to copy and paste (Starting with M190 of course) These are all for 9 minutes, I will work towards a follow up video to set a variable time... I dont know how to do this yet. ***WE HAVE AN UPDATE (Originals are first, we also have auto-time adjust below) Thanks to @stew675 for this very elegant solution ORCA(Original)🐋 M190 S[bed_temperature_initial_layer_single] G4 P540000 ORCA(Auto-time)🐋 M190 S[bed_temperature_initial_layer_single] G4 P{max(0, first_layer_bed_temperature[0] -10) * 6000} CREALITY PRINT(Original)🟦 M190 S[material_bed_temperature_layer_0] G4 P540000 CREALITY PRINT(Auto-time)🟦 M190 S[material_bed_temperature_layer_0] G4 P{max(0, first_layer_bed_temperature[0] -10) * 6000} PRUSA SLICER(Original)🟠 M190 S[first_layer_bed_temperature] G4 P540000 PRUSA SLICER(Auto-time)🟠 M190 S[first_layer_bed_temperature] G4 P{max(0, first_layer_bed_temperature[0] -10) * 6000} #creality #crealityk1 #3dprinting$

My Prusa MK4S COLD SPOTS were bad, so I fixed them! Now the MK4S has the most even heat

Printer VS Printer - Creality K1 faces off against the Bambu X1C at HIGH SPEED - Who Wins?

Your Bambu H2D needs one of these to unleash its FULL POTENTIAL

Strong 3D Printed Connections on BIG parts

The next generation of 3D printers is coming, but Im not buying one unless it does these two steps