4WD Dirt Track River Crossing, Off-Road Caravan RV, towed by 4x4 Nissan Pathfinder. @GavinClarkdiy
4WD Dirt Track River Crossing, Off-Road Caravan RV, towed by 4x4 Nissan Pathfinder.  @GavinClarkdiy
Uploaded January 2016 | Updated September 2026, 5 hours ago
We had driven this track a few times in the past, but this was the most water I have ever seen across it. The road in and out is not a straight line at this crossing, so I thought it was important to pick the line I was to take. (Unless there is something in the water that may eat you). It's well worth the time to first walk any water crossing and check the bottom for hardness, rocks, or holes and the best line to take. Traction on the exit was not going to be a problem, and after walking it, a nice smooth wide ark was the way to go. I decided it would be OK with the off-road caravan as long as I had a bit of momentum when I got to the water. All went to plan, and we got through to our campsite without any problems. Nothing like a wide river crossing to make a camping trip feel like an adventure. Our 4x4 Nissan Pathfinder did the job nicely.
.
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
.
4WD Dirt Track River Crossing, Off-Road Caravan RV, towed by 4x4 Nissan Pathfinder.I make a Strong Square Tube to Bend the 7mm Steel Rebar for my Projects. MIG Welding ProjectEasy DIY Embroidery Thread Holder for Sewing Room Organization Ideas and cotton storageBench Vise Restoration, Old Joplin Bench Vise, strip to bare metal, lubricate, apply clear coat.Turtles and more Turtles in the Ross River in Townsville. I have never seen so many.Making an Industrial Style Metal Handle - MIG Welding ProjectSolo 4x4 trip to Lake Eyre in the remote Australian Outback. This was a Bucket List place for me.I make a Sheepshank Knot by Bending Rebar - Rebar Metal Art Project.Welding Square Tubing at 90 Degrees Joint Preparation, the 3 ways I Fabricate the corner.Gavin Clark presenting my Youtube Channel Trailer.The DIY Overhead Clearance Stick every Caravan Motorhome RV or Travel Trailer should have.I make an Industrial Design Style Coat Hanger using Steel Rebar Rod - MIG Welder Project
Gavin Clark DIY |

4WD Dirt Track River Crossing, Off-Road Caravan RV, towed by 4x4 Nissan Pathfinder.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER