28V-2A Adjustable Low EMI Switching Power Supply @MyVanitar
28V-2A Adjustable Low EMI Switching Power Supply  @MyVanitar
Uploaded May 2023 | Updated November 2026, 4 days ago
Adjustable Low EMI Switching Power Supply
======================================
Altium Designer + License (Free): altium.com/yt/myvanitar
======================================
Altium 365: altium.com/altium-365
======================================
OctoPart: octopart.com
======================================
Article: pcbway.com/blog/technology/Adjustable_Low_EMI_Switching_Power_Supply_9611437d.html
======================================
Gerber/PCB: pcbway.com/project/shareproject/Adjustable_Low_EMI_Switching_Power_Supply_c5744126.html
======================================
Other Videos: bit.ly/2N9OlPa
======================================
A power supply is an essential tool on every electronics bench. The TPS54202 is a highly efficient 2A synchronous buck converter with a wide 28V input voltage range and low EMI figures, making it suitable for various applications. These features make the TPS54202 an excellent choice for building a power supply.
To achieve a low noise level and ensure high performance, I implemented a variety of input and output filters, along with following several PCB design techniques. The chip operates at a switching frequency of 500KHz and is equipped with internal loop compensation. Setting up the power supply is simple—just connect the input to a step-down AC transformer (e.g., 220V to 15V) and use a multiturn potentiometer to adjust the output voltage to your desired level.
For the schematic and PCB design, I utilized Altium Designer 23 and shared the project with my friends for feedback and updates using Altium-365. The fast component search engine, Octopart, proved invaluable in quickly obtaining component information and generating the Bill of Materials (BOM). To ensure high-quality fabricated boards, I sent the Gerber files to PCBWay.
I tested the circuit for output noise and load step response using Siglent SDS2102X Plus oscilloscope and Siglent SDL1020X-E DC load. I am confident that this circuit will meet your requirements for a compact and efficient power supply, providing reliable performance on your electronics bench.
28V-2A Adjustable Low EMI Switching Power SupplyDouble Lithium ion/Polymer USB Type-C Charger CircuitIsolated Flyback DC to DC Converter - Part 2 (Testing)Power Bank + Mobile Charger + Emergency LED Light CircuitDSN-VC288 Voltmeter-Ammeter Review Using The Siglent SDM3045X MultimeterWhat is this Mysterious Silent Signal at 171.6MHz?!DIY 4S Li‑Ion BMS With S‑8254AAMFT – Reliable 18650 Battery Pack DesignRP2040 and INA219, 3.2-inch GUI for DC Voltage, Current, and PowerPortable Ultrasonic Range Finder Using CH32V003How to Spot a Fake Soldering Iron 😮9W AC LED Light Bulb Circuit12V-7A AC to DC Switching Power Supply [SMPS]
MyVanitar |

28V-2A Adjustable Low EMI Switching Power Supply

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER