Uploaded February 2022 | Updated November 2026, 2 days ago
Double Lithium ion/Polymer USB Type-C Charger Circuit/Schematic
======================================
Altium Designer + License (Free): altium.com/yt/myvanitar
======================================
Article: pcbway.com/blog/technology/Double_Lithium_Ion_Lithium_Polymer_USB_Type_C_Charger_863d1ae1.html
pcbway.com/project/shareproject/USB_Charger_Project_40bea026.html
======================================
Nowadays, Lithium batteries are used extensively in portable devices, such as cellphones, laptop computers, electronic gadgets, … etc. There is a standard industry-defined procedure (cycle) for charging the lithium-ion/lithium-polymer batteries, otherwise, the lifetime of the batteries is reduced significantly or even they might explode and catch fire. As a basic rule of thumb, a lithium battery should be charged at the rate of 0.5C to 1C. In this article/video, I have introduced a universal double lithium battery charger that the charging current (C rate) can be adjusted simply by changing a resistor value. You just need a 5V power source (such as a mobile charger) and a USB Type-C cable. The charging chip is MCP73831.
To design the schematic and PC, I used Altium Designer 22 and the SamacSys component libraries (Altium Plugin). To get high-quality PCB boards, I sent the Gerbers to PCBWay, then found and purchased original components using componentsearchengine.com. To examine the charging current/voltage, I used the Siglent SDM3045X multimeter. Isn’t cool?!, So let’s get started!
CHAPTERS
00:00 - Introduction
01:50 - Lithium Battery Charger Project Ingredients
03:16 - Schematic and PCB Design Notes
07:10 - How & Where to Purchase Original Components
08:44 - Practical Test of the Battery Charger
10:18 - Fully Charged Battery Voltage Check using Siglent SDM3045X Multimeter
-----------------------------------------------------------------------
Music by Atch
SoundCloud: bit.ly/AtchSoundCloud
Spotify: bit.ly/AtchSpotify
Instagram: instagram.com/atchmusic
-----------------------------------------------------------------------
Double Lithium ion/Polymer USB Type-C Charger Circuit/Schematic
======================================
Altium Designer + License (Free): altium.com/yt/myvanitar
======================================
Article: pcbway.com/blog/technology/Double_Lithium_Ion_Lithium_Polymer_USB_Type_C_Charger_863d1ae1.html
pcbway.com/project/shareproject/USB_Charger_Project_40bea026.html
======================================
Nowadays, Lithium batteries are used extensively in portable devices, such as cellphones, laptop computers, electronic gadgets, … etc. There is a standard industry-defined procedure (cycle) for charging the lithium-ion/lithium-polymer batteries, otherwise, the lifetime of the batteries is reduced significantly or even they might explode and catch fire. As a basic rule of thumb, a lithium battery should be charged at the rate of 0.5C to 1C. In this article/video, I have introduced a universal double lithium battery charger that the charging current (C rate) can be adjusted simply by changing a resistor value. You just need a 5V power source (such as a mobile charger) and a USB Type-C cable. The charging chip is MCP73831.
To design the schematic and PC, I used Altium Designer 22 and the SamacSys component libraries (Altium Plugin). To get high-quality PCB boards, I sent the Gerbers to PCBWay, then found and purchased original components using componentsearchengine.com. To examine the charging current/voltage, I used the Siglent SDM3045X multimeter. Isn’t cool?!, So let’s get started!
CHAPTERS
00:00 - Introduction
01:50 - Lithium Battery Charger Project Ingredients
03:16 - Schematic and PCB Design Notes
07:10 - How & Where to Purchase Original Components
08:44 - Practical Test of the Battery Charger
10:18 - Fully Charged Battery Voltage Check using Siglent SDM3045X Multimeter
-----------------------------------------------------------------------
Music by Atch
SoundCloud: bit.ly/AtchSoundCloud
Spotify: bit.ly/AtchSpotify
Instagram: instagram.com/atchmusic
-----------------------------------------------------------------------









![12V-7A AC to DC Switching Power Supply [SMPS]
12V-7A AC to DC Flyback Switching Power Supply [SMPS]
Article: https://www.powerelectronicsnews.com/12v-7a-ac-to-dc-flyback-switching-power-supply/
Altium Designer + Legal License (Free): https://www.altium.com/yt/myvanitar
Altium 365: https://www.altium.com/altium-365
OctoPart: https://octopart.com
Other Videos: http://bit.ly/2N9OlPa
The most essential part of any electronic device is the power supply unit. Any instability or malfunction in this part causes the device to stop its duty or show weird behavior. In this article/video, I introduced an AC-to-DC flyback switching power supply that converts 180V-260VAC to 12VDC, which can be used in a variety of applications.
The maximum power delivery of this power supply is 84W, which means it can handle 7A continuously at 12V output. The transformer can deliver higher currents, however, the educational purpose (hand winding of the transformer) and thermal stress on the switching controller were considered (the peak current of the controller’s MOSFET is around 2.3A, at 7A). The controller chip is KA1M0565, which operates using a 470K startup resistor and a small auxiliary winding on the transformer. The transformers ferrite core is ER28-17-11, and the switching frequency is 67KHz. A potentiometer allows the user to adjust the output voltage precisely and set it to 12V.
To design the schematic and PCB, I used Altium Designer 24 and the Octopart website to quickly gather the necessary component information and generate the BOM. I used the Siglent SDL1020X-E DC Load and Siglent SDS2102X Plus oscilloscope to test the board for voltage drop, current delivery, and output noise. At the maximum output current, the output voltage drop is around 40mV only. 12V-7A AC to DC Switching Power Supply [SMPS]](https://i.ytimg.com/vi/etXycWuu9Gk/mqdefault.jpg)
