Uploaded August 2023 | Updated September 2026, 1 week ago
In this video I will show you how to install the XTOOL RA2 Rotary Switch that was developed to address the issue of having to plug and unplug connectors each time you want to use the RA2 tool. This video shows the installation process on the front of the D1 Pro.
Now you can easily change between rotary and regular y-axis functions. Normally you would have to connect/disconnect the cables from the rotary and mainboard which eventually leads to the small connectors and wires breaking. It is still recommended to power off your machine while switching between the Y motor functions as a precaution to protect the stepper motor drivers on the main control board.
With the RA2 switch you can leave the cables plugged in and simply place your RA2 attachment to the side when not in use. You no longer have to be concerned with fatiguing the small connectors and cables.
The XTOOL RA2 Pro is a very versatile rotary attachment that is compatible with more than just the XTOOL cutters and engravers. Therefore this switch can be used on various other laser cutters and engravers with the correct connectors.
This kit comes with the connector required for the XTool D1 Pro and is compatible with the various 10W/20W/40W mainboards.
The assembly easily mounts to the front of the Xtool D1 Pro frame with included high strength mounting tape. Since the making of this video, a second version of the switch has been developed that can be mounted on the front of the machine or on the inside of the frame which is better if you are using the XTOOL enclosure.
You can find the updated rotary switch here:
► embracemaking.com/products/xtool-ra2-y-axis-switch
You can find the instructions to mount this switch on the inside of the frame here:
► youtu.be/DhD66MGV8f8
Original RA2 tutorial video:
► youtu.be/Znsc8WNEM04
Also seen in this video...
RA2 Tilt Mechanism
► embracemaking.com/products/xtool-ra2-pro-tilt-mechanism-kit
PCB and Button Cover Kit
► embracemaking.com/products/xtool-d1-pro-pcb-and-button-cover-kit
Fume Extractor Nozzles
10W
► embracemaking.com/products/xtool-d1-pro-10w-fume-extraction-nozzle
20W
► embracemaking.com/products/xtool-d1-pro-20w-fume-extraction-nozzle
40W
► embracemaking.com/products/xtool-d1-pro-40w-fume-extraction-nozzle
As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
XTOOL RA2 PRO
► xtool.com/collections/accessory/products/xtool-ra2-pro-for-d1-with-risers?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 10W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 20W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 40W
► xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=43722824646895
Laser Proof Silicone Work Surface Mat (20" x 28")
► amzn.to/3zDyMG7
Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► amzn.to/3A0Fzv1
#xtool #ra2 #engraving
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor.
Follow me on Instagram!
► instagram.com/embracemaking
In this video I will show you how to install the XTOOL RA2 Rotary Switch that was developed to address the issue of having to plug and unplug connectors each time you want to use the RA2 tool. This video shows the installation process on the front of the D1 Pro.
Now you can easily change between rotary and regular y-axis functions. Normally you would have to connect/disconnect the cables from the rotary and mainboard which eventually leads to the small connectors and wires breaking. It is still recommended to power off your machine while switching between the Y motor functions as a precaution to protect the stepper motor drivers on the main control board.
With the RA2 switch you can leave the cables plugged in and simply place your RA2 attachment to the side when not in use. You no longer have to be concerned with fatiguing the small connectors and cables.
The XTOOL RA2 Pro is a very versatile rotary attachment that is compatible with more than just the XTOOL cutters and engravers. Therefore this switch can be used on various other laser cutters and engravers with the correct connectors.
This kit comes with the connector required for the XTool D1 Pro and is compatible with the various 10W/20W/40W mainboards.
The assembly easily mounts to the front of the Xtool D1 Pro frame with included high strength mounting tape. Since the making of this video, a second version of the switch has been developed that can be mounted on the front of the machine or on the inside of the frame which is better if you are using the XTOOL enclosure.
You can find the updated rotary switch here:
► embracemaking.com/products/xtool-ra2-y-axis-switch
You can find the instructions to mount this switch on the inside of the frame here:
► youtu.be/DhD66MGV8f8
Original RA2 tutorial video:
► youtu.be/Znsc8WNEM04
Also seen in this video...
RA2 Tilt Mechanism
► embracemaking.com/products/xtool-ra2-pro-tilt-mechanism-kit
PCB and Button Cover Kit
► embracemaking.com/products/xtool-d1-pro-pcb-and-button-cover-kit
Fume Extractor Nozzles
10W
► embracemaking.com/products/xtool-d1-pro-10w-fume-extraction-nozzle
20W
► embracemaking.com/products/xtool-d1-pro-20w-fume-extraction-nozzle
40W
► embracemaking.com/products/xtool-d1-pro-40w-fume-extraction-nozzle
As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
XTOOL RA2 PRO
► xtool.com/collections/accessory/products/xtool-ra2-pro-for-d1-with-risers?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 10W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 20W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 40W
► xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=43722824646895
Laser Proof Silicone Work Surface Mat (20" x 28")
► amzn.to/3zDyMG7
Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► amzn.to/3A0Fzv1
#xtool #ra2 #engraving
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor.
Follow me on Instagram!
► instagram.com/embracemaking
