Uploaded July 2022 | Updated September 2026, 1 week ago
In this video I will walk you through the set up of the Creality Ender 3 S1 and show you what to look for during the assembly of this printer. We will investigate the common errors of 3D printer assembly and some simple considerations for the construction of this machine and 3D printers in general.
I hope to provide you with insight into what is involved with putting this printer together if you are considering purchasing this machine. If you would like to find the best price and want to support this channel, check the link below. As an Amazon Associate I may earn a small commission (at no extra cost to you):
► amzn.to/3XJHtMx
as they provided me with this machine for the making of this video. This wouldn't be possible without them and I would like to sincerely thank them for lending me this printer.
If you have already purchased this printer, I hope this video provides you with the details required to achieve beautiful prints in a short period of time.
To download the files for the filament guide, see the following link to my Printables page. Be sure to give it a rating or a like as a simple way of supporting my work:
► printables.com/model/242704-creality-ender-3-s1-filament-roller-guide
If you are looking to print the "smooth spool holder" modification shown in the video, see the link below. All I ask in return is that you engage with my content; comment or please like this video and/or the spool holder on my Printables page.
► printables.com/model/177345-creality-smooth-spool-holder-upgrade
If you cannot print in TPU and would like to support my work, you can also purchase the spool holder here:
► embracemaking.com/products/creality-smooth-spool-holder
Overall I was very pleased with this machine over the several months I was able to spend with it. I thought it provided great value relative to the cost of the machine and it is basically a very well equipped Ender 3 V2 out of the box.
You will save time and money going with this machine over the Ender 3 V2 as most of the common upgrades come standard on the S1.
I would recommend this printer to anyone looking for a "out-of-the-box" solution for general use. You can be up and running in next to no time, especially with so many available slicer profiles for the Ender 3 series of printers.
If you have any questions, comments, or suggestions, I would love to hear from you in the comments section below.
Thank you for watching!
#creality #ender3 #3dprinting
0:00 Intro
0:36 Unboxing
1:26 General Assembly
5:45 Electronics and Wiring
7:47 Quality Checks
10:05 Z Offset
13:15 Bed Levelling
16:24 Load Filament
18:19 First Prints
23:45 Filament Guide Upgrade
27:09 More Example Prints
29:30 Final Thoughts
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
In this video I will walk you through the set up of the Creality Ender 3 S1 and show you what to look for during the assembly of this printer. We will investigate the common errors of 3D printer assembly and some simple considerations for the construction of this machine and 3D printers in general.
I hope to provide you with insight into what is involved with putting this printer together if you are considering purchasing this machine. If you would like to find the best price and want to support this channel, check the link below. As an Amazon Associate I may earn a small commission (at no extra cost to you):
► amzn.to/3XJHtMx
as they provided me with this machine for the making of this video. This wouldn't be possible without them and I would like to sincerely thank them for lending me this printer.
If you have already purchased this printer, I hope this video provides you with the details required to achieve beautiful prints in a short period of time.
To download the files for the filament guide, see the following link to my Printables page. Be sure to give it a rating or a like as a simple way of supporting my work:
► printables.com/model/242704-creality-ender-3-s1-filament-roller-guide
If you are looking to print the "smooth spool holder" modification shown in the video, see the link below. All I ask in return is that you engage with my content; comment or please like this video and/or the spool holder on my Printables page.
► printables.com/model/177345-creality-smooth-spool-holder-upgrade
If you cannot print in TPU and would like to support my work, you can also purchase the spool holder here:
► embracemaking.com/products/creality-smooth-spool-holder
Overall I was very pleased with this machine over the several months I was able to spend with it. I thought it provided great value relative to the cost of the machine and it is basically a very well equipped Ender 3 V2 out of the box.
You will save time and money going with this machine over the Ender 3 V2 as most of the common upgrades come standard on the S1.
I would recommend this printer to anyone looking for a "out-of-the-box" solution for general use. You can be up and running in next to no time, especially with so many available slicer profiles for the Ender 3 series of printers.
If you have any questions, comments, or suggestions, I would love to hear from you in the comments section below.
Thank you for watching!
#creality #ender3 #3dprinting
0:00 Intro
0:36 Unboxing
1:26 General Assembly
5:45 Electronics and Wiring
7:47 Quality Checks
10:05 Z Offset
13:15 Bed Levelling
16:24 Load Filament
18:19 First Prints
23:45 Filament Guide Upgrade
27:09 More Example Prints
29:30 Final Thoughts
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
