Uploaded January 2025 | Updated September 2026, 1 week ago
In this video I will take you in depth into getting started with the Big Tree Tech PANDA TOUCH on the Bambu Lab P1P and P1S 3D printers. The Panda Touch is a great touch screen upgrade for the P1P and P1S printers that provides more functionality and ease of use over the standard equipment LCD controller.
There are some other guides on YouTube but I have found they are missing a lot of critical information about the connectivity issues you might face, how to solve them, and things to watch out for during the process. I will also cover the control limitations and the key to unlocking them with cloud mode.
If you would like to support my work, please consider using the link below to purchase your own PANDA TOUCH - I would earn a small commission at no extra cost to you. This small click goes a long way to supporting your favorite creators, and just be sure you do not have the 'Honey' browser extension installed as it does not find you the best discount codes and it will steal any affiliate sales from the people who created the content and brought you to that link:
► shareasale.com/r.cfm?b=2510002&u=3650799&m=118144&urllink=&afftrack=
If you're looking for the P1S, you can find that here:
► shareasale.com/r.cfm?b=2377904&u=3650799&m=138211&urllink=&afftrack=
and the less expensive P1P is here:
► shareasale.com/r.cfm?b=2354726&u=3650799&m=138211&urllink=&afftrack=
Additionally, you can also find the Embrace Making Universal Spool Stand here:
► embracemaking.com/products/universal-top-mount-spool-stand
and the hex screwdriver kit here:
► embracemaking.com/products/hex-screwdriver-set-1-5mm-to-3mm
All of the supported applications and links to the custom parts can be found here:
► embracemaking.com/blogs/resources/universal-top-mount-spool-stand-accessories-and-adapters
If you're specifically looking for the parts for the P1P / P1S, you can find those here:
► makerworld.com/en/models/987536#profileId-962489
Are you also looking for the AMS compatible refill master spool? That one is here:
► makerworld.com/en/models/928537#profileId-892121
Please be aware that at the time of making and editing this video, Bambu Lab is considering changing the ability for third party applications to control many key functions of their printers in future firmware updates. It is very important to pay attention to your Bambu Lab P1P and P1S firmware version and cross check on the Panda Touch Wiki to ensure compatibility:
► bttwiki.com/PandaTouch.html
Official statement from Big Tree Tech:
► https://x.com/BigTreeTech/status/1880150473707323695
Here you can find the latest Big Tree Tech Panda Touch firmware. Also, keep in mind that the Panda Touch can be converted to the K-Touch with a simple firmware change!
► github.com/bigtreetech/PandaTouch/tree/master/Firmware
If you are new to 3D printing I still think you should have realistic expectations of the learning curve involved with the hobby. The machine works well out of the box but if you happen to run into issues you will likely get frustrated at first. Take a deep breath, stick with it and don't give up! It doesn't matter if you have a Creality, Bambu Labs, or any other popular high speed printer of this era, eventually you will need to do some troubleshooting. Stick with it!
A few other cool tools and things for 3D printer enthusiasts. (As an Amazon associate I may earn a small commission at NO extra cost to you)
Bambu Lab Filaments Direct From Bambu Lab:
► shareasale.com/r.cfm?b=2354730&u=3650799&m=138211&urllink=&afftrack=
Polymaker PolyTerra PLA:
► amzn.to/3sdhK1x
eSUN PLA+ (Another one of my favorite filaments):
► amzn.to/3QA4tuq
Electric Screwdriver:
► amzn.to/3JRbbZe
Rechargeable Batteries:
► amzn.to/3W6dAoK
0:00 Intro
0:27 Unboxing
1:09 Assembly
3:24 Setup
8:35 Upgrade
14:22 AMS
17:31 Outro
#bambulab #p1p #p1s #bigtreetech
*********************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor.
Follow me on Instagram!
► instagram.com/embracemaking
In this video I will take you in depth into getting started with the Big Tree Tech PANDA TOUCH on the Bambu Lab P1P and P1S 3D printers. The Panda Touch is a great touch screen upgrade for the P1P and P1S printers that provides more functionality and ease of use over the standard equipment LCD controller.
There are some other guides on YouTube but I have found they are missing a lot of critical information about the connectivity issues you might face, how to solve them, and things to watch out for during the process. I will also cover the control limitations and the key to unlocking them with cloud mode.
If you would like to support my work, please consider using the link below to purchase your own PANDA TOUCH - I would earn a small commission at no extra cost to you. This small click goes a long way to supporting your favorite creators, and just be sure you do not have the 'Honey' browser extension installed as it does not find you the best discount codes and it will steal any affiliate sales from the people who created the content and brought you to that link:
► shareasale.com/r.cfm?b=2510002&u=3650799&m=118144&urllink=&afftrack=
If you're looking for the P1S, you can find that here:
► shareasale.com/r.cfm?b=2377904&u=3650799&m=138211&urllink=&afftrack=
and the less expensive P1P is here:
► shareasale.com/r.cfm?b=2354726&u=3650799&m=138211&urllink=&afftrack=
Additionally, you can also find the Embrace Making Universal Spool Stand here:
► embracemaking.com/products/universal-top-mount-spool-stand
and the hex screwdriver kit here:
► embracemaking.com/products/hex-screwdriver-set-1-5mm-to-3mm
All of the supported applications and links to the custom parts can be found here:
► embracemaking.com/blogs/resources/universal-top-mount-spool-stand-accessories-and-adapters
If you're specifically looking for the parts for the P1P / P1S, you can find those here:
► makerworld.com/en/models/987536#profileId-962489
Are you also looking for the AMS compatible refill master spool? That one is here:
► makerworld.com/en/models/928537#profileId-892121
Please be aware that at the time of making and editing this video, Bambu Lab is considering changing the ability for third party applications to control many key functions of their printers in future firmware updates. It is very important to pay attention to your Bambu Lab P1P and P1S firmware version and cross check on the Panda Touch Wiki to ensure compatibility:
► bttwiki.com/PandaTouch.html
Official statement from Big Tree Tech:
► https://x.com/BigTreeTech/status/1880150473707323695
Here you can find the latest Big Tree Tech Panda Touch firmware. Also, keep in mind that the Panda Touch can be converted to the K-Touch with a simple firmware change!
► github.com/bigtreetech/PandaTouch/tree/master/Firmware
If you are new to 3D printing I still think you should have realistic expectations of the learning curve involved with the hobby. The machine works well out of the box but if you happen to run into issues you will likely get frustrated at first. Take a deep breath, stick with it and don't give up! It doesn't matter if you have a Creality, Bambu Labs, or any other popular high speed printer of this era, eventually you will need to do some troubleshooting. Stick with it!
A few other cool tools and things for 3D printer enthusiasts. (As an Amazon associate I may earn a small commission at NO extra cost to you)
Bambu Lab Filaments Direct From Bambu Lab:
► shareasale.com/r.cfm?b=2354730&u=3650799&m=138211&urllink=&afftrack=
Polymaker PolyTerra PLA:
► amzn.to/3sdhK1x
eSUN PLA+ (Another one of my favorite filaments):
► amzn.to/3QA4tuq
Electric Screwdriver:
► amzn.to/3JRbbZe
Rechargeable Batteries:
► amzn.to/3W6dAoK
0:00 Intro
0:27 Unboxing
1:09 Assembly
3:24 Setup
8:35 Upgrade
14:22 AMS
17:31 Outro
#bambulab #p1p #p1s #bigtreetech
*********************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor.
Follow me on Instagram!
► instagram.com/embracemaking
