Uploaded March 2024 | Updated September 2026, 1 week ago
In this video I will take you in depth into getting started with the XTOOL F1 and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.
Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of the limited space of the XTOOL F1. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the F1.
F1 Rotary Tilt Kit:
► embracemaking.com/products/xtool-f1-ra2-pro-tilt-mechanism-kit
Back Stop and Bubble Level Holder:
► embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit
Since the F1 does not come with laser safety glasses, I have made safety glasses available that protect your eyes from both blue and infrared laser light. (Perfect for the F1). You can find those glasses here:
► embracemaking.com/products/laser-safety-glasses-blue-diode-ir
Haven't purchased your XTOOL F1 yet? Links below for the best XTool Prices:
XTOOL F1:
► xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
XTOOL F1 + Smoke Purifier Bundle:
► xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=44034709520623
F1 RA2 Cable:
► xtool.com/products/xtool-ra2-pro-cable-for-xtool-f1?_pos=1&_sid=c853f97ee&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the XTOOL F1 as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:
F1 V-Block, Pencil, Bottle Opener Jig
► embracemaking.com/products/xtool-f1-v-block-pencil-bottle-opener-jig
I also have another fixture 2-pack kit for circular objects and other popular items:
F1 Multi-Fixture Kit:
► embracemaking.com/products/xtool-f1-multi-jig-and-circular-fixture-kit
If you need fume extraction solutions for the XTOOL F1, see below:
Fume Filtration and Extraction
► embracemaking.com/collections/fume-extraction
If you are looking for products or items I've used with the F1 in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
Electric Screwdriver:
► amzn.to/3P43fpz
Digital Calipers:
► amzn.to/48IQh7w
Tall Stainless Tumbler 4-Pack
► amzn.to/3CWBXLh
12oz Mug With Handle (8 Pack)
► amzn.to/3wqDadE
12oz Tumbler With Straw (12 Pack)
► amzn.to/3HZswgC
20oz Tumbler With Straw (25 Pack)
► amzn.to/48hQONK
144 Wood Pencil Pack
► amzn.to/3uzGTFq
100 Wood Pencil Pack
► amzn.to/42XN8jf
50 Wood Pencil Pack
► amzn.to/3UIzbTT
250pcs Aluminum Bottle Openers
► amzn.to/48iV7s2
100pcs Aluminum Bottle Openers
► amzn.to/48sdjja
48pcs Aluminum Bottle Openers
► amzn.to/4bEINoQ
20pcs Aluminum Bottle Openers
► amzn.to/49UZs67
Always remember to practice proper laser safety. These lasers can seriously harm your eyes or indirectly (your lungs/health). ALWAYS wear your safety glasses! DO NOT CUT vinyl materials like PVC. Check this list for hazardous materials before cutting:
► https://cloud.wikis.utexas.edu/wiki/spaces/SOAdigitech/pages/75236331/Prohibited+Laser+Cutter+Materials
Thank you @xToollaser
0:00 Intro
0:42 F1 & RA2 Basics
7:34 Move Your Motor
10:19 RA2 Tilt Mechanism Upgrade
15:02 Back Stop and Bubble Level
16:31 Tilt Mechanism With F1
18:34 Tumbler With Taper
20:53 Straight Mug With Handle
27:46 Long Tumbler Without Handle
31:08 Large Diameter Tumbler
32:23 No Rotary? No Problem!
36:18 Pencil Engraving Fixture
38:00 Bottle Opener Engraving Fixture
39:48 Outro
#tumblertutorial #engraving #xtool
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
In this video I will take you in depth into getting started with the XTOOL F1 and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.
Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of the limited space of the XTOOL F1. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the F1.
F1 Rotary Tilt Kit:
► embracemaking.com/products/xtool-f1-ra2-pro-tilt-mechanism-kit
Back Stop and Bubble Level Holder:
► embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit
Since the F1 does not come with laser safety glasses, I have made safety glasses available that protect your eyes from both blue and infrared laser light. (Perfect for the F1). You can find those glasses here:
► embracemaking.com/products/laser-safety-glasses-blue-diode-ir
Haven't purchased your XTOOL F1 yet? Links below for the best XTool Prices:
XTOOL F1:
► xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
XTOOL F1 + Smoke Purifier Bundle:
► xtool.com/products/xtool-f1?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=44034709520623
F1 RA2 Cable:
► xtool.com/products/xtool-ra2-pro-cable-for-xtool-f1?_pos=1&_sid=c853f97ee&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the XTOOL F1 as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:
F1 V-Block, Pencil, Bottle Opener Jig
► embracemaking.com/products/xtool-f1-v-block-pencil-bottle-opener-jig
I also have another fixture 2-pack kit for circular objects and other popular items:
F1 Multi-Fixture Kit:
► embracemaking.com/products/xtool-f1-multi-jig-and-circular-fixture-kit
If you need fume extraction solutions for the XTOOL F1, see below:
Fume Filtration and Extraction
► embracemaking.com/collections/fume-extraction
If you are looking for products or items I've used with the F1 in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
Electric Screwdriver:
► amzn.to/3P43fpz
Digital Calipers:
► amzn.to/48IQh7w
Tall Stainless Tumbler 4-Pack
► amzn.to/3CWBXLh
12oz Mug With Handle (8 Pack)
► amzn.to/3wqDadE
12oz Tumbler With Straw (12 Pack)
► amzn.to/3HZswgC
20oz Tumbler With Straw (25 Pack)
► amzn.to/48hQONK
144 Wood Pencil Pack
► amzn.to/3uzGTFq
100 Wood Pencil Pack
► amzn.to/42XN8jf
50 Wood Pencil Pack
► amzn.to/3UIzbTT
250pcs Aluminum Bottle Openers
► amzn.to/48iV7s2
100pcs Aluminum Bottle Openers
► amzn.to/48sdjja
48pcs Aluminum Bottle Openers
► amzn.to/4bEINoQ
20pcs Aluminum Bottle Openers
► amzn.to/49UZs67
Always remember to practice proper laser safety. These lasers can seriously harm your eyes or indirectly (your lungs/health). ALWAYS wear your safety glasses! DO NOT CUT vinyl materials like PVC. Check this list for hazardous materials before cutting:
► https://cloud.wikis.utexas.edu/wiki/spaces/SOAdigitech/pages/75236331/Prohibited+Laser+Cutter+Materials
Thank you @xToollaser
0:00 Intro
0:42 F1 & RA2 Basics
7:34 Move Your Motor
10:19 RA2 Tilt Mechanism Upgrade
15:02 Back Stop and Bubble Level
16:31 Tilt Mechanism With F1
18:34 Tumbler With Taper
20:53 Straight Mug With Handle
27:46 Long Tumbler Without Handle
31:08 Large Diameter Tumbler
32:23 No Rotary? No Problem!
36:18 Pencil Engraving Fixture
38:00 Bottle Opener Engraving Fixture
39:48 Outro
#tumblertutorial #engraving #xtool
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
