Uploaded July 2021 | Updated September 2026, 1 week ago
Are you looking for a reliable and affordable PLA+ for your general 3D printing needs? IIID Max PLA+ is an economical filament that prints buttery smooth at a variety of temperatures and is very easy to use.
In this video I will take you through my print settings and show you how stable this PLA material is at a variety of printing temperatures. We'll go through some interesting prints and inspect them for quality and precision.
For this video I also designed a metric t handle hex set holder for my peg board. If you guys are looking for that model, I made it available here:
► thingiverse.com/thing:4918438
All of the prints in this video were made on the ANET ET5X (unless otherwise noted in the video). This is a very economical printer comparable to the Creality CR-10 series so you don't need expensive equipment to pull off nice prints like these!
I would highly recommend this filament for general purpose 3D printing and you can find it at Digitmakers.ca
► digitmakers.ca/collections/vendors?q=IIID%20Max
Check out the variety of attractive colors this filament comes in and give some a try. You won't be disappointed!
If you guys have any questions or comments please leave them below and I will try and respond to each and every one of you :)
Disclaimer: I was not paid in any way to do this video. The only form of compensation I received was the two sample rolls of filament (gold and orange).
#MAKER #3DPRINTING #FILAMENT
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embraceracing 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
Car Content:
► Mighty Car Mods
youtube.com/channel/UCgJRL30YS6XFxq9Ga8W2J3A
► Drivetribe
youtube.com/channel/UChiwLDIBJrV5SxqdixMHm
Are you looking for a reliable and affordable PLA+ for your general 3D printing needs? IIID Max PLA+ is an economical filament that prints buttery smooth at a variety of temperatures and is very easy to use.
In this video I will take you through my print settings and show you how stable this PLA material is at a variety of printing temperatures. We'll go through some interesting prints and inspect them for quality and precision.
For this video I also designed a metric t handle hex set holder for my peg board. If you guys are looking for that model, I made it available here:
► thingiverse.com/thing:4918438
All of the prints in this video were made on the ANET ET5X (unless otherwise noted in the video). This is a very economical printer comparable to the Creality CR-10 series so you don't need expensive equipment to pull off nice prints like these!
I would highly recommend this filament for general purpose 3D printing and you can find it at Digitmakers.ca
► digitmakers.ca/collections/vendors?q=IIID%20Max
Check out the variety of attractive colors this filament comes in and give some a try. You won't be disappointed!
If you guys have any questions or comments please leave them below and I will try and respond to each and every one of you :)
Disclaimer: I was not paid in any way to do this video. The only form of compensation I received was the two sample rolls of filament (gold and orange).
#MAKER #3DPRINTING #FILAMENT
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embraceracing 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
youtube.com/channel/UCjgpFI5dU-D1-kh9H1muoxQ
► Adam Savage Tested
youtube.com/channel/UCiDJtJKMICpb9B1qf7qjEOA
► Thomas Sanladerer
youtube.com/user/ThomasSanladerer
Car Content:
► Mighty Car Mods
youtube.com/channel/UCgJRL30YS6XFxq9Ga8W2J3A
► Drivetribe
youtube.com/channel/UChiwLDIBJrV5SxqdixMHm
