Uploaded September 2023 | Updated September 2026, 1 week ago
In this video I will show you how to install the CREALITY enclosure LED lighting system designed to enhance visibility inside the laser or 3D printing tent.
Many people use their laser cutting and engraving machines or 3D printers in their garage, workshop, or other potentially dimly lit areas. This makes it difficult to see the fine details of your work and to setup and monitor your workpieces. Additionally, the laser enclosure uses an orange tinted window making it difficult to see inside. The 3D printing tents have windows that are especially small making it even darker inside.
This LED upgrade kit provides you with two LED light bars that securely mount to the enclosure frame and provide a diffused daylight color temperature (with min. LED CRI of 90) for comfortable and natural viewing.
The LED mounts are diffused and mounted on the side bars aimed downwards to prevent glare. The entire kit is plug and play and no complex wiring is involved. An inline switch makes it easy to turn the lighting system on and off as required.
Note that the length of the wires is 2m (~6ft). They will be compatible with other barrel jack wiring extensions. Please use the contact form on this website to discuss if you would like to know how to extend the wires if your wall outlet is very far away.
You can find the CREALITY enclosure LED Lighting Kit here:
► embracemaking.com/products/creality-laser-enclosure-led-lighting-system
Perhaps you saw some other interesting upgrades in this video...
Flange adapters for ventilating the enclosures:
► embracemaking.com/products/3-inch-76mm-flange-to-4-inch-101mm-hose-adapter
Video about the Creality fume filtration solutions:
► youtu.be/VuCol-Xv3rI
Other popular Creality modifications and upgrades I offer:
Falcon 2 Laser Series:
► embracemaking.com/collections/creality-falcon-2
Creality Ender 7 Upgrades:
► embracemaking.com/collections/creality-ender-7/Ender-7
Creality CR-10 Smart Upgrades:
► embracemaking.com/collections/creality-cr10-smart/CR10-Smart
Creality CR6-SE Series:
► embracemaking.com/collections/creality-cr-6-se
Looking for a laser cutter or laser accessories?
As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
XTOOL RA2 PRO
► xtool.com/collections/accessory/products/xtool-ra2-pro-for-d1-with-risers?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 10W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 20W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 40W
► xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=43722824646895
Laser Proof Silicone Work Surface Mat (20" x 28")
► amzn.to/3zDyMG7
Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► amzn.to/3A0Fzv1
#creality #lasercutting #ledlighting
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor.
Follow me on Instagram!
► instagram.com/embracemaking
In this video I will show you how to install the CREALITY enclosure LED lighting system designed to enhance visibility inside the laser or 3D printing tent.
Many people use their laser cutting and engraving machines or 3D printers in their garage, workshop, or other potentially dimly lit areas. This makes it difficult to see the fine details of your work and to setup and monitor your workpieces. Additionally, the laser enclosure uses an orange tinted window making it difficult to see inside. The 3D printing tents have windows that are especially small making it even darker inside.
This LED upgrade kit provides you with two LED light bars that securely mount to the enclosure frame and provide a diffused daylight color temperature (with min. LED CRI of 90) for comfortable and natural viewing.
The LED mounts are diffused and mounted on the side bars aimed downwards to prevent glare. The entire kit is plug and play and no complex wiring is involved. An inline switch makes it easy to turn the lighting system on and off as required.
Note that the length of the wires is 2m (~6ft). They will be compatible with other barrel jack wiring extensions. Please use the contact form on this website to discuss if you would like to know how to extend the wires if your wall outlet is very far away.
You can find the CREALITY enclosure LED Lighting Kit here:
► embracemaking.com/products/creality-laser-enclosure-led-lighting-system
Perhaps you saw some other interesting upgrades in this video...
Flange adapters for ventilating the enclosures:
► embracemaking.com/products/3-inch-76mm-flange-to-4-inch-101mm-hose-adapter
Video about the Creality fume filtration solutions:
► youtu.be/VuCol-Xv3rI
Other popular Creality modifications and upgrades I offer:
Falcon 2 Laser Series:
► embracemaking.com/collections/creality-falcon-2
Creality Ender 7 Upgrades:
► embracemaking.com/collections/creality-ender-7/Ender-7
Creality CR-10 Smart Upgrades:
► embracemaking.com/collections/creality-cr10-smart/CR10-Smart
Creality CR6-SE Series:
► embracemaking.com/collections/creality-cr-6-se
Looking for a laser cutter or laser accessories?
As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
XTOOL RA2 PRO
► xtool.com/collections/accessory/products/xtool-ra2-pro-for-d1-with-risers?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 10W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 20W
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 40W
► xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=43722824646895
Laser Proof Silicone Work Surface Mat (20" x 28")
► amzn.to/3zDyMG7
Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► amzn.to/3A0Fzv1
#creality #lasercutting #ledlighting
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor.
Follow me on Instagram!
► instagram.com/embracemaking
