Uploaded September 2026 | Updated November 2026, 1 day ago
The Snapmaker U1 is a high-speed CoreXY toolchanger 3D printer built around the a 4 toolhead system. By swapping independent, dedicated hotends in 5 seconds rather than retracting and purging filament through a single nozzle, it dramatically accelerates multi-color printing while reducing filament waste by up to 85%!
β Looking for the Snapmaker U1? Use my affiliate link below to support the channel (at NO extra cost to you!)
π snapmaker.sjv.io/X4vLN3
Key Features:
π 4-Toolhead tool changer system: Swaps complete, preheated hotends in 5 seconds with zero single-nozzle purge delays.
π Up to 85% Waste Reduction: Eliminates excessive filament waste ("printer poop") and slashes print times on multi-color projects.
π 270 Γ 270 Γ 270 mm Build Volume: Spacious cubic print area for large models or batch production.
π Seamlessly combine rigid plastics (PLA/PETG), flexible TPU, and support materials (PVA) in a single print without cross-contamination.
Looking for the projects in this video. See the links below:
β Novelty Glasses
π makerworld.com/en/models/1009035
β Gridfinity Tools
π Baseplate Layout: gridfinitylayouttool.com
π Bin Generator: gridfinitylayouttool.com/gridfinity-bin-generator
β Pokeball
π makerworld.com/en/models/2862329
β Bag Clips
π Long style: makerworld.com/en/models/1103995
π Short style: makerworld.com/en/models/1613760
β Nightstand Organizer
π makerworld.com/en/models/3331671
π All links to materials required for the nightstand organizer at the link above.
π Bump mesh tool for custom textures: bumpmesh.com
β Chibi Style Racer
π makerworld.com/en/models/2818728
Looking for other Maker tools and gear to help on your journey? See the links below, as an Amazon associate I may earn a small commission (at NO extra cost to you!).
β Starrett Digital Calipers (Actual good calipers, no cheap knock-offs)
π https://link.amazon/B0bnTLj0a
β Deburring Tool Kit (Aluminum Handle nice quality)
π https://link.amazon/B09Fi4aba
β Vertical Press Brass Heat Set Insert Kit
π https://link.amazon/A0hqdJksG
β Magigoo All-in-one bed adhesion promotor
π https://link.amazon/B00tUZX3Z
β Hakko Wire Cutters (2-pack, perfect for cutting filament)
π https://link.amazon/B05T5kgtq
β Dremel Rotary Kit
π https://link.amazon/B0haf5Qzu
β Fanttik Mini Rotary Kit for 3D printer sanding and grinding
π https://link.amazon/B0cTpwkLa
β HOTO SnapBloq Electric Screwdriver Kit
π https://link.amazon/B0g5ILxWD
0:00 Intro
1:02 Unboxing and Setup
7:30 First Print Novelty Glasses
13:33 Gridfinity Project
16:46 Functional Pokeball
21:03 PCTG Bag Clips
22:45 Dual Color Print
25:37 Large Night Stand Organizer Project
36:57 Chibi Style Moto Racer
39:39 Cool Bonus Features
40:15 Review Summary
Be sure to subscribe and like this video so you don't miss more incredible content!
#snapmakeru1 #snapmaker #3dprinting
Thank you @Snapmaker for sending the U1 for review :)
*******************************************************
Follow me on Instagram!
βΊ instagram.com/embracemaking
The Snapmaker U1 is a high-speed CoreXY toolchanger 3D printer built around the a 4 toolhead system. By swapping independent, dedicated hotends in 5 seconds rather than retracting and purging filament through a single nozzle, it dramatically accelerates multi-color printing while reducing filament waste by up to 85%!
β Looking for the Snapmaker U1? Use my affiliate link below to support the channel (at NO extra cost to you!)
π snapmaker.sjv.io/X4vLN3
Key Features:
π 4-Toolhead tool changer system: Swaps complete, preheated hotends in 5 seconds with zero single-nozzle purge delays.
π Up to 85% Waste Reduction: Eliminates excessive filament waste ("printer poop") and slashes print times on multi-color projects.
π 270 Γ 270 Γ 270 mm Build Volume: Spacious cubic print area for large models or batch production.
π Seamlessly combine rigid plastics (PLA/PETG), flexible TPU, and support materials (PVA) in a single print without cross-contamination.
Looking for the projects in this video. See the links below:
β Novelty Glasses
π makerworld.com/en/models/1009035
β Gridfinity Tools
π Baseplate Layout: gridfinitylayouttool.com
π Bin Generator: gridfinitylayouttool.com/gridfinity-bin-generator
β Pokeball
π makerworld.com/en/models/2862329
β Bag Clips
π Long style: makerworld.com/en/models/1103995
π Short style: makerworld.com/en/models/1613760
β Nightstand Organizer
π makerworld.com/en/models/3331671
π All links to materials required for the nightstand organizer at the link above.
π Bump mesh tool for custom textures: bumpmesh.com
β Chibi Style Racer
π makerworld.com/en/models/2818728
Looking for other Maker tools and gear to help on your journey? See the links below, as an Amazon associate I may earn a small commission (at NO extra cost to you!).
β Starrett Digital Calipers (Actual good calipers, no cheap knock-offs)
π https://link.amazon/B0bnTLj0a
β Deburring Tool Kit (Aluminum Handle nice quality)
π https://link.amazon/B09Fi4aba
β Vertical Press Brass Heat Set Insert Kit
π https://link.amazon/A0hqdJksG
β Magigoo All-in-one bed adhesion promotor
π https://link.amazon/B00tUZX3Z
β Hakko Wire Cutters (2-pack, perfect for cutting filament)
π https://link.amazon/B05T5kgtq
β Dremel Rotary Kit
π https://link.amazon/B0haf5Qzu
β Fanttik Mini Rotary Kit for 3D printer sanding and grinding
π https://link.amazon/B0cTpwkLa
β HOTO SnapBloq Electric Screwdriver Kit
π https://link.amazon/B0g5ILxWD
0:00 Intro
1:02 Unboxing and Setup
7:30 First Print Novelty Glasses
13:33 Gridfinity Project
16:46 Functional Pokeball
21:03 PCTG Bag Clips
22:45 Dual Color Print
25:37 Large Night Stand Organizer Project
36:57 Chibi Style Moto Racer
39:39 Cool Bonus Features
40:15 Review Summary
Be sure to subscribe and like this video so you don't miss more incredible content!
#snapmakeru1 #snapmaker #3dprinting
Thank you @Snapmaker for sending the U1 for review :)
*******************************************************
Follow me on Instagram!
βΊ instagram.com/embracemaking










